• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 봄 학술대회 발표논문집 디자인 학 연구
• /
• pp.50-51
• /
• 1998

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.200-202
• /
• 2004

This paper deals with the real-time monitoring and control system using PC, PDA(Win CE embedded device) and PCS(based BREW platform). The camera attached to the server captures the moving target, and the captured frame of color image is encoded in JPEG for image compression at the server. The client(PC, PDA, PCS) receives the image data from the remote server and the received image is decoded from decompression. We use the TCP/IP protocol to send the image frames. The client can control the position of the camera by sending the control command to the server. Two DC servo motors for the camera are controlled in any directions, up-down and left-right, by the controller which is communicating with the server via the serial communication to get the control command. In this way, on the client we can monitor the moving images at the server and also control the position of the camera.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.173.2-173
• /
• 2001

In this paper, an Internet-based monitoring system is studied which analyzes visual image of drifted snow and measures the amount of snowing. The system is composed with reference ruler where LED's are attached, a camera, and PC with a controller. The length of the ruler is 1.5m and the interval of the LED's is 1cm. The controller synchronizes the on-off control of each LED with the image frame of the camera. When the snow is accumulated along the ruler, the corresponding LED is blocked and the lowest position of the lighted LED is estimated with this captured image of the camera. Because of week intensity of LED light and light rays of outdoors, it is hard to discriminate which LED is blocked due to snow. Image processing method is used to obtain proper resolution and good accuracy. This system ...

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.137-140
• /
• 2008

Recently many areas require wide field of view images. Such as surveillance, virtual reality, navigation and 3D scene reconstruction. Conventional camera systems have a limited filed of view and provide partial information about the scene. however, omni directional vision system can overcome these disadvantages. Acquiring 360 degree panorama images requires expensive omni camera lens. In this study, 360 degree panorama image was tested using a low cost optical reflector which captures 360 degree panoramic views with single shot. This 360 degree panorama image system can be used with detailed positional information from GPS/INS. Through this study result, we show 360 degree panorama image is very effective tool for mobile monitoring system.

• 한국수산과학회지
• /
• 제28권3호
• /
• pp.309-315
• /
• 1995

This paper describes a monitoring system for fish farm formation effect based on personal computer by using an image processing technique. This method is based on image processing technique incorporating concept of window and threshold processing to track the target object and to distinguish it from background. The image processing program runs in the veal time so that all program modules are able to process multi-task. The effectiveness is evaluated through the comparative study on the motion of lantern net for the scallop culturing by wave action in an experimental wave tank.

• 대한원격탐사학회지
• /
• 제34권2_2호
• /
• pp.407-418
• /
• 2018

환경, 사회적 요인에 의해 재난 발생 빈도와 위험성이 증가하고 있다. 불시에 발생하는 재난에 효과적으로 대응하기 위해서는 재난 지역에 대한 최신의 현장정보를 신속하게 파악하는 것이 매우 중요하다. 고속으로 생성된 영상지도를 통해 현장정보를 직관적으로 판단 가능하며, 이를 통해 재난에 신속하고 효과적으로 대응할 수 있다. 본 연구에서는 실시간 재난 모니터링을 위해 무인항공기 영상으로부터 지도생성 및 가시화를 수행하는 시스템을 제안하였다. 제안된 시스템은 항공부문과 지상부문으로 구성된다. 항공부문에서는 무인항공기 시스템을 이용하여 실시간으로 카메라와 GPS/IMU 센서로부터 센서데이터를 취득하고 통신모듈을 통해 지상서버로 전송한다. 지상부문에서는 전송된 센서 데이터를 처리하여 실시간으로 영상지도를 생성하고 이를 지오포털 상에 가시화한다. 구축된 시스템을 운용하여 생성된 영상 지도의 정확도 검증을 수행하였다. 인접한 영상지도 간의 차이를 계산하였을 때, 1.58 m의 상대정확도를 나타내었다. 개별 영상 지도로부터 측정한 위치에 대한 영상지도의 정확도를 정량적으로 확인한 결과, 0.75 m의 절대정확도로 기존 지도에 정합되는 것을 확인하였다. 영상지도가 가시화되기까지의 단계별 처리시간을 확인하였다. GSD 10 cm로 처리하였을 때, 가시화가 되기까지 1.67초의 시간이 소요되었다. 제안된 시스템을 이용하여 재난 대응을 위한 실시간 모니터링에 적용할 수 있을 것으로 기대한다.

• 한국정보전자통신기술학회논문지
• /
• 제11권1호
• /
• pp.82-88
• /
• 2018

기존의 원격 화재 모니터링 시스템은 화재 현장의 영상 정보를 실시간으로 확인 할 수 있는 기능이 충분하지 않아 화재 발생 시 실제 상황을 면밀히 파악하여 대처하는데 어려움이 있었다. 이러한 문제를 해결하기 위하여 본 논문에서는 RTSP 모듈을 이용한 원격 화재 영상 모니터링 시스템 설계 방안을 제안한다. 화재 현장을 실시간으로 문자와 경보음 및 영상 정보를 확인하기 위한 장치로서 RTSP 모듈, 전용서버와 클라이언트 그리고 원격 화재 모니터링 시스템으로 구성한다. 이동형로봇 등에 부착된 카메라에서 송수신하는 영상을 Wi­Fi를 이용하여 RTSP 기능이 포함된 서버 및 클라이언트 시스템과 연동한다. 설계한 실시간 동영상의 수신이 가능한 일체형 원격 화재 영상 모니터링 시스템을 구현하고 시험을 통하여 정상적으로 동영상이 수신됨을 확인 하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.653-655
• /
• 2005

More than 70 percent of terrestrial territory of Korea is mountainous areas where degradation becomes serious year by year due to illegal tombs, expanding golf courses and stone mine development. We elaborate the potential usage of high resolution image for the monitoring of the phenomena. We made the classification of tombs and the statistical radiometric characteristics of graves were identified from this project. The graves could be classified to 4 groups from the field survey. As compared with grouping data after clustering and discriminant analysis, the two results coincided with each other. Object-oriented classification algorithm for feature extraction was theoretically researched in this project. And we did a pilot project, which was performed with mixed methods. That is, the conventional methods such as unsupervised and supervised classification were mixed up with the new method for feature extraction, object-oriented classification method. This methodology showed about $60\%$ classification accuracy for extracting tombs from satellite imagery. The extraction of tombs' geographical coordinates and graves themselves from satellite image was performed in this project. The stone mines and golf courses are extracted by NDVI and GVI. The accuracy of classification was around 89 percent. The location accuracy showed extraction of tombs from one-meter resolution image is cheaper and quicker way than GPS method. Finally we interviewed local government officers and made analyses on the current situation of mountainous area management and potential usage of KOMPSAT-II images. Based on the requirement analysis, we developed software, which is to management and monitoring system for mountainous area for local government.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.645-648
• /
• 2005

The COMS(Communication, Ocean and Meteorological Satellite), a multi-mission geo-stationary satellite, is being developed by KARl. The first mission of the COMS is the meteorological image and data gathering for weather forecast by using a five channel meteorological imager. The second mission is the oceanographic image and data gathering for marine environment monitoring around Korean Peninsula by using an eight channel Geostationary Ocean Color Imager(GOCI). The third mission is newly developed Ka-Band communication payload certification test in space by providing communication service in Korean Peninsula and Manjurian area. There were many low Earth orbit satellites for ocean monitoring. However, there has never been any geostationary satellite for ocean monitoring. The COMS is going to be the first satellite for ocean monitoring mission on the geo-stationary orbit. The meteorological image and data obtained by the COMS will be distributed to end users in Asia-Pacific area and it will contribute to the improved weather forecast.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1587-1594
• /
• 2003

Increased energy costs have placed demands for improved combustion efficiency, high equipment availability, low maintenance and safe operation. Furthermore low NO$_x\$ modification, installed due to strict environmental legislation, requires very careful combustion management. The flame monitoring system has been developed specially to satisfy these requirements. We aimed at gaining the relationship between the burner flame image and emissions such as NO$_x$ and unburned carbon in furnace by utilizing the image processing method. For the first step of development, its possibility test was undertaken with bench furnace. The test proceeded to the second step with pilot furnace and the system was observed to be effective for evaluating the combustion conditions. By using this technology, it is possible to perform continuous monitoring of the combustion conditions and instant detection of individual changes for each burner to prevent future loss of ignition. This may contribute to the saving of burner adjusting times for the changes of loads and fuels and to the reduction of the slagging as well.