• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.11
• /
• pp.514-520
• /
• 2002

n industrial computer vision systems, the image quality is dependent on the parameters such as light source, illumination method, optics, and surface properties. Most of them are related with the lighting system, which is designed in heuristic based on the designer's experimental knowledge. In this paper, a design code by which the optimal lighting method and light source for computer vision systems can be found are suggested based on experimental results. The design coed is applied to the design of the lighting system for the transistor marking inspection system, and the overall performance of the machine vision system with the lighting system show the effectiveness of the proposed design code.

• 한국가시화정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.92-96
• /
• 2007

Internal flow characteristics for an automobile HVAC have been investigated using a high-resolution PIV technique. The PIV system consists of a 2-head Nd:YAG laser(125 mJ), a high-resolution CCD camera($2K\;{\times}\;2K$), optics and a synchronizer. An automobile HVAC module was used directly. Only the casing was remodeled transparently for capturing flow image and laser sheet beam illumination. Time-averaged velocity field were measured in three temperature control mode. For three temperature control modes, the internal flow characteristics for an automobile HVAC system were evaluated from PIV results..

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.23-30
• /
• 2006

Effects of liquid-crystal droplets size on electro-optical properties of the polymer dispersed liquid crystals are investigated experimentally The liquid crystal droplets size was varied by controlling the Laser power for phase separation and LC/oligomer composition ratio. Electro-optical switching voltage is dependent on the LC/oligomer composition ratio and liquid crystal droplet size. The experimental results showed droplet size will be small and saturation voltage is increased but rise time will be short at high power illumination laser light for phase separation.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.687-688
• /
• 2008

Air flow of inside automobile HVAC module has been visualized using a high-resolution PIV technique with varying the temperature operation mode. The PIV system consists of a 2-head Nd:YAG laser(125 mJ), a high-resolution CCD camera(2K x 2K), optics and a synchronizer. A real automobile HVAC module was used directly with slight modification for clear optical windows. Some parts of the HVAC module casing were replaced with transparent windows for capturing flow images with laser light sheet beam illumination. Time-averaged velocity field were measured in three temperature control modes. Flow characteristics of the air-conditioned air flow in the automobile HVAC system were evaluated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.27-32
• /
• 2007

Head-Up Display system makes it possible for the driver to be informed of important vehicle data such as vehicle speed, engine RPM or navigation data without taking the driver's eyes off the road. Long focal length optics, LCD with bright illumination, image generator and vehicle interface controllers are key parts of head-up display system. All these parts have been designed, developed and applied to the test vehicle. Virtual images are located about 2m ahead of the driver's eye by projecting it onto the windshield just below the driver's line of sight. Developed head-up display system shows satisfactory results for future commercialization.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.41-46
• /
• 2016

An optical method to measure the three-dimensional (3D) shape of a surface with specular reflection is proposed. The proposed method is based on the analysis of the geometric path of the light from a point source, and the relative displacements of points in the reflection image. The 3D shape of a concave mirror is shown to be determined approximately via experiments, where the vision system consists of LED array illumination, a half-mirror, and an imaging sensor.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.903-904
• /
• 2006

This paper is about a vision system that exhibits automatic examination of the conditions of shaft's worm. The system is composed of three part : image acquisition, vision algorithm, and user interface. The image acquisition part is composed of motor control, illumination and optics. The vision algorithm examines the parts using shaft image. User interface is divided into two parts, user interface for feature registering with control value settings and user interface for examination operation. The automatic inspection system introduced in this paper can be used as a tool for final examination of shaft worm.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2007

A high power LED which is being used in many illumination applications as a new light source was simulated for its physical structure and then its optical properties were analyzed. To obtain accurate results from the designed LED model, properties of the die chip and reflector cup were varied. As a result, a high power LED model which has a radiation pattern of a Lambertian with its viewing angle of approximately $140^{\circ}$ and total included angle of $160^{\circ}$ was designed.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.41-45
• /
• 2002

In industrial computer vision systems, the image quality is dependent on the parameters such as light source, illumination method, optics, and surface properties. Most of them are related with the lighting system, which is designed in heuristic, based on the designer's experimental knowledge, In this paper, a design code by which the optimal lighting method and light source for computer vision systems can be found are suggested based on experimental results, To prove the usefulness of the design code, it is applied to the lighting system design of the transistor marking inspection system and the results are presented.

• Journal of the Korean Society of Visualization
• /
• v.6 no.1
• /
• pp.27-33
• /
• 2008

Air flow inside an automotive HVAC module has been investigated using a high-resolution PIV technique with varying the temperature operation mode. The PIV system consists of a 2-head Nd:YAG laser (125 mJ), a high-resolution CCD camera (2K$\times$2K), optics and a synchronizer. A real automotive HVAC module was used directly under real operating condition. Some casing parts of the HVAC module were replaced with transparent windows for capturing clear flow images with laser light sheet beam illumination. Time-averaged velocity fields were obtained for two different temperature control modes. Flow characteristics of the air-conditioned air flow inside the automotive HVAC system for the two temperature baffle conditions were evaluated.