• 제목/요약/키워드: Image Uniformity

검색결과 260건 처리시간 0.026초

디스크형 3차원 홀로그래피 메모리에서 비초점 Fourier 면 홀로그램의 저장 효과 (Effects of storing defocused Fourier plane holograms in three-dimensional holographic disk memories)

  • 장주석;신동학
    • 한국광학회지
    • /
    • 제12권1호
    • /
    • pp.61-66
    • /
    • 2001
  • 두께가 얇은 기록매질을 사용하는 디스크형 홀로그래픽 메모리에서 비초점 Fourier aus 홀로그램을 저장할 때 홀로그램 당면적 저장밀도 및 기록 면에서의 빔세기분포 등을 조사하였다. 정확한 Fourier 면 홀로그램을 기록할때에는 2진 데이터를 표현하는 공간 광 변조기의 화소 피치가 클수록 면적 저장 밀도가 증가하지만, 비초점 Fourier 면 홀로그램을 저장할 때에는 면적 저장밀도를 최대로 하는 최적의 화소 피치가 존재함을 보였다. 일반적으로 홀로그램당 면적 저장밀도를 높이기 위해서는 데이터 영상을 집속하는 Fourier 변환 렌즈의 f/#가 가급적 작아야 한다. 이 경우 기록면에서의 빔세기 분포뿐만 아니라 기록면적이 비초점율에 따라 매우 민감하게 변하게 된다. 따라서 정확한 Fourier 면 홀로그램을 기록한다. 할지라도 최대의 면적 저장밀도를 얻기 위해서는 매질의 두께에 따른 비초점율의 영향을 고려해야 한다.

  • PDF

초미립자탄산칼슘이 잉크제트 인쇄품질에 미치는 영향 (The Effect of Precipitated Calcium Carbonate Having a Small Particle Size on the Print Quality of an Inkjet-Grade Paper)

  • 이용규;이희명
    • 펄프종이기술
    • /
    • 제37권2호
    • /
    • pp.38-46
    • /
    • 2005
  • Experimental work was carried out in order to produce a novel grade of ink-jet paper that has both high print-out quality and price competitiveness. Usually, silica and PVOH has been used for ink-jet paper to design the coating layer that has a hydrophilic and micro-porous structure. However, poor rheological characteristics and low productivity of the silica-PVOH system make the price of the ink-jet paper high. The main focus of this study was replacing the conventional silica (coating pigment) PVOH (binder) coating system with the new PCC (coating pigment) cationic starch (binder) coating system, and optimizing thecoating technology associated with PPC-cationic starch system. In this study, ink-jet print quality of PCC-coated papers was compared with that of silica-coated paper. Two types of PCC were used: conventional type and colloid type. It turned out that PCC C, a conventional coating pigment, has not given a desirable result: it showed high dot reproduction, but it gave low optical density. In spite of low dot reproduction, the qualities of PCC A were comparable or superior to those of silica in optical density, color reproduction, and the uniformity of printing surface. It was also shown that the problems that are happened when the dosage level of cationic starch was too low were varied with ink-type used in each printer. However, in the case of low binder level, the produced image was widely spread resulting fromtoo low optical density of images, or from the lack of bonding ability to set ink into coating surface.

디지털 데이터의 홀로그래피 저장에서 뒤틀린 니매틱 액정 디스플레이로 세기 및 위상 변조에 기초한 2진 데이터의 광학적 표현 (Optical representation of binary data based on both intensity and phase modulation with a twisted-nematic liquid crystal display for holographic digital data storage)

  • 신동학;오용석;장주석
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 춘계종합학술대회
    • /
    • pp.497-502
    • /
    • 2001
  • 디스크형 기록매질을 사용하는 홀로그래픽 메모리에서 뒤틀린 니매틱 액정 디스플레이를 사용하여 세기와 위상을 동시에 변조하는 방법을 제안한다. 세기변조에 대해서 액정 디스플레이 픽셀의 밝고 어두운 상태에 따라 2진의 off (0) 과 on (1)을 표현하기 때문에 기존의 방식과 다를 짓이 없다. 그러나 우리의 방식에서는 on의 상태에서 서로 다른 2가지의 위상지연을 만들 수 있다. 이 2 가지의 위상지연이 180도에 가까울 경우, Fourier 면 홀로그램을 기록할 때 데이터 영상의 dc 성분을 감소시켜 기록면에서의 빔 세기 분포를 향상시킬 수 있다. 제안한 방식에 대한 유용성을 실험으로 데모하였다.

  • PDF

뇌경색 감별진단을 위한 컴퓨터보조진단 응용: Brain CT Images 적용 (Computer Aided Diagnosis Applications for the Differential Diagnosis of Infarction: Apply on Brain CT Image)

  • 박형후;조문주;임인철;이진수
    • 한국방사선학회논문지
    • /
    • 제10권8호
    • /
    • pp.645-652
    • /
    • 2016
  • 본 연구는 통계적 속성에 기반한 질감특징값 분석을 바탕으로 뇌 전산화단층촬영 영상에서 정상과 뇌경색의 컴퓨터보조진단의 적용 가능성을 알아보고자 하였다. 실험은 질감특징값을 나타내는 6개의 파라미터를 이용한 질환인식률 평가와 ROC curve를 분석하였다. 그 결과 평균밝기 88%, 대조도 92%, 평탄도 94%, 균일도 88%, 엔트로피 84%의 높은 질환인식률을 나타내었다. 하지만 왜곡도의 경우 58%로 다소 낮은 질환 인식률을 나타내었다. ROC curve를 이용한 분석에서 각 파라미터의 곡선아래면적이 0.886(p=0.0001)이상을 나타내어 질환인식에 의미가 있는 결과로 나타났다. 또한 각 파라미터의 cut-off값 결정으로 컴퓨터보조진단을 통한 질환예측이 가능할 것으로 판단된다.

패키지 기판 디스미어 공정의 대기압 플라즈마 처리 특성 (Process Characteristics of Atmospheric Pressure Plasma for Package Substrate Desmear Process)

  • 유선중
    • 한국진공학회지
    • /
    • 제18권5호
    • /
    • pp.337-345
    • /
    • 2009
  • 패키지 기판의 지름 $100{\mu}m$ 이하 미세 드릴 구멍의 경우 습식 디스미어 공정만으로는 구멍 내부의 스미어를 효과적으로 제거할 수 없다. 본 연구에서는 습식 디스미어 공정의 이전 단계에서 대기압 플라즈마를 처리하여 소수성의 기판 표면을 친수성으로 개질하고자 하였다. 대기압 플라즈마 공정은 리모트 DBD 방식의 전극을 이용하여 패키지 제조 공정에 적합한 인라인 형태의 장비로 구성되었다. 대기압 플라즈마를 처리한 결과 접촉각 기준으로 $71^{\circ}$의 소수성 절연 필름 표면이 $30^{\circ}$ 정도의 친수성 표면으로 개질되었다. 대기압 플라즈마 처리 유무에 따른 습식 디스미어 공정의 특성을 평가하기 위하여 절연 필름의 두께, 드릴 구멍 지름, 표면 조도의 변화를 측정하였는데, 대기압 플라즈마 처리 시 기판 전면에서 공정 특성의 균일도가 향상되는 것을 확인하였다. 또한 대기압 플라즈마 처리 유무에 따른 드릴 구멍의 SEM 사진 분석 결과 대기압 플라즈마 처리 시 구멍 내부의 스미어가 효과적으로 제거됨을 실험적으로 확인하였다.

Mg와 ZnO 함량변화에 따른 MAZO, MIZO 박막의 특성비교 (Characteristic Comparison of MAZO and MIZO Thin Films with Mg and ZnO Variation)

  • 장준성;김인영;정채환;문종하;김진혁
    • Current Photovoltaic Research
    • /
    • 제3권3호
    • /
    • pp.101-105
    • /
    • 2015
  • ZnO is gathering great interest for large square optoelectrical devices of flat panel display (FHD) and solar cell as a transparent conductive oxide (TCO). Herewith, Mg and IIIA (Al, In) co-doped ZnO films were prepared on SLG substrate using RF magnetron sputtering system. The effect of variation of atomic weight % of Mg and ZnO have been investigated. The atomic weight % Al and In are of 3% and kept constant throughout. The numbers of samples were prepared according to their different contents, which are $M_{3%}AZO_{94%}$, $M_{4%}AZO_{93%}-(MAZO)$ and $M_{3%}IZO_{94%}$, $M_{4%}IZO_{93%}-(MIZO)$ respectively. A RF power of 225 W and working pressure of 6 m Torr was used for the deposition at $300^{\circ}C$. All of the two thin film show good uniformity in field emission scanning electron microscopy image. $M_{3%}AZO_{94%}$ thin film shows overall better performance among the all. The film shows the best lowest resistivity, carrier concentration, mobility and Sheet resistance and is found to be are of $8.16{\times}10^{-4}{\Omega}cm$, $4.372{\times}10^{20}/cm^3$, $17.5cm^2/vs$ and $8.9{\Omega}/sq$ respectively. Also $M_{3%}AZO_{94%}$ thin film shows the relatively high optical band gap energy of 3.7 eV with high transmittance more than 80% in visible region required for the better solar cell performance.

Multi-Functional Furniture Design in Small Living Space

  • Kim, Hyun-Jeong;Choi, Kyung-Ran;Sung, Yun-Jung
    • 한국가구학회지
    • /
    • 제22권3호
    • /
    • pp.190-198
    • /
    • 2011
  • This study intended to present a new direction of differentiated and innovative furniture design for small living space overcoming the uniformity of conventional small living. In order to achieve these goals, a new piece of furniture with multi functions useful for such small space has been designed and explained in this study. This new type multi-functional furniture can be utilized as kitchen, dining table, home bar or office stand depending on the user's necessity. In particular, it provides more adaptability to changing life and spatial availabilities for small living space in terms of space division, separation and fusion features. Based on the needs of small living space brought by social changes, the conventional concept of small living space, which divides space by partitions or walls, should be changed into flexible perception of space. Also, this research proposed the features of furniture design for functional shifts in terms of its functional, structural, and systematical aspects. In this respect, space can be regarded as a variable place and the image of space can be differently appreciated by means of shift, functional transition and mobility. That is, small living space can be perceived as kitchen, living space or working space at the same time. In conclusion, the versatile use of limited space can be a solution to the issues related to small living space; the convertible and movable furniture called F4 Island presented in this study can transform such spatially limited space into a space with multiple functions to meet the requirements of its residents.

  • PDF

Phenol Free Heat-Set 윤전 잉크의 인쇄적성에 관한 연구 (제3보) - 잉크 유화가 인쇄품질에 미치는 영향 - (The Study of the Printability on the Phenol Free Heat-Set Web Inks(III) - Effects of the Emulsification of Ink on Print Quality -)

  • 하영백;오성상;이원재
    • 펄프종이기술
    • /
    • 제44권4호
    • /
    • pp.77-84
    • /
    • 2012
  • The lithographic process depends on a satisfactory ink-in-water emulsion being formed during printing and the speed of wet presses makes the choice of fountain solution vitally important as the ink and fount must react quickly to form a stable emulsion. Ink and water come into contact with each other on the rolls of the press and are forced together in the roll nips. The water is not soluble in the ink since it is slightly fat. Instead, an emulsion is formed, a heterogeneous mass consisting of small water drops mixed into the ink, if the water feed is too great. This emulsification can affect the properties of an off-set ink and negatively affect the printability. So we investigated the effects of the emulsification of phenol free heat-set ink and existing heat-set ink on printed quality, such as amount of ink transfer, printed density, print-through and uniformity. We used Duke emulsification tester for the emulsification of inks, and used IGT printability tester for printed quality. The printed quality were measured by densitometer and were evaluated by the image analysis system. Compared to conventional printing ink, phenol-free ink showed better results of the printability at the emulsification.

다중 배열 니들 코팅을 이용한 LED 스크린용 Anti-Moiré 필터 제작 (Fabrication of Anti-Moiré Filter Using Multi-Array Needle Coating for LED Screens)

  • 전경준;이진영;박종운
    • 반도체디스플레이기술학회지
    • /
    • 제20권1호
    • /
    • pp.77-82
    • /
    • 2021
  • Using a multi-array needle module developed for coating of high-density cylindrical microlens array (C-MLA), we have fabricated an anti-Moiré filter for LED screens. The Moiré phenomenon appears due to the interference between the array pattern of image sensors in a camera and the non-emission area (grid pattern) of a LED screen. To suppress it, we have employed poly(methyl methacrylate) (PMMA) and coated it on a glass substrate in the form of a grid and non-grid (parallel lines). We have rotated the needle module in order to increase the number of C-MLAs. With this scheme, we have fabricated the 150 mm × 150 mm anti-Moiré filters where 836 microlens lines are formed. They show the average width of 255.4 ㎛, the average distance between CMLs of 94.6 ㎛, and C-MLA width non-uniformity of 4.7%. We have shown that the Moiré patterns still appear in the presence of the parallel (non-grid)-type filter, whereas they disappeared completely by the grid-type filter. It is due to the fact that the Moiré patterns are diffused more effectively by the grid-type C-MLA.

가상 골격-치열 하이브리드 이미지 생성을 위한 구강 스캐너의 활용 (Intraoral Scan for Virtual Skull-Dentition Hybrid Images of Young Patients)

  • 이주희;양병은;이혜림
    • 대한소아치과학회지
    • /
    • 제49권1호
    • /
    • pp.57-64
    • /
    • 2022
  • 콘빔 전산화 단층촬영(CBCT)은 치열을 왜곡시켜 추가 치열 이미지가 필요하다. 치열 이미지로 주로 사용되는 석고 모형을 대신해 구강 스캐너로 CBCT의 치열 이미지를 보완할 때의 임상적 활용 가능성을 평가하였다. 만 12 - 18세의 20명에게 상악에 대한 석고 모형, 구강 스캔 이미지, CBCT이미지를 획득하였다. 비교를 위해 두 종류의 구강 스캐너를 이용하였는데, 그 중 하나의 구강 스캐너로는 전악을 3분할하여 각각을 스캔한 후 이들을 병합해 전악 이미지를 획득하는 방법을 추가로 시행하였다. 구강 스캐너를 이용해 얻은 가상 골격-치열 하이브리드 이미지를 석고 모형을 통해 얻은 이미지와 중첩하여 각 기준점에서의 좌표 값의 차이와 거리를 측정하였다. 결과적으로 구강 스캐너로 분할하여 스캔하는 방법을 시행했을 때 평균 거리 2 ㎛를 보여 가장 적게 나타났다. 구강 스캐너를 적절히 이용하면 가상 골격-치열 하이브리드 이미지를 위한 치열 이미지로 훌륭히 활용될 수 있을 것이다.