• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.38-48
• /
• 2011

Block based LCD backlight nonideality and crosstalk compensation methodologies are proposed based on the analysis of backlight profiles and image pixel homogeneity. Large computation complexity required in the conventional compensations is minimized without the degradation of image qualities by optimizing image block size, image area inside the block to be excluded from the compensation computation and the required backlight range to be computed. The optimization results of computation complexity as well as image qualities are verified for the proposed compensation by real image data simulations.

• The Research Journal of the Costume Culture
• /
• v.23 no.1
• /
• pp.117-125
• /
• 2015

The purpose of this study is to evaluate the differences of body compensation image on variations in the shoulder height and width of power shoulder raglan sleeve jacket. Nine samples were examined: 3 variations of the shoulder height and 3 variations of the shoulder width. The data was evaluated by 123 fashion design majors. The results were as follows; as a result of analyzing the body compensation image according to changes in the shoulder height and width of power shoulder raglan sleeve jacket, five factors were selected; the shoulder compensation factor, the bust compensation factor, the waist compensation factor, the arm compensation factor and the neck compensation factor. Among these factors, the shoulder compensation factor is the most important factor. Examining the major effect of the body compensation image based on changes in the shoulder height and width of power shoulder raglan sleeve jacket, it had an independent influence on factors about waist, neck, shoulder and arm compensation except a factor about bust compensation, had an influence on interacting effect of factors about shoulder, bust, waist, arm compensation, and it had no influence on interacting effect of a factor about neck compensation. This shows that the shoulder height has larger effect on neck compensation image than the shoulder width in power shoulder raglan sleeve jacket.

• The Research Journal of the Costume Culture
• /
• v.20 no.6
• /
• pp.912-922
• /
• 2012

With a long crotch length and much ease in the hip area, baggy pants are visually expressed in a variety of designs when compared with regular pants. The purpose of this study is to define the image differences of various baggy pants designs according to hip circumference and crotch length ease. To that end, this study deduced the visual image variable of experimental baggy pants and analyzed visual images according to changes in hip circumference and crotch length. Nine baggy pants with different levels of hip circumference and crotch length ease were produced as experimental pants. The image of each pair of experimental baggy pants was evaluated based on pictures taken of the pants worn by a woman in her 20s with a standard body figure. The image assessment team was composed of 105 clothing majors. The research results are as follows. Four visual image factors of experimental baggy pants were extracted: whole body compensation, lower body compensation, hip compensation, and waist compensation. Among the 4 factors, the whole body compensation factor was shown as the most representative factor. The body compensation image was higher with less hip circumference ease in the experimental baggy pants, and more hip circumference ease created the optical illusion of a larger body figure, presenting a significant difference between waist circumference and hip circumference. The lower body compensation factor, hip compensation factor, and waist compensation factor all showed a significant influence on changes in hip circumference ease. This result shows that changes in hip circumference ease exerted more influence on the body compensation image than did changes in crotch length ease. The results of this study provide basic data for predicting visual images according to differences in the level of ease in baggy pants, helping people select clothing suitable to their preferences and body shapes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2299-2311
• /
• 2013

As portable multimedia devices become more popular and smaller, the use of portable projectors is also rapidly increasing. However, when portable projectors are used in mobile environments in which a dedicated planar screen is not available, the problem of geometric distortion of the projected image often arises. In this paper, we present a geometric image compensation method for portable projectors to compensate for geometric distortions of images projected on various types of planar or nonplanar projection surfaces. The proposed method is based on extraction of the two-dimensional (2D) geometric information of a projection area, setting of the compensation area, and prewarping using 2D homography. The experimental results show that the proposed method allows effective compensation for waved and arbitrarily shaped projection areas, as well as tilted and bent surfaces that are often found in the mobile environment. Furthermore, the proposed method is more computationally efficient than conventional image compensation methods that use 3D geometric information.

• Journal of Korean Society for Quality Management
• /
• v.41 no.3
• /
• pp.405-412
• /
• 2013

Purpose: In this paper, the improvement of the image quality is investigated. The image quality is degraded by the drift phenomenon of EO/IR (Electro-Optical/Infrared) device on UAV. The drift phenomenon means that the image of EO/IR equipment on UAV(Unmanned Aerial Vehicle) moves to the unintended direction. This phenomenon should be improved for successful flight mission. Methods: To improve the drift phenomenon, the drift compensation method, the combination algorithm of FMC(Forward Motion Compensation) and AMC(Angular Motion Compensation) method, are introduced to calculate pitch and azimuth angle. Result values of pitch and azimuth angle are used for the improvement of image quality in EO/IR control logic. Results: The image quality is quantitatively improved more than 15 times through field test data of flight. Conclusion: Using the drift compensation technique, the image quality for EO/IR equipment is improved over 15 times than existing methods. This means the user of UAV with EO/IR device can perform a successful mission by keeping the line of sight for the target accurately.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.221-229
• /
• 2013

In this paper, the image formation by the motion compensation technique for Synthetic Aperture Radar system(SAR) were realized through the computer simulation. The motion compensation technique performed image data with the range compression, the compensation procedure, the azimuth compensation and the noise elimination procedure. The range compression procedure transform the SAR raw data into the frequency domain and correlate with the range reference function and then inversely transform into the time domain. The compensation procedure contain the aircraft fluctuations compensation and the radar image degrading effect elimination procedure which was caused by image formation algorithm itself. The aircraft fluctuations compensation procedure perform the first stage which correct the phase angle and the second stage which calculate the Doppler frequency and determine the coordinate of the received signal. The radar image degrading effect elimination procedure also perform range migration compensation and the image defocussing effect compensation. The azimuth compression procedure transform the compensation data to the frequency domain and correlate with the azimuth reference function. The azimuth correlated data are inversely transformed to the time domain which is called SAR image data. When the above procedure were completed, the image data contains the received signals mixed with noise. The threshold technique was applied to elimination the noise from the mixed image data.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.167-170
• /
• 2000

In this paper, we propose the edge compensation algorithm which connects the adjacent edges without losing the information of the skeletons on the edge image. The proposed edge compensation algorithm is composed of succeeding two steps. In the first step, the uplifted image is obtained by applying the uplifting process to the edge image. The next step is to extract the edge image from the uplifted image using the skeleton extraction algorithm. Experimental results show that the proposed method connects the adjacent edges without the distortion of the original edge information compared to the traditional method

• International Journal of Quality Innovation
• /
• v.5 no.1
• /
• pp.68-84
• /
• 2004

The measured values of a same object should remain constant regardless of the object's position in the image. In other words, its measured values should not vary as its position in the image changes. However, lens' image distortion, heterogeneous light source, varied angle between the measuring apparatus and the object, and different surroundings where the testing is set up will all cause variation in the measurement of the object when the object's position in the image changes. This research attempts to compensate the machine vision image distortion caused by the object's position in the image by developing the compensation table. The compensation is accomplished by facilitating users to obtain the correcting object and serves the objective of improving the precision of measurement.

• Journal of Broadcast Engineering
• /
• v.11 no.4 s.33
• /
• pp.396-406
• /
• 2006

This paper proposes an omni-directional image generation algorithm with parametric image compensation. The algorithm generates an omni-directional image by transforming each planar image to the spherical image on spherical coordinate. Parametric image compensation method is presented in order to compensate vignetting and illumination distortions caused by properties of a camera system and lighting condition. The proposed algorithm can generates realistic and seamless omni-directional video and synthesize any point of view from the stitched omni-directional image on the spherical image. Experimental results show that the proposed omni-directional system with vignetting and illumination compensation is approximately $1{\sim}4dB$ better than that which does not consider the said effects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2192-2200
• /
• 2015

In this paper, we propose an efficient vehicle image compensation algorithm based on Histogram Equalization. The proposed a vehicle image compensation algorithm was elimination to the vehicle image shake using motion compensation and motion estimation. And, algorithm was calculated the histogram of pixel values from each sub-image by dividing the image as the constant size areas in order to image enhancement. Also, it had enhancement to the image by adjusting the gradient. The proposed algorithm was evaluate the difference between of performance and time, image by applied to the IP, and were confirmed the image enhancement with removing of vehicle camera image shake. In this paper, the proposed vehicle image enhancement algorithm was demonstrated effectiveness when compared to existing vehicle image stabilization, because the elimination of shake for the vehicle images used real-time processing without using a memory. And it was obtained the reduction effect of the computation time by the calculated through block matching, and obtained the better restoration result for naturalness of the image with the lowest noise.