• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.663-671
• /
• 2014

LED lamp arrangement is a critical issue in indoor visible light communication (VLC) system. In this paper, we analyze the illumination distribution under the arrangement of $2{\times}3$ and propose a method to find the optimal lamp arrangement. The method, based on the MIMO (Multiple Input/Multiple Output) system model and taking the first order reflection into consideration, enables accurate analysis of the arrangement of the LED lamps for any room. The studies show that under the optimal arrangement the uniformity of illumination is improved from 0.55 to 0.86, which guarantees that users can get almost equal lighting effects, no matter where they locate themselves. At the same time, the RMS delay spread distribution which is used to evaluate the inter-signal-interference (ISI) is analyzed, and the simulation results indicate that the optimal arrangement also can improve the communication quality by reducing the fluctuation of the RMS delay spread.

• 융합보안논문지
• /
• 제7권1호
• /
• pp.1-10
• /
• 2007

의미있는 객체를 배경과 분리하는 영상분할기법은 침입자 경보 시스템, 교통 감시 시스템 등에서 중요한 역할을 담당하며, 일반적으로 공간적 동질성이나 시간적 정보를 이용하는 방법으로 나눌 수 있다. 시간적 정보를 이용하는 방법은 프레임간의 화소값이나 에지성분을 이용한다. 화소값 이용은 간단하며 효과적이나 조명 변화 등이 발생할 경우 움직임 검출이 어렵고 에지성분의 이용은 조명의 영향을 받지 않지만 복잡하며 잡음처리에 어려운 점이 있다. 따라서 본 논문은 카메라가 고정된 감시 시스템에서 화소값 비교와 에지 정보를 이용하여 조명등의 영향을 최소화하는 움직임 객체 추출 방법을 제안한다. 이는 조명변화와 배경영상의 존재여부에 따라 세 가지 움직임 객체 추출 방법을 달리 적용하며, 투영과 형태 처리 연산자를 사용하는 후처리과정을 거친 후 움직임 객체를 추출한다. 모의실험 결과 제안알고리즘은 조명변화가 발생하더라도 객체 추출의 결과가 우수함을 보이고 있다.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.376-383
• /
• 2013

The design of the LEDs lighting in general household illumination was proposed and compared with the fluorescent lighting in this study. Using the LED as a light source would promote energy saving lighting for household illumination purposes. We used the LightTools and DIALux software to design and simulate different standards of illuminance, different correlated color temperatures and different color rendering indices for household environments. The power consumption and efficiency of traditional illuminated light sources and an LED light source with the same standard of illuminance for lighting the household environment were analyzed and compared with each other. Finally, our results show the advantages of using white-light LEDs for lighting and household illumination.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.247-255
• /
• 2012

Daylighting has a very effective role in reducing power consumption and improving indoor environments in office buildings. Previously, it was not under consideration as a major source of renewable energy due to poor reliability in the design. Optical fiber as a transmission medium in the daylighting system demands uniform distribution of light to solve cost, heat, and efficiency issues. Therefore, this study focuses on the uniform distribution of sunlight through the fiber bundle and to the interior of the building. To this end, two efficient approaches for the fiber-based daylighting system are presented. The first approach consists of a parabolic mirror, and the second approach contains a Fresnel lens. Sunlight is captured, guided, and distributed through the concentrator, optical fibers, and lenses, respectively. At the capturing stage, uniform illumination solves the heat problem, which has critical importance in making the system cost-effective by introducing plastic optical fibers. The efficiency of the system is increased by collimated light, which helps to insert maximum light into the optical fibers. Furthermore, we find that the hybrid system of combining sunlight and light emitting diode light gives better illumination levels than that of traditional lighting systems. Simulation and experimental results have shown that the efficiency of the system is better than previous fiber-based daylighting systems.

• 한국태양에너지학회 논문집
• /
• 제32권6호
• /
• pp.11-21
• /
• 2012

In the normal office building, the energy consumption to maintain the reasonable intensity of illumination for the work by using the artificial illumination occupies 30% or greater of the whole building electric energy consumption. If the dependability of the artificial illumination is dropt by positively using the natural lighting from the outside, the large amount of electrical energy can be saved, in addition the more nice visual environment for work can be created. Daylight is lighting source that most closely match visual response of the human, because sunlight and skylight achieve the harmony. For this reason, the daylight of small amount than amount of the artificial lighting source also can give the same effect in work activities of human. In addition, if there is daylight at the window of the building, the energy can be saved by controlling the artificial lighting. In this paper, in the building using the photovoltaic power generation analyze the correlation between the amount of energy generated by photovoltaic and indoor illumination and this was proved through the simulation with Relux 2010. In addition, the amount of daylight inflow in the room and distribution was drawn by the equation and the ratio for the sectional dimming control of each lighting equipment was predicted and the energy saving amount according to this was calculated. As a result, the indoor illumination was satisfied with recommended illumination value of the office and consumption power could be reduced approximately with 20~70%.

• 방송공학회논문지
• /
• 제24권1호
• /
• pp.3-24
• /
• 2019

360 VR 기반 파노라마 영상을 제작하는 과정에서 인접한 장면을 촬영한 영상들일 지라도 촬영 각도 및 조명의 위치에 따라 영상들 간에 밝기 변화가 크고 색상값에서도 큰 차이가 발생한다. 이런 영상들을 스티칭하여 360 VR 영상을 만들면, 제작된 파노라마 영상의 품질이 저하되기 때문에 밝기 보상 기법을 전처리 과정으로 사용해야 한다. 기존의 밝기 보상 기법들은 밝기 차이가 적은 경우 또는 적은 장수의 영상들을 스티칭하는 경우에 적용되도록 설계되었기 때문에, 360 VR 서비스용 스티칭 기법에서처럼 스티칭되는 영상의 개수가 많고, 영상들 간의 밝기 차이가 클 경우에는 성능 저하가 발생하는 것으로 알려졌다. 본 논문에서는 기존의 밝기 보상 기법이 급격한 밝기 차이가 발생하는 360 VR 서비스에서도 효과적으로 이용될 수 있도록 추가의 '색상 보정' 및 '밝기 보정' 단계를 전처리 과정으로 사용함으로써, 복잡도 증가는 최소화하면서 360 VR 영상 합성의 성능을 향상시키는 것을 목표로 한다. 본 논문에서는 다양한 환경에서 촬영된 실험 영상들을 이용해서, 제안하는 기술이 기존 기술들의 성능을 향상시킬 수 있음을 보이고 있다.

• 한국태양에너지학회 논문집
• /
• 제23권3호
• /
• pp.63-71
• /
• 2003

According to the recent report, the lighting energy consumption of commercial buildings reaches to $30%\sim40%$ of the total energy consumption. It is more than that of cooling & heating energy consumption and it is the major target of energy-saving policy. It is obvious that they are interested in natural lighting device such as Light-shelf for the purpose of raising the lighting energy-saving efficiency. In most of highly developed countries, a thorough study on Light-shelf makes it possible to propose a practical plan while at home there leaves much to be desired to study a guiding principle of optimum plan in spite of its efficiency based on experiments using scale4 model and analysis of simulation. Aiming at making an optimum plan of Light-shelf suitable for the domestic situation, this study is worked by experiments using light-shelf and analysis of variables using illumination program. The experiments is to analyse the efficiency of Light-shelf on condition of the sky and the analysis is to make the simulation using illumination program. This study is composed of 1) the analysis of light with some variables such as presence of light-shelf and degree of angle using 1/2 scaled model 2) making the simulation using Lightscape, illumination program, In brief, concerning presence of light-shelf, it causes little difference in its efficiency in the overcast sky, whereas it decreases an illuminance of window side and provides inner side with the light, which decreases the ratio of the maximum to the minimum inner illuminance and makes the inner of illuminance to range evenly in the clear sky. On degree of angle, as the daylight increases in proportion of degree of angle, the ratio of the maximum to the minimum inner illuminance decreases, which makes it possible to increase the proportion of inner daylight.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.195-200
• /
• 1999

In computer graphics, the modeling and simulation of flames is a challenging problem. In this paper, we propose an approach for the simulation of a fire disaster. We use particle systems to describe the dynamic behavior fire. The illumination of dynamic flame is rendered by progressive radiosity algorithm.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.230-234
• /
• 2009

무대조명의 조도 시뮬레이션을 수행하여 얻은 결과치와 실제로 스튜디오 상에서 설치 후 조도값을 실측한 결과를 비교하여 발생하는 오차에 대하여 비교 연구 하였다.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1448-1456
• /
• 2019

본 연구에서는 작물재배용 단동식 유리온실 내에 LED 광원을 적용할 때, LED의 전원 공급을 위한 태양전지를 에너지 저감과 광투과율을 고려하여 Si 계열의 태양전지와 염료감응형 태양전지(DSSC)를 유리온실에 선별적 배치하고, 작물 재배에 유효한 태양전지의 광투과율을 결정하기 위해 유리온실의 천정과 측면에 대해 광투과율 변화에 따른 조도 시뮬레이션을 수행하였다. 또한, 유리온실에서 주광과 인공광인 LED 광원을 모두 고려하는 경우 최적 조명제어에 따른 유리온실의 에너지 절감 효과를 분석하였다.