• 제목/요약/키워드: Image Artifact removal

검색결과 18건 처리시간 0.025초

Simple image artifact removal technique for more accurate iris diagnosis

  • Kim, Jeong-lae;Kim, Soon Bae;Jung, Hae Ri;Lee, Woo-cheol;Jeong, Hyun-Woo
    • International journal of advanced smart convergence
    • /
    • 제7권4호
    • /
    • pp.169-173
    • /
    • 2018
  • Iris diagnosis based on the color and texture information is one of a novel approach which can represent the current state of a certain organ inside body or the health condition of a person. In analysis of the iris images, there are critical image artifacts which can prevent of use interpretation of the iris textures on images. Here, we developed the iris diagnosis system based on a hand-held typed imaging probe which consists of a single camera sensor module with 8M pixels, two pairs of 400~700 nm LED, and a guide beam. Two original images with different light noise pattern were successively acquired in turns, and the light noise-free image was finally reconstructed and demonstrated by the proposed artifact removal approach.

3차원 이방성확산 방정식을 이용한 동영상의 영상잡음제거 (Noise removal or video sequences with ,3-D anisotropic diffusion equation)

  • 이석호;최은철;강문기
    • 대한전자공학회논문지SP
    • /
    • 제39권2호
    • /
    • pp.79-86
    • /
    • 2002
  • 최근에 확산방정식을 영상처리에 응용하는 연구가 세계적으로 활발하다. 특히 이방성확산 방정식은 영상에서 잡음을 제거하면서도 경계선을 강화시키는 성질로 인하여 영상잡음제거의 알고리즘으로 각광을 받고있다. 그러나 2차원 이방성확산방정식을 그대로 동영상의 영상잡음제거에 적용할 경우, 각 프레임간의 밝기 차로 인한 깜빡임 현상(flickering artifact)과 프레임간 필터링으로 인한 고스트 현상(ghost artifact)이 나타난다 그러므로 본 논문에서는 2차원 이방성확산방정식을 시퀀스 축으로 확장시킨 3차원 이방성확산방정식을 제안한다. 제안한 3차원 이방성확산방정식은 2차원 이방성확산방정식보다 더 효율적으로 영상잡음을 제거할 뿐만 아니라, 깜빡임 현상과 고스트 현상도 효율적으로 제거한다는 것을 이론적으로 그리고 실험적으로 검증하였다.

The Removal of Trembling Artifacts for FORMOSAT-2

  • Chang Li-Hsueh;Wu Shun-Chi;Cheng Hsin-Huei;Chen Nai-Yu
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.142-145
    • /
    • 2005
  • Since the successful launch of FORMOSAT -2 satellite by National Space Organization of Taiwan in May 2004, the Remote Sensing Instrument (RSI) on- board the FORMOSAT -2 has continuously acquired images at one panchromatic and four multi-spectral bands (http://www.nspo.org.tw). In general, the RSI performs well and receives high quality images which proved to be very useful for various applications. However, some RSI panchromatic products exhibit obvious trembling artifact that must be removed. Preliminary study reveals that the trembling artifact is caused by the instability of the spacecraft attitude. Though the magnitude of this artifact is actually less than half of a pixel, it affects the applicability of panchromatic products. A procedure removing this artifact is therefore needed for providing image products of consistent quality. Due to the nature of trembling artifact, it is impossible to describe the trembling amount by employing an analytic model. Relied only on image itself, an algorithm determining trembling amount and removing accordingly the trembling artifact is proposed. The algorithm consists of 3 stages. First, a cross-correlation based scheme is used to measure the relative shift between adjacent scan lines. Follows, the trembling amount is estimated from the measured value. For this purpose, the Fourier transform is utilized to characterize random shifts in frequency domain. An adaptive estimation method is then applied to deduce the approximate trembling amount. In the subsequent stage, image re-sampling operation is applied to restore the trembling-free product. Experimental results show that by applying the proposed algorithm, the unpleasant trembling artifact is no longer evident.

  • PDF

전산화단층촬영장치에서 링 아티팩트 제거 (Removal of Ring Artifact in Computed Tomography)

  • 천권수
    • 한국방사선학회논문지
    • /
    • 제9권6호
    • /
    • pp.403-408
    • /
    • 2015
  • 경엑스선은 물체의 내부구조 관찰에 유용하고 의료 및 산업분야에 광범위하게 사용되고 있다. 전산화단층촬영기법은 수백장의 투영영상을 이용하여 재구성함으로써 물체의 2차원 단면 영상을 얻을 수 있다. 단면 영상의 품질은 투영영상에 크게 의존한다. 투영영상을 얻는 검출기의 픽셀에 따라 링 아티팩트가 나타난다. 본 연구는 visual C++기반으로 한 원형 팬텀에서 검출기의 검출 에러에 따른 링 아티팩트 비를 조사하였다. 평행빔 및 부채살빔에서 링 아티팩트 비는 검출기의 검출 에러에 비례하여 나타났고, 회전 중심에 가까울수록 링 아티팩트는 강하게 나타났다. 전산화단층촬영의 단면 영상에서 링 아티팩트를 줄이기 위해서는 영상재구성 이전에 검출기의 보정이 필요함을 알 수 있었다.

웨이블릿 변환을 이용한 영상복원의 물결현상 제거 방법 (Ringing Artifact Removal in Image Restoration Using Wavelet Transform)

  • 윤진영;유윤종;전신영;신정호;백준기
    • 대한전자공학회논문지SP
    • /
    • 제45권6호
    • /
    • pp.78-87
    • /
    • 2008
  • 디지털 영상이 멀티미디어의 핵심 매체로 자리를 잡게 되면서 영상의 열화요인을 제거하여 원래의 품질에 가깝게 개선하는 영상 복원기술의 활용분야가 더욱 늘어나고 있다. 그러나 영상복원을 수행할 때 영상의 열화(degradation)가 선형공간불변이라고 가정하기 때문에 주파수영역에서 영상복원을 수행하면 그 결과 에지와 같이 밝기값의 변화가 큰 영역 주변에서 물결현상(ringing)이 나타나는 단점이 있다. 본 논문은 물결현상 제거를 위해 새로운 적응적 후처리 필터링 방법을 제안한다. 제안하는 알고리즘은 웨이블릿 변환을 사용하여 영상을 해석하고 에지 맵을 추출하고 영역을 나누어 에지영역과 물결현상을 검출한 후 이를 쌍방향필터(bilateral filter)를 이용해 제거한다. 실험결과를 통해서 제안하는 방법이 효과적으로 물결현상을 제거하는 동시에 중요한 에지를 보존할 수 있음을 확인할 수 있다.

자기공명영상에서 자장세기와 시퀀스에 따른 아티팩트 변화 (Metal Artifact Caused by Magnetic Field Strength and Sequence on T1WI-MRI)

  • 고성진
    • 한국콘텐츠학회논문지
    • /
    • 제10권9호
    • /
    • pp.302-308
    • /
    • 2010
  • 자기공명영상에서는 체내 금속물에 의한 강자성 인공물(Ferromagnetic artifact)이 발생하여 많은 영상의 왜곡을 초래 한다. 본 연구는 T1 강조영상의 자장 세기와 시퀀스에 따른 수술시 인체 내에 사용되는 금속물의 왜곡을 분석하여 영상 왜곡을 최소화 할 수 있는 시퀀스와 금속물의 종류를 알아보았다. SIEMENS사의 1.5T와 3.0T를 이용하였고, Ti+Al, Stainless, Nitinol 금속물을 팬텀 내에 각각 위치시켜 시퀀스별 SE(Spin Echo), TSE(Turbo Spin Echo), VIBE, Flash T1 강조영상을 획득하였다. 획득된 영상을 통해서 금속물질 주변에서 발생하는 영상의 왜곡 정도를 비교 및 분석하였다. 실험결과 임상에서 사용되는 모든 금속물에서 강자성 허상이 발생 하였는데, 그 중 TSE 시퀀스와 Nitinol 금속물에서 가장 작은 아티팩트가 발생하였다. TSE 시퀀스와 Nitinol이 사용된 1.5T 영상에서 면적 0.97 cm2, 장축 0.76 cm, 단축0.72 cm로 왜곡 정도가 가장 작게 나타났다. 그러므로 금속을 체내에 삽입한 환자의 검사를 위해서 3.0T 보다 1.5T 자기공명영상 장비를 사용하고, TSE 시퀀스를 사용하는 것이 T1 강조영상을 얻는데 가장 적합하다고 사료된다.

Moire artifact 제거 후 그리드 주파수에 따른 미세병변의 영상분석 (Image Analysis of Micro Lesions According to Grid Frequency After Removal of Moire Artifact)

  • 이상호;김규형;양오남
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제41권5호
    • /
    • pp.463-469
    • /
    • 2018
  • Morphological information such as shape and margin of micro lesion is important information for diagnosis of disease in clinical imaging. In this study, we investigated the morphological changes of the micro lesions by comparing the contrast and area in grid suppressed DR images according to grid frequency. In the profile analysis of the image, the mass showed an average intensity variation of 8.6 ~ 72.4 after suppression, The higher the grid frequency, the more the contrast was increased. However, in the images obtained using 103 lp / inch, which is a grid frequency less than the sampling frequency, the contrast of the mass in the vertical direction decreased after suppression. In the binary image, the area change of the mass was also large. As a result, the shape, size, and margin of the mass changed. In the case of very small calcification, the higher the grid frequency is the larger the change in contrast, so that a clear image can be obtained in the post-suppression image. However, we could confirm that the margin of the lesion was blurred and the lesion was lost in some of the images using the 103 lp / inch grid. The higher the frequency of the grid, The change of the contrast of fiber occurred largely and clear boundary was confirmed. The decrease of the number of pixels was small and morphological change was small. In conclusion, when using a grid frequency that is not suitable for the sample frequency, morphological changes or lesion loss of micro lesions in the post- suppression image may give the possibility of misdiagnosis in diagnosis and differentiation of the image.

Cause Analysis and Removal of Boundary Artifacts in Image Deconvolution

  • Lee, Ji-Yeon;Lee, Nam-Yong
    • 한국멀티미디어학회논문지
    • /
    • 제17권7호
    • /
    • pp.838-848
    • /
    • 2014
  • In this paper, we conducted a cause analysis on boundary artifacts in image deconvolution. Results of the cause analysis show that boundary artifacts are caused not only by a misuse of boundary conditions but also by no use of the normalized backprojection. Results also showed that the correct use of boundary conditions does not necessarily remove boundary artifacts. Based on these observations, we suggest not to use any specific boundary conditions and to use the normalized backprojector for boundary artifact-free image deconvolution.

잡음이 있는 X선 프로젝션에 적합한 웨이블렛 기반 영상재구성 (Wavelet based Image Reconstruction specific to Noisy X-ray Projections)

  • 이남용;문종익
    • 융합신호처리학회논문지
    • /
    • 제7권4호
    • /
    • pp.169-177
    • /
    • 2006
  • 이 논문의 목적은 X선의 감쇠를 이용한 측정에서 발생하는 여러 종류의 잡음을 효과적으로 제거하는데 적합한 영상재구성 방법을 제안하는 것이다. 구체적으로, X선의 방출기와 검출기의 필연적인 기계적 오류에 의해 발생하는 원형모양 오류와 전반적인 관측오차와 푸리에 변환기반 재구성 과정에서 나타나는 줄무늬 모양 잡음을 효과적으로 제거하기 위해 웨이블렛 방법을 제안한다. 원형모양 오류를 프로젝션에서 제거하기 위해 해당 잡음이 각도방향으로 강한 상관관계를 가지고 있음을 이용하여, 평균화된 정보에서 해당 잡음의 강도를 추정하고 이를 웨이블렛 축소법을 통해 제거하는 방법을 제안한다. 또한, 전반적인 잡음 제거와 영상재구성을 위해 웨이블렛-배규렛 분해법을 제안한다. 제안된 방법은 기존의 푸리에 변환을 기반으로 하는 방법에 비해 원형모양 오류와 영상재구성에 있어서 우수한 영상을 제공함을 시뮬레이션을 통해 확인하였다.

  • PDF