• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.45-45
• /
• 2001

종이 표변에 전분 사이징을 하는 목적은 종이가 액체에 대하여 침투저항성을 부여하 여 종이의 인쇄적성을 향상시키며 아울랴 종이의 표면적성과 종이강도 등의 물리적 특 성을 향상시키기 위해서 사용된다. 표면 사이징은 기본적으로 종이 표면에 전분을 이용 한 필름을 형성하여 종이 표면의 공극크기를 줄여 인쇄잉크 등과 같은 액체의 침투속 도를 늦여준다. 현재 국내에서 널리 사용되는 표면 사이징용 전분으로는 산화전분과 자 가변성용 일반전분이 있다. 자가변성용 전분은 효소나 APS로 전분의 chain 길이를 적 당한 점도로 잘라주는 것으로 전분 호액의 노화가 쉽게 일어나는 경향이 있다. 산화전 분은 전분회사에서 산화제를 이용하여 전분의 점도를 사용자의 요구에 따라 조절한 것 으로 water holdout이 개선되고 자가변성용 전분보다는 노화 안정성이 개선되지만 종 이 내부로의 칩투가 많이 일어나 전분 필름 강도가 약해지며 표면 강도 향상 효과가 적고 종이의 광학적 특성을 저하시키는 단점을 지니고 있다. 또한 약 10 ~ 20% 정도 사 용되는 파지의 재활용시 펄프 섬유에 흡착되지 않는 전분으로 인해 백수 내의 COD 및 B BOD를 증가시키는 원인이 된다.따라서 본 연구에서는 펄프 섬유와 친화력이 높아 지료 내첨용 지력증강제로 널리 사용되고 있는 양성 전분의 양이온 치환도 및 점도를 사이즈 프레스에 적합하게 조절 하여 백상지 제조업체의 라언에 적용하였다. 결과분석 항목으로는 파지 재활용에 따른 백수내 COD, 칼숨 이온함량 등의 백수 시스템의 변화와 종이의 물리적, 광학적 특성 및 ink jet 용지의 인쇄적성 등을 측정하여 산화전분과 비교하였다. 그 결과 약 20%의 C COD 감소 효과와 10%정도의 OPR 향상 효과를 얻을 수 있었다. 종이 물성의 경우 인 장강도와 뺏뺏이(stiffness) 및 지분 등을 측정한 결과 산화전분 보다 향상되었다. 특히 지분의 경우, 참여한 회사의 지분관련 complain이 약 80% 정도 감소하는 결과를 나타 내었다. 또한 백상지의 경우 ink jet 프린터에 많이 사용됨으로 ink jet 프린터의 인쇄 적성을 image analyzer로 측정한 결과 산화전분 보다 향상된 결과를 나타내었다.

• Archives of Reconstructive Microsurgery
• /
• 제10권1호
• /
• pp.12-17
• /
• 2001

Recovery of nerve injury is conditioned by various factors including physical state, injured site, cause of injury, and neurorrhaphy Many researchers have reported on regeneration of nerve using end to side neurorrhaphy. The purpose of this study was to examine regeneration of nerve in various conditioned side to side neurorrhaphy. Total of 25 male Sprague-Dawley rats weighing 220 to 250 gm were divided into five groups of five rats each. The group 1, sham group, composed of dissection only without nerve transaction. The group 2, control group, composed of nerve division only without neurorrhaphy or sural nerve graft. The group 3 composed of one segmental sural nerve graft between the tibial and peroneal nerve after division. Group 4 had two segment graft, and the group 5 with three segment graft, each segment being 6mm long and 5 mm apart. The side to side neurorrhaphy was performed between peroneal nerve and tibial nerve using segmental sural nerve graft in rats. We exposed the sciatic nerve, tibial nerve, peroneal nerve, and sural nerve on left side with prone position. The peroneal nerve was cut on the bifurcation site from tibial nerve and the side to side epineurial neurorrhaphy was performed between peroneal nerve and tibial nerve through 6 mm sural nerve segment graft with 11-0 nylon under operating microscope. The electromyography and the weight from ipsilateral tibialis anterior muscle was performed at one month after neurorrhaphy Peroneal and tibial nerve was examined at distal and proximal to the neurorrhaphy site by methylene blue stain under light microscope for histologic appearance. The number of nerve fibers were counted using the image analyzer. Statistically, both in electromyography and number of nerve fibers, the differences in values between the groups were significant.

• Journal of Acupuncture Research
• /
• 제23권3호
• /
• pp.37-45
• /
• 2006

Objectives : The study was conducted to investigate the effect of Deakumeumja herb-acupuncture on c-Fos expression in each area of the hippocampus of Alcohol intoxicated rats. Methods : Experimental groups were divided into five groups ; normal group, the alcohol-treated (control) group, the alcohol- 1 mg/kg Daekumeumja treated (sample A) group, the alcohol- 5 mg/kg Daekumeumja treated (sample B) group, the alcohol- 10 mg/kg Daekumeumja treated (sample C) group (n = 6 for each group). Rats of normal group were injected intraperitoneally with saline once a day for 5 consecutive days, while animals of the alcohol-treated (control) group were injected once a day with 2 g/kg of alcohol for the same duration of time. Animals of the alcohol and Daekumeumja-treated (sample A, B, C) groups were acupunctured at Chung-wan$(CV_{12})$ with 2 g/kg of alcohol and the appropriate amount of Daekumeumja extract once a day for 5 days. Each groups was evaluated by the changes of c-fos-positive neurons in each area of the hippocampus by using an image analyzer and microscope. Results: 1. In the CAI region of the hippocampus, the number of Fos-positive cells in the sample B, C groups were significantly increased compared with the control group. 2. In the CA2-3 regions of the hippocampus, the number of Fos-positive cells of the sample B, C groups were significantly increased compared with the control group. 3. In the Dentate gyrus region of the hippocampus, the number of Fos-positive cells of the sample C group was significantly increased compared with the control group. Conclusion : c-fos expression in each area of the hippocampus was reduced in alcohol-intoxicated groups. Treatment of Daekumeumja increased this reduction. In conclusion, it can be suggested that Daedumeumja possesses protective effects of the amnesia and learning disability in alcoholism.

• 한국결정성장학회지
• /
• 제17권2호
• /
• pp.75-81
• /
• 2007

[ $UO_2$ ] 소결체와 $U_3O_8$종자를 5wt% 첨가한 $UO_2$ 소결체의 치밀화 과정 및 입자성장 양상을 소결 온도 및 시간을 변수로 하여 분석하였다. $UO_2$ 성형체와 5wt% $U_3O_8$ 종자 첨가 성형체를 수소분위기에서 $1300^{\circ}C$에서 $1700^{\circ}C$로 온도를 올려가며 0시간에서 4시간 소결하여 밀도와 입자크기를 측정하였다. $1300^{\circ}C$까지는 종자 첨가에 상관없이 거의 같은 밀도를 가졌지만 온도가 올라가면서 종자 첨가 소결체의 치밀화가 저하되었다가 $1700^{\circ}C$ 근처에서 거의 비슷한 밀도를 가지게 된다. 입자성장의 경우, $1600^{\circ}C$에서는 종자 입자를 제외하면 기지상의 입자 크기는 거의 비슷하지만 $1700^{\circ}C$ 이후에서는 종자첨가 $UO_2$ 소결체의 입자성장이 종자가 첨가되지 않을 경우에 비하여 2배 이상 빠르게 진행되었다.

• Journal of Korean Neurosurgical Society
• /
• 제37권3호
• /
• pp.217-222
• /
• 2005

Objective: To achieve optimal fit of implant, it is necessary to bend the implant during spine surgery. Bending procedure may decrease stiffness of plate especially made of titanium and stainless steel. Typically titanium suffers adverse effects including early crack propagation when it is bent. We investigate whether 6 degree bending of titanium plates would decrease the stiffness after full cyclic loading by comparing with non-bending titanium plates group. Methods: Authors experimented 40 titanium alloy plates of 57mm in length, manufactured by 5 different companies. Total 40 plates were divided into two groups (20 bent plates for experimental group and 20 non-bent plates for control group). Twenty plates of experimental group were bent to 6 degree with 3-point bending technique and verified with image analyzer. Using the electron microscope, we sought for a initial crack before and after 3-point bending. Mechanical testing by means of 6000 cyclic axial-compression loading of 35N in compression with moment arm of 35mm-1.1 Nm was conducted on each plate and followed by the electron microscopic examination to detect crack or fissure on plates. Results: The stiffness was decreased after 6000 cyclic loading, but there was no statistically significant difference in stiffness between experimental and control group. There was no evidence of change in grain structure on the electron microscopic magnification. Conclusion: The titanium cervical plates can be bent to 6 degree without any crack or weakness of plate. We also assume that minimal bending may increase the resistance to fatigue fracture in cervical flexion-extension movement.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.31.2-31.2
• /
• 2008

We present the results offar ultraviolet (FUV, 1350-1750 ${\AA}$) auroral observations made by the Far-ultraviolet IMaging Spectrograph (FIMS) instrument on the Korean microsatellite STSAT-1. The instrument was capable of resolving spatial structures of a few kilometers with the spectral resolution of 2-3 ${\AA}$. The observations were carried out simultaneously with the measurement of precipitating electrons using an electrostatic analyzer (ESA, 100 eV-20 keV) and a solid state telescope (SST, 170 keV-360 keV) on board the same satellite. With a careful mapping of the field lines, we were able to correlate the particle spectrum to the corresponding FUV spectrum of the footprints of the FIMS image that varied significantly in fine scales. We divided the FIMS spectral band into the LBH long (LBHL, 1640-1715 ${\AA}$) and LBH short (LBHS, 1380-1455 ${\AA}$) bands, and compared the electron energies with the intensities of LBHL and LBHS for the well-defined inverted-V structures. The result shows a strong correlation between the total LBH intensity and the energy flux measured by ESAwhile the peak energy itself does not correlate well with the LBH intensity. On the other hand, it was observed that the ratio of the LBHL intensity to that of LBHS increased significantly as the peak electron energy increased, primarily due to a smaller absorption by O2 at LBHL than at LBHS.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2196-2201
• /
• 2010

지하철 운행 중 차지상간 무선영상전송을 위해 18GHz 대역을 이용한 OFDM 방식의 영상 전송 시스템을 개발하였다. 개발된 시스템은 디지털 변조 보드와 RF 보드로 구성하였으며, 지하철 터널구간 내에서 18GHz의 멀티패스 페이딩에 강한 특성을 가진다. 시스템의 검증을 위하여 스펙트럼 분석기를 사용해 전송 시스템의 출력 신호를 분석하였고, 분석결과 구현된 시스템은 350MHz에 대역폭 8MHz, -19dBm의 채널 파워를 가짐을 확인할 수 있었다. 또한, 영상의 송 수신 특성을 시험하기 위하여 SR사의 MPEG-2엔코더를 사용하여 영상을 입력하고 송신한 후 SR사의 수신기를 이용하여 영상 수신 실험을 하였다. 실험결과 송신한 영상이 손실 없이 수신됨을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.688-694
• /
• 2009

PCB의 먼지 제거용 세정제로 사용되는 스프레이형 세정제를 선정하여 이에 대한 청정도를 평가하였다. 친환경적인 대체 세정제를 채택하기 위해서는 세정제의 세정성, 환경성, 경제성을 평가하여 체계적인 선정절차에 의거하여 도입 및 적용하여야 한다. 객관적이고 효율적인 세정성 평가방법의 정립이 현시점에서 매우 중요하다. 본 연구에서는 여러 세정성 평가 방법들 중 표면관찰평가법인 SEM-EDX(Scanning Electron Microscopy/Energy-Dispersive X-ray) 분석과 적외선열화상카메라(THERMOVISION A20 model)를 이용하여 청정도를 평가하였다. CT-2770 모델의 사운드카드를 $2{\times}2cm$로 잘라내어 스프레이 세정 전과 후의 청정도를 SEM의 이미지 분석을 통해 관찰할 수 있었고 EDX의 성분분석을 통해 먼지의 제거율을 정량화할 수 있었다. 컴퓨터의 P4T-E 모델의 마더보드와 IPC-A-36 모델의 기판을 사용, 오염물로 먼지와 철가루를 사용하여 열화상카메라로 세정 전, 후의 상온과 $50^{\circ}C$ Oven에 방치된 시간의 차이에 따른 온도의 변화를 비교하였다.

• 한국주조공학회지
• /
• 제15권6호
• /
• pp.574-587
• /
• 1995

The $SiC_p-reinforced$ preforms fabricated by spray casting process were hot-extruded and subsequently T6-treated, and the morphology of the silicon phase and the grain size for these preforms and extruded samples were examined by Image Analyzer. Experimental observation revealed that with increase in volume percent of SiC particles, the grain size and silicon phase of the $Al-Si/SiC_p$ composites become finer, the shape of Si phase is changed from blocky to granular type, and aspect ratio of Si phase tend to become unity. Wear-tests with various sliding velocities, show that the wear resistance of spray cast specimen is increased remarkably compare to the permanent mold cast specimen at the sliding velocity range of $1.98{\sim}2.38m/sec$.. Microstructural observations for the worn surfaces of specimens revealed that wear resistance of Al-Si alloys at certain sliding velocities could be improved not only by the fine grain size of aluminum matrix but also the fine size and granular shape of silicon phases. The wear resistance of $SiC_p$ reinforced aluminum composites was found to be sensitive to the volume percentage of the reinforcing particles. The worn surfaces with various sliding velocities, show that change in wear mechanism seems to occur at the sliding velocity of near 2m/sec for all samples, and such a change in mechanism is delayed with increase in $SiC_p$ volume fraction.

• 한국주조공학회지
• /
• 제31권6호
• /
• pp.347-353
• /
• 2011

There is thixo-extrusion to form high strength aluminum alloy. But, it is a problem that grains become grain coarsening during reheating process because the alloy was exposed at high temperature. In order to solve grain growth during reheating process, calcium was added in Al-Zn-Mg alloys. Primary a grain sizes of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca were measured with image analyzer after reheating. Measured primary a grain sizes were applied to LSW(Lifshitz-Slyozov and Wagner) equation to check the effect of Ca on grain coarsening. Coarsening rate constant K values of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca alloys were $371\;mm^3s^{-1}$, $247\;mm^3s^{-1}$, $198\;mm^3s^{-1}$ and $166 mm^3s^{-1}$, respectively. As increasing calcium content, K value decreased which means grains are refined. Also, grains of calcium addition were more spherical than that of calcium free.