• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.117-124
• /
• 2004

The mixing enhancement is one of the most important problems for the development of scramjet engines. The influence of the streamwise vortices produced by a ramp in a unheated supersonic flow on the mixing of twin jets injected from its base was experimentally investigated. Nominal Mach number of the main airstream and of the twin jets at the nozzle exits were 2.35 and 2.0, respectively. Three dimensional velocity distributions near the ramp with and without injection were measured by Particle Image Velocimetry (PIV). A pair of counter rotating streamwise vortices could be seen behind the injector without injection. On the other hand, two pairs of streamwise vortices could be seen with injection. The outer one had the same direction as the vortex pair produced by the ramp, but they were stronger than those produced by the ramp. The inner ones had the opposite directions to the outer ones. It is considered that these vortices enhance the mixing near the injector.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.523-529
• /
• 2018

Two liquids which are generally used as fuels of rockets are mixed and their mixing process is quantitatively investigated by the use of particle image velocimetry (PIV). As working fluids for the liquid mixing, Dimethylfuran (DMF) and JetA1 oils have been used. Since the specific gravity of DMF is larger than that of JetA1 oil, the DMF oil has been set at the lower part of the JetA1 oil. For better visualization of the mixing process, Rhodamin B powder has been blended into the DMF oil. An agitator having 3 blades has been used for mixing the two liquids. For quantitative visualization, a LCD monitor has been used as a light source. A color camera, camcoder, has been used for recording the mixing process. The images captured by the camcoder have been digitized into three color components, R, G, and B. The color intensities of R, G, and B have been used as the inputs of the neural network of which hidden layer has 20 neurons. Color-to-concentration calibration has been performed before commencing the main experiments. Once this calibration is completed, the temporal changes of the concentration of the DMF has been quantitatively analyzed by using the constructed measurement system.

• 한국의류산업학회지
• /
• 제8권6호
• /
• pp.721-726
• /
• 2006

In this article I visually assessed the relation between luminous source and color, and analyzed subjective recognition of color by light source and image of color, aiming at giving guidelines in selecting source of light suitable for each purpose, thereby contributing to enhanced quality of life. For this purpose, I subjectized, by applying a quantitative method, the objective measurement that employs sensory evaluation method for 14 categories of color, light and feelings in visual perception of textile colors (blue, green and yellow) by color of light source (color temperature of 2800K, 4200K and 6500K), Followings are the conclusions derived form this study. Colors of textile were differently perceived according to the color of light source. When examining common recognition of textiles in blue, green and yellow, 2800K was said to give dirty, soft and blurred image, as for 4200K clear, wide and fine feelings were said, and pure, vivid, refined and bright image were marked for 6500K. As for 2800K, it got the most low appraisals compared with others. In conclusion, image and feeling of the same colors can differ according to light source, which indicates the importance of appropriate selection of light source for purpose of use. As for yellow, the number of assessment result that shows significant difference was the smallest among the three colors. So, it can be concluded that when we consider the recognition of color in mixing different colors, mixing with yellow can result in difficulty in visually perceiving difference of colors. Therefore, it is regarded that more considerable attention is required when dealing with yellow color.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.513-516
• /
• 2007

We introduce a new copolymer alignment film made by bridge-building structure. It is a better film to decrease the image-sticking level in LCD displays. It is noted that the image-sticking was decreased by preventing ion mixing between inter-layers through high hardness. We have investigated the electrical characteristics such as pretilt angle, Residual DC, VHR by changing cure temperature and process delay time conditions of the new alignment film. In this paper, we have investigated the solution for the deep-rooted image defect and incidentally got a contrast ratio improvement by high anchoring force and hardness elevation through the new copolymer alignment film.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.164-170
• /
• 2008

This research was verified detection way of intercept vehicles and performance evaluation after system installation using image detector as detection way of ground installation. By image recognition algorithm was on the trace of moving orbit of violation vehicles for detection way of intercept vehicles. When moving orbit is located special site, utilized geometric image calibration and DC-notch filter. These are cognitive system of license plate by making signal. Then, Bright Evidence Detection and Dark Evidence Detection were applied to after mixing. It is applied to way of Backward tracking for detection way of intercept vehicles. After the field evaluation of developed system, it should be analyzed the more high than recognition rate of minimum standards 80%. It should rise in the estimation of the site applicability is highly from now.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.56-59
• /
• 2004

An experimental study has performed to identify the mixing characteristics of basket mill by using PIV and LIF techniques. The velocity fields were measured at three sectors for each two types of basket mill model and various impeller speed. To verify the results of velocity field measurement and the concentration field, LIF measurement also was performed for three cases. There was an inactive region and a descending flow to the bottom of basket mill at the original model. But when the impeller type and the guide shape were changed, internal flow structure was improved suitably for mixing and dispersion. The improvement result in increment of inflow flow rate at the basket entrance about $10\%$.

• 한국추진공학회지
• /
• 제9권4호
• /
• pp.55-65
• /
• 2005

에어 터보 램제트 엔진 연소기에서 연료와 공기의 혼합성능은 연소 효율과 안정성에 중요한 요인이 된다. 에어 터보 램제트 축소모형의 연소기에서 혼합기에 따른 혼합성능을 파악하기 위하여 두개의 꽃잎형 혼합기를 제작하였고, 각각에 대하여 연료 분포를 측정하였다. 2차원 연료 분포 측정에는 평면 레이저 유도 형광 기법을 사용하였다. 획득한 아세톤 형광 이미지는 이미지 처리 기법을 사용하여 정량적 연료 분포로 나타내었다. 이러한 연료 분포 이미지를 바탕으로 연료와 공기의 혼합성능이 좋은 혼합기를 알아내었다.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.75-81
• /
• 2003

In this paper, the study of effects of flow variables on flame structure and NOx emission concentration was performed in co-axial laminar partially premixed methane/air flames. the objectives are to reveal its effect as parameters were varied and to understand the correlation between flame structure and NOx emission characteristics in the reaction zone. equivalence ratio(${\Phi}$), fuel split degree(${\sigma}$), and mixing distance(x/D) were defined as a premixing degree and varied within $1.36{\sim}3.17$(equivalence ratio), $50{\sim}100$(fuel split degree), and $5{\sim}20$(mixing distance). the image of $OH{\ast}$ and $CH{\ast}$, and NOx concentration were obtained with an ICCD camera and a NOx analyzer. additionally the maximum intensity location of $OH{\ast}$ chemiluminescence and $CH{\ast}$ chemiluminescence were measured to compare each flame structures. In conclusion flame structure and NOx emission characteristics were changed from diffused to premixed flame when mixing degree was on the increase. the main effect on flame structure and NOx production was at first equivalence ratio(${\Phi}$), and next fuel split degree(${\sigma}$), and finally mixing distance(x/D).

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 춘계학술발표대회
• /
• pp.497-500
• /
• 2022

High-quality images and videos are being generated as technologies for deep learning-based image style translation and conversion of static images into dynamic images have developed. However, it takes a lot of time and resources to manually transform images, as well as professional knowledge due to the difficulty of natural image transformation. Therefore, in this paper, we study natural style mixing through a style conversion network using GAN and natural dynamic image generation using the First Order Motion Model network (FOMM).

• 한국추진공학회지
• /
• 제18권1호
• /
• pp.1-7
• /
• 2014

본 연구에서는 유동의 속도비와 입자의 크기가 덕티드 로켓의 2차 연소기 내의 유동 혼합 특성에 미치는 영향을 고찰하였다. 연구의 실험적 기법으로는 PIV(Particle Image Velocimetry)가 적용되고 수치적 방법으로는 LES(Large Eddy Simulation)가 사용되었다. PIV 입자로는 직경 $5{\mu}m$와 $50{\mu}m$의 폴리스틸렌이 각각 사용되었고, 속도비는 각각 5, 3, 1.5로 수행되어졌다. 고속유로를 통한 유동이 저속유로의 유동과 혼합되어 재부착점과 재순환 영역을 형성하였고, 속도비가 작을수록 재순환 영역이 커졌다. 큰 입자를 적용한 경우가 증가된 모멘텀에 의해 재순환 영역이 크게 나타났고, 유동 특성에 대한 속도비의 영향은 작은 입자를 적용한 경우에 비해 크지 않게 나타났다.