• Investigative Magnetic Resonance Imaging
• /
• v.2 no.1
• /
• pp.96-103
• /
• 1998

Purpose : To assess the clinical utility of turbo contrast-enhanced magnetic resonance angiography(CE MRA) in the evaluation of the aortic arch and its major branches and to compare the image quality of CE MRA among different coils used. Materials and Methods : Turbo three-phase dynamic CE MRA encompassing aortic arch and its major branches was prospectively performed after manual bolus IV injection of contrast material in 29 patients with suspected cerebrovascular diseases at 1.0T MR unit. the raw data were obtained with 3-D FISH sequence (TR 5.4ms, TE 2.3ms, flip angle 30, slab thickness 80nm, effective slice thickness 4.0mm, matrix size $100{\times}256$, FOV 280mm). Total data acquisition time was 4. to 60 seconds. We subjectively evaluated the imge quality with three-rating scheme : "good" for unequivocal normal finding, "fair" for relatively satisfactory quality to diagnose 'normal' despite intravascular low signal, and "poor" for equivocal diagnosis or non-visualization of the origin or segment of the vessels due to low signal or artifacts which needs catheter angiography. At the level of the carotid bifurcation, it was compared with conventional 2D-TOF MRA image. Overall image quality was also compared visually and quantitatively by measuring signal-to-noise ratios (SNRs) of the ascending aorta, the innominate artery and both common carotid arteries among the three different coils used(CP body array(n=12), CP neck array(n=9), and head-and-neck(n=8). Results : Demonstration of the aortic arch and its major branches was rated as "good" in 55% (16/29) and "fair" in 34%(10/29). At the level of the carotid bifurcation, image quality of turbo CE MRA was same as or better than conventional 2D-TOF MRA in 65% (17/26). Overall image quality and SNR were significantlygreater with CP body array coil than with CP neck array or head-and-neck coil. Conclusions : Turbo CE MRA can be used as a screening exam in the evaluation of the major branches of the aortic arch from their origin to the skull base. Overall imagequality appears to be better with CP body array coil than with CP neck array coil or head-and-neck coil.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.527-534
• /
• 2019

Most of the prints left on the crime scene are latent prints. And, even after the latent prints have been developed, additional enhancement is required and forensic light sources are mainly used. Depending on the applied technique and the light source used, it is difficult to obtain the ideal enhancement effect when the reflected light cannot be cut off well. In this study, we improved the wavelength of the forensic light source by attaching a low-pass filter, resulting in better quality fingerprint images.

• The Journal of the Korea Contents Association
• /
• v.3 no.3
• /
• pp.11-18
• /
• 2003

Error diffusion is a procedure for generating high quality bilevel images from continuous-tone images but blurs the edge information. To solve this problem, we propose the improved method appling edge enhanced weights based on local characteristic of the original images. We consider edge information as local characteristic. First, we produce edges by appling 3$\times$3 sobel operator to the original image. The edge is normalized from 0 to 1. Edge information weights are computed by using sinusoidal function and the normalized edge information. The edge enhanced weights are computed by using edge information weights multiplied input pixels. The proposed method is compared with conventional methods by measuring the edge correlation and quality of the recovered images from the halftoned images. The proposed method provides better quality than the conventional method due to the enhanced edge and represents efficiently the detail edge. Also, the proposed method is improved in edge representation than the conventional method.

• The KIPS Transactions:PartB
• /
• v.18B no.1
• /
• pp.1-10
• /
• 2011

Reversible watermarking inserts watermark into digital media in such a way that visual transparency is preserved, which enables the restoration of the original media from the watermarked one without any loss of media quality. It has various applications, where high capacity and high visual quality are major requirements. This paper presents a new effective multi-round embedding scheme for the differential histogram-based reversible watermarking that satisfies high capacity requirements of the application. The proposed technique exploits the row-column cross scanning to fully utilize the locality of images when multi-round embedding phase to the message inserted image. Through experiments using multiple kinds of test images, we prove that the presented algorithm provides 100% reversibility, effectiveness of multi-round embedding, and higher visual quality, while maintaining the induced-distortion low.

• Korean Journal of Radiology
• /
• v.2 no.1
• /
• pp.28-36
• /
• 2001

Objective: To provide a systematic overview of the effects of various parameters on contrast enhancement within the same population, an animal experiment as well as a computer-aided simulation study was performed. Materials and Methods: In an animal experiment, single-level dynamic CT through the liver was performed at 5-second intervals just after the injection of contrast medium for 3 minutes. Combinations of three different amounts (1, 2, 3 mL/kg), concentrations (150, 200, 300 mgI/mL), and injection rates (0.5, 1, 2 mL/sec) were used. The CT number of the aorta (A), portal vein (P) and liver (L) was measured in each image, and time-attenuation curves for A, P and L were thus obtained. The degree of maximum enhancement (Imax) and time to reach peak enhancement (Tmax) of A, P and L were determined, and times to equilibrium (Teq) were analyzed. In the computed-aided simulation model, a program based on the amount, flow, and diffusion coefficient of body fluid in various compartments of the human body was designed. The input variables were the concentrations, volumes and injection rates of the contrast media used. The program generated the time-attenuation curves of A, P and L, as well as liver-to-hepatocellular carcinoma (HCC) contrast curves. On each curve, we calculated and plotted the optimal temporal window (time period above the lower threshold, which in this experiment was 10 Hounsfield units), the total area under the curve above the lower threshold, and the area within the optimal range. Results: A. Animal Experiment: At a given concentration and injection rate, an increased volume of contrast medium led to increases in Imax A, P and L. In addition, Tmax A, P, L and Teq were prolonged in parallel with increases in injection time The time-attenuation curve shifted upward and to the right. For a given volume and injection rate, an increased concentration of contrast medium increased the degree of aortic, portal and hepatic enhancement, though Tmax A, P and L remained the same. The time-attenuation curve shifted upward. For a given volume and concentration of contrast medium, changes in the injection rate had a prominent effect on aortic enhancement, and that of the portal vein and hepatic parenchyma also showed some increase, though the effect was less prominent. A increased in the rate of contrast injection led to shifting of the time enhancement curve to the left and upward. B. Computer Simulation: At a faster injection rate, there was minimal change in the degree of hepatic attenuation, though the duration of the optimal temporal window decreased. The area between 10 and 30 HU was greatest when contrast media was delivered at a rate of 2 3 mL/sec. Although the total area under the curve increased in proportion to the injection rate, most of this increase was above the upper threshould and thus the temporal window was narrow and the optimal area decreased. Conclusion: Increases in volume, concentration and injection rate all resulted in improved arterial enhancement. If cost was disregarded, increasing the injection volume was the most reliable way of obtaining good quality enhancement. The optimal way of delivering a given amount of contrast medium can be calculated using a computer-based mathematical model.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.327-333
• /
• 2008

In general, a lens with large NA makes image quality better. There are many kinds of cheap concave mirrors with large aperture and NA. This paper presents a method that uses a large aperture projection imaging system to enhance the image used for 3D shape measurement. This method makes it possible to enhance reflection uniformity on the object surface and increases SNR (Signal to Noise Ratio). Using a large aperture lens, it is possible to obtain a brighter image, reducing the shading nature in the image boundary, and enhancing the reflection uniformity even on woven surfaces. Because of the exorbitant cost of a large aperture projection lens larger than 150 mm in diameter, a refractive lens was exchanged with a concave mirror resulting in the same optical effect. In experiment, changing NA $0.15{\sim}0.8$, image contrast was enhanced from 46 to 1.33. Incidentally, the effect of the concave mirror was tested successfully through the experiment.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.19-27
• /
• 2018

A change in object distance would generally change the magnification of an optical system. In this paper, we have proposed and designed a double-Gauss optical system with a fixed magnification and image surface regardless of any change in object distance, according to moving the lens groups a little bit to the front and rear of the stop, independently parallel to the direction of the optical axis. By maintaining a constant size of image formation in spite of various object-distance changes in a projection system such as a head-up display (HUD) or head-mounted display (HMD), we can prevent the field of view from changing while focusing in an HUD or HMD. Also, to check precisely the state of the wiring that connects semiconductor chips and IC circuit boards, we can keep the magnification of the optical system constant, even when the object distance changes due to vertical movement along the optical axis of a testing device. Additionally, if we use this double-Gauss optical system as a vision system in the testing process of lots of electronic boards in a manufacturing system, since we can systematically eliminate additional image processing for visual enhancement of image quality, we can dramatically reduce the testing time for a fast test process. Also, the Gaussian bracket method was used to find the moving distance of each group, to achieve the desired specifications and fix magnification and image surface simultaneously. After the initial design, the optimization of the optical system was performed using the Synopsys optical design software.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.140-145
• /
• 2009

Recently, lots of research activities have been carried out to provide advanced smart control functions applying a computer networking technology to telemeter/telecontrol systems. In this paper, we suggest client/server architecture with specially designed remote and local control software for applicant those to greenhouse model. The server system collects and integrates various datas related sensor or actuator, and stores in database maintaining high quality of remote I/O control operation. Where as the client system simply operation such as control panel on the internet web browser. Implemented system well communicate interactively both monitoring and control status of greenhouse including multimedia informations. In this study we also analyze the extent of the performance enhancement in terms of overall throughput and data transfer time effected by packet size.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.3
• /
• pp.97-105
• /
• 2014

The purpose of this study is to identify the expected effects of LOHAS certification on business management performance. LOHAS certification which Korean Standards Association adopts and operates, contributes to improve the quality of healthy and happy life through the spread of eco-friendly and social responsible products and supports company's continuous growth and development through product value and image enhancement. The object of certification is divided into products and non products which is like services and space. In this study, empirical method using Questionnaire survey is used to look through the expected effect of LOHAS certification on business management performance focused on the manufacturing companies which acquired LOHAS certification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.193-198
• /
• 1999

In the 21th century, everyone feels that the multimedia system is close at hand in real life due to the rapid advance of the computer processing ability and high speed and high guality of communication services. Also the limited frequencies resource will be optimized due to rapid advances in digital video technology which is believed superior to analogue technology in information engineering. MEPG-2 has been introduced for broadcasting use such as digital TV Thus it features the high-definition and hyper-low bit rate. But, because of much throughput it has been implemented by high-priced private ASIC chip and is not in general use yet. But in this research, noticing the rapid enhancement of PC processor performance comparing with the price. MPEG-2 was developed by real time software MPEG-2 had been known impossible to implement with S/W, but the research proved the possibility of the S/W implementation and below are the pictures also in the research was improved 'Motion Vector and Compensation' Algorithm which requires the most operations and UT was made possible real time process. Multimedia Info Society has settled and accompanied by the rapid advance of image-processing technology and lots of standards.