• 한국정밀공학회지
• /
• 제29권5호
• /
• pp.545-553
• /
• 2012

A Gimbal structure system in observation reconnaissance aircraft is made up of camera module and stabilization drive device supporting camera module. During flight for image recording, the aircraft undergoes serious accelerations with wide frequencies due to several factors. Though base excitation of stabilization drive device induces vibration of camera module, it must get the stable and clean images. To achieve this aim, acceleration of camera module must be reduced. Hence, vibration isolators were installed to stabilization drive device. Considering isolators and bearings in the stabilization drive device, vibration characteristics of gimbal structure system were analyzed by finite element method. For three translational direction, acceleration transmissibility of camera module was calculated by harmonic responses analysis in the frequency range of 5 ~ 500 Hz. In addition to, sine-sweep experiment were performed to prove correctness of present analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1318-1319
• /
• 2011

In this paper, we analyzed of growth and electrical characteristics of micro-cracks with thermal effect in PV module. The micro-cracks are increasing the breakage risk over the whole value chine from the wafer to the finished module, because the wafer or cell is exposed to mechanical stress. we experimentally analyze the direct impact of micro-cracks on the module power and the consequences after artificial aging. The first step, we made micro-cracks in PV module by mechanical load test according to IEC 61215. Next, PV modules applied the thermal cycling test, because microcracks accelerated aging by thermal cycling test. according to IEC61215. Before every test, we checked output and EL image of PV module.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1281-1283
• /
• 1995

In this paper, we develop a prototype of the Optical SCM transmission module. This module is possible to application to electric facilities for control and measurements. Transmission channel number is two channels, namely, image and digital signal. In the image transmission, modulation method is AM, baseband signal is NTSC video signal and demodulation use PLL. Modulation of digital signal is QPSK, 1.544Mbps and demodulation use PLL. First, we calculate theoretical analysis about RF and Optical link in the transmission. This calculation is well correspond with practical system and transmission experiment is excellent, but this is only two channel model. And now, we plan to multichannel transmission to measure intermodulation, frequency assignments and optimal channel numbers et al.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.597-602
• /
• 2013

본 논문에서는 렌즈화각 150도 이상의 메가 픽셀급 렌즈가 획득한 영상이 통형 왜곡을 보정하는 광각렌즈 모듈의 설계를 제안한다. 이로서 초광각 렌즈에서 획득된 영상은 WDR(Wide dynimic range) 2메가급 CMOS 이미지 센서데이터를 통해 초광각 영상의 왜곡영상을 보정하는 2 메가급 카메라 모듈의 왜곡영상의 화질을 개선한다.

• Journal of Information Processing Systems
• /
• 제16권4호
• /
• pp.795-808
• /
• 2020

Due to the poor evaluation indexes such as detection accuracy and recall rate when Yolov3 network detects aircraft in remote sensing images, in this paper, we propose a remote sensing image aircraft detection method based on machine vision. In order to improve the target detection effect, the Inception module was introduced into the Yolov3 network structure, and then the data set was cluster analyzed using the k-means algorithm. In order to obtain the best aircraft detection model, on the basis of our proposed method, we adjusted the network parameters in the pre-training model and improved the resolution of the input image. Finally, our method adopted multi-scale training model. In this paper, we used remote sensing aircraft dataset of RSOD-Dataset to do experiments, and finally proved that our method improved some evaluation indicators. The experiment of this paper proves that our method also has good detection and recognition ability in other ground objects.

• 정보저장시스템학회논문집
• /
• 제7권2호
• /
• pp.75-79
• /
• 2011

Recently mobile phone camera become generally spread, it is required to develop high resolution, multi-functional camera module for obtaining high image quality. To satisfy this demand, number of pixels has been increased and pixel size decreased in small mobile phone cameras. As a result, image quality is seriously dropped by blur phenomena. Especially when hand tremble is occurred, image quality is dropped by camera shake. Therefore, to obtain high quality image, it is necessary to compensate user's hand tremble. In this paper, we propose voice coil actuator for compensating hand tremble, which can apply optical image stabilization (OIS) system. Sensitivity analysis and size optimization are performed to obtain high driving force. Finally, it is confirmed that the optimized electromagnetic circuit can be applied in OIS system.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.67-74
• /
• 2003

One of the recent trends of cockpit development is to integrate the part of whole cockpit and compartment. The goal of this study is to develop and Analyze User's Convenience for a cockpit prototype based on the design guide of cockpit integration module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. After that process, next-generation Automotive cockpit has been embodied as graphical image designing. Henceforth, applying this module to real will be considered after evaluation of utilization. THis study is indicated that one example for evaluation of utilization.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.409-415
• /
• 2011

감시 정찰용 짐발 구조 시스템은 베어링들과 다른 기계 요소들로 구성된 복잡한 기계 장치이다. 이 시스템은 크게 카메라부와 카메라부를 지지하는 안정화 짐발로 나눌 수 있다. 영상 정보 취득을 위한 비행 중 짐발 구조 시스템은 정찰기로부터 전달되는 광범위한 진동수를 갖는 심각한 가진을 받게 된다. 비록 정찰기로부터 전달되는 안정화 짐발의 기초 가진이 카메라부의 진동을 유발할지라도 카메라부는 정확하고 선명한 영상을 기록하여야만 한다. 그러므로 카메라부를 포함한 전체 짐발 구조시스템의 고유진동수와 고유진동 모드를 분석하는 것이 중요하다. 이에 본 연구에서는 베어링들의 효과를 고려한 시스템의 진동 특성 해석을 유한요소법에 의해 수행하였다. 뿐만 아니라, 0 Hz ~ 500 Hz 의 진동수 영역에서 조화응답해석을 통해 카메라부의 가속도 전달률을 계산하였다.

• 우주기술과 응용
• /
• 제3권3호
• /
• pp.257-279
• /
• 2023

한국항공우주연구원에서는 심우주 탐사를 위한 핵심 기술 개발을 위해 6U급 초소형 위성인 HiREV(high resolution video and image)를 개발하였다. 6U HiREV 초소형 위성의 임무는 지구 관측을 위한 고해상도 영상 및 동영상 촬영이며, 임무 수행 시 고온의 카메라 모듈로 인해 렌즈와 모듈 간의 열 지향 오차가 발생할 수 있다. 열 지향 오차는 해상도에 큰 영향을 미치므로, 이를 해결하기 위해 열 설계가 필요하다. 또한 HiREV 광학 카메라는 지상에서 쓰이는 상용제품(COTS, Commercial Off The Shelf)을 이용하여 개발한 것이므로 상온에서 가장 좋은 성능을 가지며, 고온/저온 환경인 우주에서 활용되기 위해 별도의 열 설계가 적용되어야 한다. 본 논문에서는 임무 카메라 탑재체를 위해 3가지의 수동 열 설계가 수행되었으며, 궤도열 해석을 통하여 열 설계가 효과적임을 확인하였다.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.47-58
• /
• 2018

In this paper, we propose a method for skin condition analysis using a camera module embedded in a smartphone without a separate skin diagnosis device. The type of skin disease detected in facial image taken by smartphone is acne, pigmentation, blemish and flush. Face features and regions were detected using Haar features, and skin regions were detected using YCbCr and HSV color models. Acne and flush were extracted by setting the range of a component image hue, and pigmentation was calculated by calculating the factor between the minimum and maximum value of the corresponding skin pixel in the component image R. Blemish was detected on the basis of adaptive thresholds in gray scale level images. As a result of the experiment, the proposed skin condition analysis showed that skin diseases of acne, pigmentation, blemish and flush were effectively detected.