• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.356-363
• /
• 2015

Microbubbles moving in the turbulent boundary layer are visualized and investigated in the point of frictional drag reduction. The turbulent boundary layer is formed beneath the surface of the 2-D flat plate located in the tunnel test section. The microbubble generator produces mean bubble diameter of 30 – 50 μm. To capture the micro-bubbles passing through the tiny measurement area of 5.6 mm² to 200 mm², the shadowgraphy system is employed appropriately to illuminate bubbles. The velocity field of bubbles reveals that Reynolds stress is reduced in the boundary layer by microbubbles’ activity. To understand the contribution of microbubbles to the drag reduction rate more, much smaller field-of-view is required to visualize the bubble behaviors and to find the 2-D void fraction in the inner boundary layer.

• 천문학회보
• /
• 제37권2호
• /
• pp.99.1-99.1
• /
• 2012

We report the results of our analysis of far ultraviolet (FUV) observations made for the broad region around the ${\alpha}$ Vir (Spica) including the interaction zone of the Loop I and the Local Bubble. We employed the datasets of the GALEX and the FIMS, which made observations at similar FUV wavelengths. First, we noted that the GALEX image was enhanced in the southern region where the interaction zone exists. We attribute this enhanced FUV emission to dust scattering of the stellar photons, mostly from the background field stars with small contributions from the central star Spica. While the region is optically thin in general, the FUV intensity did not correlate well with the dust extinction level, indicating that the local radiation field has significant fluctuations. On the other hand, the GALEX FUV intensity well with the $H{\alpha}$ intensity as well as the dust extinction level in the northern part. In fact, the neutral hydrogen column density correlated very well with the dust extinction level throughout the whole region in consideration. The relationship between the neutral hydrogen column density and the color excess was estimated to be ${\sim}7{\times}10^{21}atoms\;cm^{-2}$, which is a little higher than the previous observations made for a diffuse interstellar medium. The spectral analyses of the FIMS observations showed the enhanced C IV emission throughout the whole region, indicating that the C IV emission arises by the interaction of the hot gases with the shell boundaries. A simple model showed that a large portion of the C IV emission comes from the Loop I side of the interaction zone, compared to the Local Bubble side. The FIMS spectrum also showed indications of the molecular hydrogen fluorescence lines for the interaction zone.

• 영어영문학
• /
• 제56권5호
• /
• pp.947-971
• /
• 2010

Anna Letitia Barbauld's poem "Washing-Day" (1797) has sparked a variety of feminist critical endeavors over the past two decades. While many feminist literary critics try to salvage the poem as a successful tongue-in-cheek riposte directed at the male dominant literary world, more rigorous Marxist feminists accuse Barbauld of being limited by her own middle-class woman's view on women's domestic labor. Legitimate as they may be, these readings fail to elucidate Barbauld's place in a larger literary and intellectual discourse during the eighteenth century. In this paper I read "Washing-Day" as a woman's georgic, a genre or mode concerned with agricultural labor, the public value of which was highly recognized in eighteenth-century England. Alluding to canonical texts by writers like Shakespeare, Milton, and Pope, Barbauld's "loaded lines" in mock-heroic form create a space in which the women's domestic labor of washing interrupts men's daily routines and disrupts their poetic assumptions. While she makes women's work visible, Barbauld also addresses its quintessential nature. Women's work is affective labor; women have to labor physically and mentally to produce the desired domestic comfort. By allowing the image of the soap "bubble" to echo with many "bubbles" in other writers' texts, from the soap bubbles the narrator used to play with as a child to the hot-air balloon "bubble" of the Montgolfier brothers, Barbauld pleasantly equates work and day-dreaming, men's toil and children's play, and finally public, scientific, and recognized labor and private, domestic, and imaginative activities.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3027-3032
• /
• 2007

To understand the complex phenomena performed in steam explosion, the fast and global measurement of the steam distribution is imperative for this extremely rapid transient stimulation of the bubble breakup and coalescence due to turbulent eddies and shock waves. TROI, the experimental facility requests more robust sensor system to meet this requirement. In Europe, researchers are prefer a X-ray method but this method is very expensive and has limited measurement range. There is an alternative technology such as ECT. Because of TROI's geometry, however, we need axial tomography method. This paper reviews image reconstruction algorethms for axial tomography, including Tikhonov regularization and iterative Tikhonov regularization. Axial tomography method is examined by simulation and experiment for typical permittivity distributions. Future works in axial tomography technology is discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.189-194
• /
• 2001

A simultaneous visualization of the behavior of bubbles and dry spots has been carried out for pool boiling of R-1l3 on a horizontal heater. From video imaging and image processing analysis, the formation of bubbles and dry spots occurs simultaneously, and therefore they should be considered as a synchronized concept rather than independent identities. The dry spot density is equivalent to the active site density in the region before CHF. At CHF point, large dry areas due to the coalescence of neighboring dry areas cover the heater surface.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.893-896
• /
• 2007

본 논문에서 제안하는 시스템은 Ladle 나탕의 상태를 카메라를 사용하여 Ladle 탕면을 관측하고 획득한 영상데이터를 주조정장치로 보내게 되는데, 이러한 영상데이터를 보내기 위해서는 유선 송수신 방식은 Ladle의 회전 특성상 사용하지 못하므로 무선 송수신 방식을 사용한다. 또한 초고온 환경이므로 고온에 견딜 수 있도록 Housing 기술을 이용한 Dual 영상카메라 장착 관측시스템을 구축하고, 탕면 거리, 버블 영상 등을 통해 그 크기를 산출하는 알고리듬을 제안한다. 제안한 알고리듬에 따라 20분의 연주시간에 대하여 19.25Cm의 지름을 가친 Bubble의 크기를 계산할 수 있었다.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.28-31
• /
• 2011

An attempt was made to compute the free surface deformation due to the impact of a water droplet. The Cauchy Poisson, i.e. the initial value problem, was solved with the kinematic and dynamic free surface boundary conditions linearized. The zero order Hankel transformation and Laplace transform were applied to the related equations. The initial condition for the free surface profile was derived from a captured video image. The effect of the surface tension was not significant with the water mass used in this investigation. The computed and observed free surface deformations were compared.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.511-511
• /
• 2017

하천에서 홍수 예방 및 가뭄재해 방지를 목적으로 최근 4대강 살리기 사업이 수행되었다. 특히, 안정적인 용수공급 및 다양한 수재해 피해를 최소화하기위해 다기능보가 설치되었다. 설치된 보는 고정보와 가동보로 구분되며 평상시에는 고정보를 넘어가는 월류흐름이 발생하며 홍수 시에는 추가적으로 가동보를 개방하여 오리피스 흐름이 발생한다. 최근 기후변화로 인해 집중호우가 빈번히 발생하며 이는 보 주변에서 빠르고 복잡한 흐름을 유발하게 된다. 이러한 흐름특성은 보하류의 세굴문제뿐만 아니라 물받이와 바닥보호공의 안전성에 영향을 미칠 수 있다. 본 연구에서는 영상기법을 활용하여 도수가 발생하는 조건에서 고정보 하류의 물받이공 및 바닥보호공에 난류흐름특성 및 압력분포를 분석하였다. 길이 8.0 m, 폭 0.3 m를 갖는 개수로에서 실험을 수행하였으며 0.2 m 높이의 고정보는 상류경계로부터 3.0 m지점에 위치하였다. 보 하류부에서 유속성분은 비접촉식 유속측정 기법인 입자영상유속계(Particle Image velocimetry, PIV)와 기포흐름을 측정할 수 있는 기포영상유속계(Bubble Image velocimetry, BIV)를 적용하였다. 그러므로 기포 존재유무와 관계없이 보 하류부 구간에 대한 유속장 성분을 취득하였다. 도수흐름은 물받이공 및 바닥보호공 영역의 바닥면을 따라 빠른 유속을 갖는 제트류가 발생하고 수면과 바닥으로 강한 진동이 발생하여 불안정한 흐름이 야기된다. 바닥면에 작용하는 압력을 측정하기 위해 흐름방향을 따라 피에조미터를 설치하였고 압력수두 분포를 초고속카메라로 촬영하여 그 특성을 분석하였다. 실험을 결과를 통해 보 하류부에 영향을 미치는 인자를 도출하였으며 향후 보 설계기준에 반영할 수 있을 것으로 기대된다.

• 펄프종이기술
• /
• 제41권2호
• /
• pp.26-33
• /
• 2009

A new testing method to evaluate the deposition potential of white pitch was developed. The new method involves depositing the potential white pitch particles on the air bubble covered plastic film in the pitch deposit tester (PDT) developed by KRICT and analysing the deposited area of white pitch using an image analyzer. In addition, the effect of two important factors (pH and calcium hardness) on white pitch deposition potential was elucidated. When pH of the coated broke stock was increased from neutral to alkali or the calcium hardness of the stock was decreased, the pitch deposit area was decreased, implying that these two factors have to be controlled during the evaluation of pitch deposition potential. It was found that hydrophobicity of the surface of latex binding films repulped is a key factor influencing white pitch deposition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.922-930
• /
• 2004

An experimental investigation was performed to study on the generation of air bubble and air core with swirling flow in a horizontal cicular tube. To determine some characteristics of the flow, 2D PIV technique is employed for velocity measurement in water. The experimental rig is manufactured from an acryl tube. The test tube diameter of 80mm, and a length of 3000mm. The used algorithm is the gray leve cross-correlation method(Kimura et al. 1986). An Ar-ion laser is used and the light from the laser(500mW) passes through a probe to make two-dimensional light sheet. In order to make coded images of the tracer particles on one frame, an AOM(Acoustic-Optical Modulator) is used. The maximum axial velocities showed near the test tube wall at y/D =0.1 and y/D =0.9 along the test tube. The higher Reynolds number increase, the lower axial velocities are showed in the center of the test tube. The air bubbles are generated from Re =10,000 and developed into air core from the recirculating water pump rpm equal 30Hz. The pressure and temperature are measured across the test tube at X/D=3.33.