• 한국실내디자인학회논문집
• /
• 제15권1호
• /
• pp.71-78
• /
• 2006

This study aims to understand the meaning of 'wall' and spatial image transformation by the wall. To find the meaning of wall, some classical works and modern works - Le Corbusier's Domino system and Schroder House-are analyzed into functional aspect of wall, in result we know that wall has of evolved throughout history to become an Increasingly active component of our built environment. Whereas the wall permits variations in the human and natural environment, the wall could be changed a lot of different shapes. The results of this study are as follows; (1) Applying new attempt to the wall makes interactivity in spatial elements. (2) Through rotation of the wall, we find the periodicity of wall length with sine curve. (3) Wall made by points and linear elements can change the spatial image, because of there geometrical characteristics.

• 치과방사선
• /
• 제21권2호
• /
• pp.157-163
• /
• 1991

The author has evaluated the panoramic image of the maxillary sinus according to the skull position. The lead foils were attached to the five walls of the maxillary sinus and the inferior turbinate individually. The skull was located in three positions; standard position, 20㎜ forward position and chin-down position. The obtained results were as follows: 1. In standard position, the medial wall was superimposed upon most of the panoramic antral image. The anterior wall and the posterolateral wall were superimposed upon the medial half and the lateral third respectively. 2. In forward position, the width of the panoramic antral image was diminished generally. The anterior wall was superimposed upon most of the panoramic antral image and the posterolateral wall appeared narrowly at the most lateral portion of the panoramic antral image. 3. In chin-down position, there was no significant difference in comparison to the standard position. 4. Inferior turbinate was not superimposed upon the panoramic antral image.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1452-1457
• /
• 2004

In this paper, a method of measuring the length of defects on the wall and restructuring the defect image is proposed based on the estimation algorithm of a camera orientation which uses the declination angle of a laser slit beam. The estimation algorithm of the horizontally inclined angle of CCD camera adopts a 3-dimensional coordinate transformation of the image plane where both the laser beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect can be reconstructed to an image normal to the wall. From the result of a series of experiments, the measuring accuracy of the defect is measured within 0.5% error bound of real defect size under 30 degree of the horizontally inclined angle. The proposed algorithm provides the method of reconstructing the image taken at any arbitrary horizontally inclined angle to the image normal to the wall and thus, it enables the accurate measurement of the defect lengths only by using a single camera and a laser slit beam.

• 제어로봇시스템학회논문지
• /
• 제8권1호
• /
• pp.37-45
• /
• 2002

A method of measuring the length of defects on the wall and restructuring the defect image is proposed based on the estimation algorithm of a camera orientation, which uses the declination angle of a laser slit beam. The estimation algorithm of the horizontally inclined angle of CCD camera adopts a 3-dimensional coordinate transformation of the image plane where both the laser beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect can be reconstructed as an image normal to the wall. From the result of a series of experiments, the measuring accuracy of the defect is measured within 0.5% error bound of real defect size under 30 degree of the horizontally inclined angle. The proposed algorithm provides the method of reconstructing the image taken at any arbitrary horizontally inclined angle as the image normal as the wall and thus, it enables the accurate measurement of the defect lengths by using a single camera and a laser slit beam.

• 한국실내디자인학회논문집
• /
• 제33호
• /
• pp.19-26
• /
• 2002

This study analyzed the characteristics of spatial expression in the Barcelona Pavilion to be based on tectonics. Mies pointed out the image of materiality about the material rather than the process of tectonics using the material, and he also expressed demateriality in the image of each material through the reflection. To be liberated from structural matters, the wall has been introduced. He intended to show the design plan as the independent structural system, however, the wall actually seems to be supporting the roof that shows rather clearly self-contradictory because of the expression of materiality in the material. In terms of architectural elements; wall, roof, column, floor, and so forth, tectonic expression and abstract aesthetics stands face to face, because of hiding the productional process and transforming to line and surface in the image of materiality. The interior of the glass wall seems fairly closed space from the exterior, because materiality and reflection of materials of columns and podium. The character of experiential space is inconsistent and fragmentary because of the splendid images from maternality and reflection on the wall, and collision with the reality and the image the wall reflects, even though the geometrical space of the Pavilion's plan has the mutual penetrability and organic character.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.746-751
• /
• 2003

A method of measuring the length of defects on the wall of the spent nuclear fuel pool using the image processing and a laser slit beam is proposed. Since the defect monitoring camera is suspended by a crane and hinged to the crane hook, the camera viewing direction can not be adjusted to the orientation that is exactly perpendicular to the wall. Thus, the image taken by the camera, which is horizontally rotated along the axis of the camera supporting beam, is distorted and thus, the precise length can not be measured. In this paper, by using the LASER slit beam generator, the horizontally rotated angle of the camera is estimated. Once the angle is obtained, the distorted image can be easily reconstructed to the image normal to the wall. The estimation algorithm adopts a 3-dimensional coordinate transformation of the image plane where both the laser slit beam and the original image of the defects exist. The estimation equation is obtained by using the information of the beam projected on the wall and the parameters of this equation are experimentally obtained. With this algorithm, the original image of the defect taken at arbitrary rotated angle can be reconstructed to an image normal to the wall. From the result of a series of experiments, the accuracy of the defect is measured within 0.6 and 1.3 % error bound of real defect size in the air and underwater, respectively under 30 degree of the inclined angle of the laser slit beam generator. Also, the error increases as the inclined angle increases upto 60 degree. Over this angle, the defect length can not be measured since the defect image disappears. The proposed algorithm enables the accurate measurement of the defect length only by using a single camera and a laser slit beam.

• 한국콘텐츠학회논문지
• /
• 제14권11호
• /
• pp.60-67
• /
• 2014

예술의 역사에 있어 문자와 형상이 어우러지는 형태는 고대 예술의 여러 장르에서 발견된다. 특히 불교예술의 도상은 문자와 동등한 의미전달 수단으로서 교리를 선전하는 중요한 도구였다. 이는 원래의 문학적 형식이 회화적 형식으로 소통체계가 전환됨을 말하며, 사유방식도 다른 기호적 체계를 가진다. 문자와 형상의 상호 전환은 현대 영상매체의 미적개념을 해석하는데 매우 중요하다. 그러므로, 본 논문은 형상적 사유를 통한 현대 대중매체의 시각예술에 대한 해석의 실마리를 고대 돈황벽화 <구생록본생도>에 나타난 도상적 서사와 애니메이션 <구색록>의 영상이미지 표현과의 비교분석을 통해 살펴보았다.

• 대한핵의학회지
• /
• 제24권2호
• /
• pp.244-253
• /
• 1990

Sixty-four patients with paradoxical ventricular wall motion noticed both in angiocardiography or 2-dimensional echocardiography were assessed by ECG gated blood pool scan (GBPS). Endless cine loop image, phase and amplitude images and paradox image obtained by visual inspection of each cardiac beat or Fourier transformation of acquired raw data were investigated to determine the incremental value of GBPS with these processing methods for identification of paradoxical ventricular wall motion. The results were as follows: 1) Paradoxical wall motions were observed on interventricular septum in 34 cases, left ventricular free wall in 26 and right ventricular wall in 24. Underlying heart diseases were ischemic (23 cases) valvular(9), congenital heart disease (12), cardiomyopathy (5). pericardial effusion(5), post cardiac surgery(3), col pulmonale (2), endocarditis(1) and right ventricular tumor(1). 2) Left ventricular ejection fractions of patients with paradoxical left ventricular wall motion were significantly lower than those with paradoxical septal motion(p<0.005). 3) The sensitivity of each processing methods for detecting paradoxical wall motion was 76.9% by phase analysis, 74.6% by endless cine loop mapping and 68.4% by paradox image manipultion respectively. Paradoxial motions visualized only in phase, paradox or both images were appeared as hypokinesia or akinesia in cine loop image. 4) All events could be identified by at least one of above three processing methods, however only 34 cases (48.4%) showed the paradoxical molies in all of the three images. By these findings, we concluded that simultaneous inspection of all above three processing methods-endless cine loop, phase analysis and paradox image-is necessary for accurate identification and assessment of paradoxical ventricular wall motion when performing GBPS.

• Journal of Mechanical Science and Technology
• /
• 제15권8호
• /
• pp.1097-1107
• /
• 2001

In this paper, the wall following navigation algorithm of the mobile robot using a mono vision system is described. The key points of the mobile robot navigation system are effective acquisition of the environmental information and fast recognition of the robot position. Also, from this information, the mobile robot should be appropriately controlled to follow a desired path. For the recognition of the relative position and orientation of the robot to the wall, the features of the corridor structure are extracted using the mono vision system, then the relative position, the offset distance and steering angle of the robot from the wall, is derived for a simple corridor geometry. For the alleviation of the computation burden of the image processing, the Kalman filter is used to reduce search region in the image space for line detection. Next, the robot is controlled by this information to follow the desired path. The wall following control scheme by the PD control scheme is composed of two control parts, the approaching control and the orientation control, and each control is performed by steering and forward-driving motion of the robot. To verify the effectiveness of the proposed algorithm, the real time navigation experiments are performed. Through the result of the experiments, the effectiveness and flexibility of the suggested algorithm are verified in comparison with a pure encoder-guided mobile robot navigation system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.427-429
• /
• 2005

This paper presents the use of Point Number Algorithm (PNA) for real-time image processing for position identification of mobile robot. PNA can get how many points in the image gotten from the robot vision and can calculate the distance between the robot and the wall by the number of the points. The algorithm can be applied to a robot vision system enable to identify where it is in the workspace. In the workspace, the walls are made up by white background with many black points on them evenly. The angle of the vision is set invariable. So the more black points in the vision, the longer the distance is from the robot to the wall. But when the robot does not face the wall directly, the number of the black points is different. When the robot faces the wall, the least number of the black points can be gotten. The simulation results are presented at the end of this paper.