• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.299-300
• /
• 1998

Recently the development of medical modality like as MRI, 3D US, DR etc is very active. Therefore it is more required not only the enhancement of quality in medical service but the improvement of medical system based on quantization, minimization, and optimization of high speed. Especially, as the changing into the digital modality system, it gets to start using ASIC(Application Specific Integrated Circuit) to realize one board system. It requires the implementation of hardware debugging and effective speedy algorithm with more speed and accuracy in order to support and replace existing device. If objected image could be linked to high speed process board with special interface and pre-processed using FPGA, it can be used in real time image processing and protocol of HIS(Hospital Information System). This study can support the basic circuit design of medical image board which is able to realize image processing basically using digitalized medical image, and to interface between existing device and image board containing image processing algorithm.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.568-572
• /
• 2006

This paper presents the device of recognizing image of the studded paving blocks, transmitting, the information by vibration to a visually handicapped person. Usually the blind uses the walking stick to recognize the studded paving block. This research uses a PCA (Principal Component Analysis) based image processing approach for recognizing the paving blocks. We classify the studded paving blocks into 5 classes, that is, vertical line block, right-declined line block, left-declined line block, dotted block and flat block. The 8 images for each of 5 classes are captured for each block by 112*120 pixels, then the eigenvectors are obtained in magnitude order of eigenvectors by using principal component analysis. The principal components for images can be calculated using projection of transformation matrix composed of eigenvectors. The classification has been executed using Euclidean's distance, so the block having minimum distance with a image is chosen as matched one. The result of classification is transmitted to the blind by electric vibration signals with different magnitudes and frequencies.

• International Journal of Contents
• /
• 제13권4호
• /
• pp.70-79
• /
• 2017

Images are an important element in patents and many experts use images to analyze a patent or to check differences between patents. However, there is little research on image analysis for patents partly because image processing is an advanced technology and typically patent images consist of visual parts as well as of text and numbers. This study suggests two methods for using image processing; the Scale Invariant Feature Transform(SIFT) algorithm and Optical Character Recognition(OCR). The first method which works with SIFT uses image feature points. Through feature matching, it can be applied to calculate the similarity between documents containing these images. And in the second method, OCR is used to extract text from the images. By using numbers which are extracted from an image, it is possible to extract the corresponding related text within the text passages. Subsequently, document similarity can be calculated based on the extracted text. Through comparing the suggested methods and an existing method based only on text for calculating the similarity, the feasibility is achieved. Additionally, the correlation between both the similarity measures is low which shows that they capture different aspects of the patent content.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.719-722
• /
• 2019

Gamma-ray images generally suffer from a lot of noise because of low photon detection in the gamma camera system. The purpose of this study is to improve the image quality in gamma-ray images using a gamma camera system with a fast nonlocal means (FNLM) noise reduction algorithm with an acceleration function. The designed FNLM algorithm is based on local region considerations, including the Euclidean distance in the gamma-ray image and use of the encoded information. To evaluate the noise characteristics, the normalized noise power spectrum (NNPS), contrast-to-noise ratio (CNR), and coefficient of variation (COV) were used. According to the NNPS result, the lowest values can be obtained using the FNLM noise reduction algorithm. In addition, when the conventional methods and the FNLM noise reduction algorithm were compared, the average CNR and COV using the proposed algorithm were approximately 2.23 and 7.95 times better than those of the noisy image, respectively. In particular, the image-processing time of the FNLM noise reduction algorithm can achieve the fastest time compared with conventional noise reduction methods. The results of the image qualities related to noise characteristics demonstrated the superiority of the proposed FNLM noise reduction algorithm in a gamma camera system.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3380-3389
• /
• 2022

We evaluated the performance of an improved hybrid median filter (IHMF) applied to X-ray computed tomography (CT) images obtained using a high-resolution photon-counting cadmium zinc telluride (CZT) detector. To study how the proposed approach improves the image quality, we measured the noise levels and the overall CT-image quality. We established a CZT imaging system with a detector length of 5.12 cm and thickness of 0.3 cm and acquired phantom images. To evaluate the efficacy of the proposed filter, we first modeled two conventional median filters. Subsequently, we were able to achieve a normalized noise power spectrum result of ~10^-8 mm², and furthermore, the proposed method improved the contrast-to-noise ratio by a factor of ~1.51 and the coefficient of variation by 1.55 relative to the counterpart values of the no-filter image. In addition, the IHMF exhibited the best performance among the three filters considered as regards the peak signal-to-noise ratio and no-reference-based image-quality evaluation parameters. Thus, our results demonstrate that the IHMF approach provides a superior image performance over conventional median filtering methods when applied to actual CZT X-ray CT images.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4591-4596
• /
• 2023

Single-photon emission computed tomography SPECT image reconstruction methods have a significant influence on image quality, with filtered back projection (FBP) and ordered subset expectation maximization (OSEM) being the most commonly used methods. In this study, we proposed newly-designed adaptive non-blind deconvolution with a structural similarity (SSIM) index that can take advantage of the FBP and OSEM image reconstruction methods. After acquiring brain SPECT images, the proposed image was obtained using an algorithm that applied the SSIM metric, defined by predicting the distribution and amount of blurring. As a result of the contrast to noise ratio (CNR) and coefficient of variation evaluation (COV), the resulting image of the proposed algorithm showed a similar trend in spatial resolution to that of FBP, while obtaining values similar to those of OSEM. In addition, we confirmed that the CNR and COV values of the proposed algorithm improved by approximately 1.69 and 1.59 times, respectively, compared with those of the algorithm involving an inappropriate deblurring process. To summarize, we proposed a new type of algorithm that combines the advantages of SPECT image reconstruction techniques and is expected to be applicable in various fields.

• 복식
• /
• 제57권7호
• /
• pp.53-69
• /
• 2007

Advertisements create the illusion about the ideal body utilizing body beauty as well as come to influence in formation of the social beauty standard. Commodity advertisements using the body have been considered as the most effective advertisement method because of the fluidity and the dynamic, which are understood as organic body's characteristics. Especially, advertisement strategies utilizing body painting draw customer's attention because of the properties liberally performed on the living body. This thesis attends to study on the J. Deleuze's 'becoming' Phenomenon expressed in body painting, and to analyze about the body becomes fashion and commodity and is positively utilized as effective advertisement tools. J. Deleuze's 'becoming' Phenomenon expressed in advertisement utilized body which painting is classified as follows as; becoming fashion of the body, becoming commodity of the body, becoming advertisement sign board of the body, becoming animals and plants of the body, and becoming image of the body. The result of this study on the J. Deleuze's 'becoming' Phenomenon expressed in advertisements utilizing body painting shows multiple commodity's characteristics in order to satisfy with customer's various anxieties being changed continuously, and represents the characteristics of 21C advertisements utilizing the body being changed any other thing. Consequently, this thesis is aimed at new consideration about the body beauty, which has been extended to other sphere.

• 제어로봇시스템학회논문지
• /
• 제19권2호
• /
• pp.171-176
• /
• 2013

X-ray cross-sectional image-based inspection technique is one of the most useful methods to inspect the brazing joints of heat exchanger. Through X-ray cross-sectional image acquisition, image processing, and defect inspection, the defects of brazing joints can be detected. This paper presents a method to judge the type of detected defects automatically, and to display them three-dimensionally. The defect type is classified as unconnected defect, void, and so on, based on location, size, and shape information of defect. Three-dimensional display which is realized using OpenGL (Open Graphics Library) will be helpful to understand the overall situation including location, size, shape of the defects in a test object.

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.256-261
• /
• 2013

In the steel manufacturing area, researches for defect inspection receive a big attention for quality control. This paper proposes an algorithm to detect a scratch defect on steel billets. This algorithm takes ROIs (Regions of Interest), and extracts 11 features which represent properties of defect on a ROI. SVM (Support Vector Machine) is used to classify defect and normal ROIs. The algorithm classifies a frame image of a Billet as a defect image if there is one or more defect ROIs. In the experiments, the proposed algorithm had reliable classifying accuracy.

• 제어로봇시스템학회논문지
• /
• 제9권10호
• /
• pp.844-851
• /
• 2003

We introduces a development result of semi-automatic karyotyping system using image processing method to improve a long time working of the manual method and 5% error of traditional automatic karyotying system for analyzing karyotying. The karyotyping procedures have many routine tasks such as searching metaphases, taking pictures, developing, editing, etc. There are several automatic karyotyping systems in order to reduce the task in advanced countries. However, they are very expensive, applicable to only human chromosome, and have too many functions to use easily. This paper takes aim at high quality image resolution and development of interface that can adjust brightness and contrast of image on-line. The system can be applied to animal and plants as well as human's chromosome. The system developed in this paper is applied to pig and human. The effectiveness of the system is proved by hospitals in Korea.