• Elastomers and Composites
• /
• v.55 no.1
• /
• pp.51-58
• /
• 2020

In this study, the thermal oxidation of raw natural rubber (NR) was investigated under controlled conditions by optical image and fourier transform infrared (FT-IR) analysis. The thermal oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at 80℃ under low humidity conditions to completely exclude moisture and restrict light oxidation. Images of the thin film of raw NR were obtained before and after thermal oxidation. FT-IR absorption spectra were measured in the transmission mode at different thermal exposure times. The thermal oxidation of NR was examined by the changes in the absorption peaks at 3449, 1736, 1447, 1377, 1242, 1072, and 833 cm^-1, which corresponded to a hydroxyl group (-OH), a carbonyl group (-C=O) from an aldehyde and a ketone, a methylene group (-CH₂-), a methyl group (-CH₃), a carbon-oxygen single bond (-C-O) from an epoxide, a carbon-oxygen bond (-C-O) from an ether, an alcohol, a peroxide, or a cyclic peroxide, and a cis-methine group (cis-CCH₃=CH-), respectively. In the initial stage of thermal oxidation, two different types of free radicals were produced quickly and randomly by the homolytic cleavage of a double bond and allylic hydrogen abstraction. Aldehydes and ketones were formed from chain scissions of the double bonds and alcohols were produced from allylic hydrogen abstraction at the methylene or methyl groups. Two reactions seemed to proceed competitively with each other. At a later stage, oxidative crosslinks seemed to dominate through the combination of free radicals such as an allyl radical (CH=CHCH₂·), alkoxy radical (RO·), and peroxy radical (ROO·) and the reaction of a hydroperoxide (-ROOH) with a double bond. The image obtained after thermal oxidation showed hardening without cracks. Based on these observations, a plausible two-step mechanism was suggested for chain hardening caused by the thermal oxidation.

• Journal of Bio-Environment Control
• /
• v.1 no.1
• /
• pp.37-51
• /
• 1992

Quantizing and extracting visual features of mushroom(Lentinus edodes L.) are crucial to the sorting and grading automation, the growth state measurement, and the dried performance indexing. A computer image processing system was utilized for the extraction and measurement of visual features of front and back sides of the mushroom. The image processing system is composed of the IBM PC compatible 386DK, ITEX PCVISION Plus frame grabber, B/W CCD camera, VGA color graphic monitor, and image output RGB monitor. In this paper, an automatic thresholding algorithm was developed to yield the segmented binary image representing skin states of the front and back sides. An eight directional Freeman's chain coding was modified to solve the edge disconnectivity by gradually expanding the mask size of 3$\times$3 to 9$\times$9. A real scaled geometric quantity of the object was directly extracted from the 8-directional chain element. The external shape of the mushroom was analyzed and converted to the quantitative feature patterns. Efficient algorithms for the extraction of the selected feature patterns and the recognition of the front and back side were developed. The developed algorithms were coded in a menu driven way using MS_C language Ver.6.0, PC VISION PLUS library fuctions, and VGA graphic functions.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.107-110
• /
• 2005

In this study we investigated the shear and forming behavior of chain stitched multi-axial warp knitted fabric preform, so called non-crimp fabric (NCF). The picture frame test was performed to characterize the shear behavior of NCF and also provide material properties for the numerical simulation of its deformation behavior. The forming behavior of NCF with chain stitch were investigated using hemispherical forming tools. The experimental results show that processing conditions such as blank holder force (BHF) and preform shape are crucial to determining the forming behavior of NCF. For instance, an asymmetric formed shape, which is due to the stitches introduced to NCF, turns into a symmetric one as BHF increases. Furthermore the in-plane and out-of buckling (wrinkle), the severance of which were quantified using image processing method, decreases significantly as BHF increases.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.265-269
• /
• 1987

In an industrial vision system, a coding technique for binary image is essential to extract useful informations. To reduce the processing time, a hardware implementation of the chain coding algorithm is attemped. For that purpose, the chain coding algorithm is modified so that it is more suitable for a hardware implementation. A hardwired chain coder is also developed and tested with developed vision system. The result shows that the processing time is greatly reduced and that the developed vision system is maybe feasible for real-time applications.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.233-238
• /
• 2004

Comer point is a very important information to a pattern recognition of image processing. And so, many researchers develope various detecting comer point algoritms. But, there are some problems to get comer points by 8 directional chain code when the degree of edge line is not integer multiplication of 45 degree. So, we propose a new algorithm which is combined with morphology and human visual conception for optimal comer points without the above defects. We get a good simulation result by this proposed algorithm Ana so, we think this algorithm is very useful to FA(factory automation} and ship's radar system to know some coastal area from its image.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.104-110
• /
• 2014

This paper considers two reconstruction schemes of structured-sparse signals, turbo inference and Markov chain Monte Carlo (MCMC) inference, in compressed sensing(CS) technique that is recently getting an important issue for an efficient video wireless transmission system using multi-copter as an unmanned aerial vehicle. Proposed reconstruction algorithms are setting importance on reduction of image data sizes, fast reconstruction speed and errorless reconstruction. As a result of experimentation with twenty kinds of images, we can find turbo reconstruction algorithm based on loopy belief propagation(BP) has more excellent performances than MCMC algorithm based on Gibbs sampling as aspects of average reconstruction computation time, normalized mean squared error(NMSE) values.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1852-1860
• /
• 2000

Distinct from the Markov random field or pseudo 2D HMM models for image analysis, this paper proposes a new model of 2D hidden Markov mesh chain(HMMM) model which subsumes the definitions of and the assumptions underlying the conventional HMM. The proposed model is a new theoretical realization of 2D HMM with the causality of top-down and left-right progression and the complete lattice constraint. These two conditions enable an efficient mesh decoding for model estimation and a recursive maximum likelihood estimation of model parameters. Those algorithms are developed in theoretical perspective and, in particular, the training algorithm, it is proved, attains the optimal set of parameters.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2515-2517
• /
• 2002

The process of character recognition goes through 5 steps; image acquisition, character region extraction, preprocessing, character region segmentation, character recognition. Therefore the final recognition rate of character recognition is directly affected by the performance of each step. This paper is a leading research for object recognition using image processing algorithm which is one of the field of study in computer vision. And this paper will suggest an algorithm to extract the portion of number chain, which is part of the research embodying a system to perceive the data of manufacture and the name of the producer on the wrapping of groceries. In addition, this can extract the number chain comparatively accurate without using many complex algorithm by diving and extracting the moving number region at the same time.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.216-219
• /
• 2007

본 논문에서는 영상 인식을 위해 그레이 레벨로 획득된 영상을 이진화할 때 발생되어 패턴의 윤곽선을 울퉁불퉁하게 만드는 랜덤 노이즈를 제거하기 위한 방법으로 체인 코드 트리밍(chain code trimming) 을 제안한다. 제안된 방법은 패턴의 외부 윤곽선과 내부 윤곽선의 체인 코드 분석을 통해 랜텀 노이즈의 체인 코드를 제거, 교정함으로서 이루어진다. 실험에서는 트리밍을 사용하기전과, 단순 트리밍을 한 경우, 체인 코드 트리밍을 한 경우를 서로 바로, 분석한다. 실험 결과는 패턴에 첨부되었던 랜덤 노이즈가 모두 성공리에 제거된 것을 보인다.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.