• 방송공학회논문지
• /
• 제13권3호
• /
• pp.401-410
• /
• 2008

다시점 비디오 코딩에서는 뷰 또는 시간 방향 예측 시 현재 블록과 참조 블록간의 휘도 신호의 밝기의 차이를 보상하는 매크로 블록 단위 휘도 보상 툴이 포함되어 있다. 휘도 보상 툴을 사용함으로 객관적 화질 평가 측면에서 코딩 효율의 향상을 가져다주었지만, 주관적 화질 측면에서는 매크로블록 단위의 휘도 신호 평균값 보정에 의한 블록킹 현상이 많이 발생한다. 이 문제는 다시점 비디오 코딩에서 디블록킹 필터링의 강도를 설정하고 필터링을 수행하는 방법을 H.264/AVC의 방법을 그대로 적용하여 발생하는 것으로, 인터 블록 모드에서 휘도 보상을 수행한 평균값의 차이를 전혀 고려하지 않기 때문에 휘도 보상으로 인해 발생되는 블록킹 현상을 효율적으로 제거하지 못한다. 따라서 본 논문에서는 휘도 보상으로 발생하는 블록킹 현상을 분석하고 분석한 내용을 바탕으로 기존 알고리즘을 최소한으로 변경하면서, 효과적으로 디블록킹 필터링을 수행할 수 있는 방법을 제안한다. 제안하는 방법을 실제 적용하여 실험한 결과, 주관적 화질 측면에서 블록킹 현상이 사라지는 것을 확인할 수 있으며 평균적인 비트량을 측정하였을 때 최고 1.44% 감소하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.269-274
• /
• 2011

A solar cell is primary parts to produce electrical energy from the Sun. And, we can utilize those solar cells as a power generation system in home, factory, and so on. In order to make proper power, the solar cells are configured in series and parallel lay down. In condition of uniform illumination, the solar array will produce an enough power by photovoltaic effects from the solar cells. In case of non-uniform illumination on the solar cells, the power will be dramatically decreased compared to design. Fortunately, there were so many research outputs regarding the illumination effects on solar array. In this work, we tried to find out the non-uniform effects on unit CPV solar cell, because there were no research outputs for unit CPV solar cell considering illumination. The CPV solar cell was used in CPV system to make a power by the Sun. We chosen the triple junction solar cell of GaAsInP2Ge for simulation, which has a 30 % of conversion efficiency. By simulation, we obtained the output performance of CPV solar cells in condition of various illumination by using Hamming Window function. Its performance was degraded by 10 % to 50 % depending illumination conditions.

• 인간식물환경학회지
• /
• 제24권6호
• /
• pp.639-649
• /
• 2021

Background and objective: Various images from visual display terminals (VDTs) as well as living lighting are important parts of our daily life; thus, properly controlling the lighting environment - that is, illuminance, color temperature and good images from VDTs - can have a substantial effect on improving the mental health and work efficiency in everyday life. We examined electroencephalography (EEG) and heart rate variability (HRV) responses to various lighting conditions in 25 university students as they viewed images of a green landscape or traffic congestion. Methods: EEG was performed in darkness and when the room was illuminated with 10 different light-emitting diode (LED) color temperatures, while the EEG and HRV responses to green landscape or traffic congestion image stimuli were measured in darkness and during room illumination with three different LED color temperatures. Results: We found a significant difference between darkness and high LED illumination (400 lx) at 7 (CZ, F4, FZ, O1, O2, OZ, and T6) of 30 channels, while the alpha wave activity increased during darkness. In the second experiment, the green landscape image stimuli in the 30 lx-2600 K lighting condition elicited theta wave activity on the EEG, whereas the traffic congestion image stimuli under high LED illumination elicited high beta and gamma wave activities. Moreover, the subjects exhibited better stress coping ability and heart rate stability in response to green landscape image stimuli under illuminated conditions, according to their HRV. Conclusion: These results suggest that lower color temperatures and illumination levels alleviate tension, and that viewing green landscape image stimuli at low illumination, or in darkness, is effective for reducing stress. Conversely, high illumination levels and color temperatures are likely to increase tension and stress in response to traffic congestion image stimuli.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.391-393
• /
• 2002

Effects of illumination with xenon or sulfur lamp on growth of tomato seedlings were studied. Results showed no obvious differences in net photosynthetic rate and apparent quantum efficiency. In comparison with xenon lamp, illumination with sulfur lamp slightly reduced ChI a and ChI b content in leaves, relatively shortened epicotyl and hypocotyl length, but significantly increased anthocyanin content of leaves and promoted root growth of tomato seedling plants.

• Journal of the Optical Society of Korea
• /
• 제11권4호
• /
• pp.183-191
• /
• 2007

The highest diffraction efficiency(DE) value after illumination and post-curing of photopolymer films were obtained at the $SeO_2$/Acrylamide(AA) Ratios of AA 3.0 g, $SeO_2$ 1.0g and the DE's were stable values of over 90%. By the addition of $SeO_2$, the maximum DE at the initial stage of illumination was reached at 300 seconds, which suggests $SeO_2$ slows down the photopolymerization of AA, which enhances the maximum DE value by giving more migration time. DE variation curve for the optimum composition during extended-time illumination of 9,000 seconds resembles a sine curve due to the combination of the monomer diffusion and the photopolymerization, and the photopolymer film expanded by about 8% after photopolymerization due to monomer migration.

• KIEAE Journal
• /
• 제2권2호
• /
• pp.33-38
• /
• 2002

There are a number of practical uses for devices which are capable of piping large amounts of light: illumination of areas where there would be maintenance, safety, or security problems with electronic light sources; piping sunlight into indoor areas for illumination; and the conversion of high luminous efficacy, good color quality, high intensity discharge lamps into more acceptable linear of area sources of light. Prism light guides are hollow structures which pipe light by means of total internal reflectin(TIR). These devices are unique in their ability to combine the efficiency of TIR with the relatively low cost of hollow structure. An important application stems from their ability to transform a point source of light such as an incandescent or discharge lamp into a linear or area source of light or illumination. We report the development of an economical, flexible prismatic film for fabricating the light guide wall. This guide geometries and films are currently under development.

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.21-29
• /
• 1997

In this paper, we propose a new approach for recovering 3-D shape and extracting the reflectance properties of surface from intensity images. Photometric stereo method(PSM) is genrally based on the direct illumination. In this paper, the reflectance function is derived by interoduceing the indirect diffuse illumination in PSM and then applied to hybrid reflectance model which consists of two components; the lambertian and the specular reflectance. Under the hybrid reflectance model and the indirect diffuse illumination circumstance, the reflectance properties of sample surface can be extracting by normal sampler and then 3-D shape of an object can be recovered based on extracting reflectance properties. This method is rapid because of using the reference table and simplifies the restriction condition about the reflectance function existing in prior studies. Th erecovery efficiency in our method is better than that in prior studies. Also, this method is applied to various types of surfaces by defining general reflectance function.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.67-68
• /
• 2007

The introduction of high brightness LEDs with white light and monochromatic colors have led to a movement towards specialty and general illumination applications. Because drive circuit of illumination LED has an effect on efficiency and life, research about the drive circuit following LED characteristic is needed. This paper proposed a implementation of the stand-alone LED lighting system using battery from photovoltaic power generation.

• 정보처리학회논문지A
• /
• 제17A권4호
• /
• pp.189-196
• /
• 2010

본 논문에서는 모서리점, 경계선 및 영역, 적응적 임계값 등과 같은 복합특징을 이용하여 증강현실 시스템에서 마커의 차단현상이 발생되거나 어두운 환경에서도 사용 가능하면서 정합 성능을 개선한 마커검출 알고리즘을 제안한다. 기존의 ARToolkit에서는 마커의 일부분이 사용자에 의해 가려지거나 주위 조명 변화에 의해 입력영상의 밝기 변화가 크게 될 경우, 마커를 추출할 수 없는 반면 제안한 마커추적 알고리즘에서는 마커영역 추출시 적응적 임계값 기법을 사용하여 조명의 변화에 둔감하게 반응하여 정확한 마커영역만을 분리 추출할 수 있다. 그리고 모서리 여부를 판단하고 모서리점이 가려진 경우, 추출된 직선의 교점으로부터 모서리점을 추출하므로 차단에 의해 마커가 가려졌을 때에도 정확한 마커 영역을 추출할 수 있다. 또한, 등록된 마커와의 정합시, 와핑에서 발생되는 마커의 크기 및 중심위치 변화를 보정하는 기법을 추가하여 정합 성능을 개선 시켰다. 실험 결과 제안한 알고리즘은 주위 조명 변화와 차단 현상에 강인하게 마커를 검출하였으며, 유사한 마커 태그를 구분 할 수 있는 정합 유사도가 종전보다 30% 증가한 것을 확인 할 수 있었다.