• 한국컴퓨터산업학회논문지
• /
• 제10권3호
• /
• pp.99-104
• /
• 2009

본 논문에서는 형광등 on/off 제어 및 조도를 전력선 통신을 이용하여 원격으로 제어할 수 있는 시스템을 설계하고자 하였다. 각각의 조명기기를 전력선으로 구성되는 네트워크를 구현하였으며 원격 제어 및 조명기기의 on/off 및 조도를 제어하기 위하여 서버를 구성하고 서버에서 각각의 크라이언트를 제어할 수 있도록 하였다. 또한 기존 on/off 시스템을 디지털화하여 에러율을 감소시켰으며 회로를 단순화하는데 주안점을 두었다.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.18-29
• /
• 2015

The purposes of this research and development are as follows: first, to provide pleasant driving environments inside tunnels; second, to improve the current illumination environments lacking in diffusion luminance meters to meet tunnel lighting standards; and, third, to reduce the consumption of tunnel lighting energy accounting for approximately 65% of tunnel maintenance costs because of inadequate visual environments and tunnel operations. Further details are listed below. Firstly, an image luminance meter for tunnels that can implement the L20-method which is a tunnel luminance method that follows the international standards of CIE88, which was developed in order to improve and change the existing illumination-based tunnel lighting operation system to a luminance-based system. (The margin of error of below 5% according to the results of a test by an authorized agency and field test). Secondly, early illumination control is possible since the lighting control system that can be operated based on luminance enables interlocking control of the inside and outside of a tunnel using ethernet communication. Thirdly, guidelines for field application of the system are proposed. In addition, the luminance inducers of tunnels are found and the reflexibility of each facility that may reduce luminance of the boundaries is also proposed. Fourthly, as a result of a test bed, power consumption of luminance-based lighting operations decreased by 15.6% compared to illumination-based operations. Applying the feedback controls and maintenance factors of internal/external luminance meters, it reduced by 36.4%. Therefore, we became able to provide a luminance-based lighting operation system that complies with tunnel lighting design standards and provides a visual environment for drivers.

• 한국항해항만학회지
• /
• 제42권6호
• /
• pp.421-426
• /
• 2018

현재 기존에 상용화 되어 있는 LED 조명기기의 경우, LED 동작 시퀀스가 고정이 되어 있는 상태로 판매되고 있다. 이와 같은 상태로는 외부 환경 요인이 고려되지 않고 오직 장소에만 적용되는 조명 환경 용도로서의 기능만을 수행한다. 현재는 선박 내 외부 환경 요인의 변화에 따른 최적의 조명 환경 조성이 어렵게 되어있다. 그러므로 외부 환경 요인의 변화에 좀 더 유기적이고 능동적으로 적응할 수 있도록 외부 환경 값을 입력받아 실시간으로 최적 조명 값이 반영될 수 있도록 해야 될 필요성이 있다는 결론을 얻게 되었다. 본 논문에서는 마이크로프로세서를 선박 통합관리 시스템으로 활용하여 기존의 외부 환경 요인에 의하여 실시간으로 변동되는 환경 데이터를 다루며, 외부 환경요인을 확인하고 또한 퍼지 추론 시스템을 접목하여 RGB LED 모듈 조명 제어가 가능한 제어기를 구성하였다. 이를 위하여 퍼지 제어 알고리즘을 설계하고, 퍼지 제어 시스템을 구성하였다. 외부 환경 요소인 피사체와의 거리, 조도 값을 센서로 통해 입력 받고 이 값들을 퍼지 제어 알고리즘을 통하여 최적 조명 값으로 변환하여 RGB LED 모듈 조광 제어를 통하여 표현하고 퍼지 제어 시스템의 실질적인 효능을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.503-506
• /
• 2003

The photovoltaic generators have a nonlinear V-I characteristics and maximum power points which vary with the illumination levels and temperatures. Using maximum power point tracker with the intermediate converter can increase the system efficiency by matching the PV systems to the load. A novel MPPT control for photovoltaic system is proposed. The system input parameters are (dP, dI, and last incremental of duty ratio $L\deltaD$)and the output is the new incremental value (new ${\deltaD}$) according to the maximum power point under various illumination levels. Using fuzzy logic controller allows extracting the maximum power rapidly and without significant oscillations. Also FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve control system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.188-191
• /
• 2013

본 논문은 수직형 정수처리시설 내의 에너지 절감을 위해 외부의 자연광과 인체감지를 통한 실내 조도 제어용 LED 조명 제어보드를 구성하여 무선 환경에서의 실시간 모니터링을 통해 조명 제어가 가능하도록 구성하였다. 또한, Zigbee 통신을 LED 조명에 적용함으로서 무선 데이터 전송과 능동적 LED 조명 밝기제어가 가능하도록 구성하였다. 제안한 제어방식은 외부의 자연광에 따라 조명의 밝기를 단계별로 디밍 제어하여 조절 및 제어함으로써 실내에너지를 실시간으로 제어하여 에너지 절약 효과를 극대화할 수 있다.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.121-125
• /
• 2021

The machine vision technology has been widely used in the industrialized nations like the United States, Japan, and EU in the various industries from the late 1980s. Machine vision inspection system mainly consists of a camera, optics, illumination and an image acquisition system. Optimization of the illumination light source is very important. This paper shows a comparison between Pulse Width Modulation (PWM) control and strobe control in driving LED lighting system for machine vision. PWM control method has problems such as a temperature rising of LED and a flickering in image measurement for inspection. In contrast, the proposed strobe control method can suppress the temperature of LED light source below 40℃. Also, it can remove the flickering problem through a synchronization between a frame grabber and a camera shutter. Finally, the strobe control method was shown to extract clearer images with a high precision compared to PWM control method.

• 한국항해항만학회지
• /
• 제47권2호
• /
• pp.85-92
• /
• 2023

The hardware of an LED lighting control system for coastal lighting at coastal pier entrance consists of a power supply unit, an AVR control unit, a CLCD output unit, an LED control unit, a scenario selection switch unit, and an operation speed display unit. It is made of an 8-channel. The CPU used ATmega128 and the FET was used to control the current signal. To operate the CPU, DC 12V was converted to DC 5V using a regulator 7805. A heat sink was used to remove heat generated in the FET. By connecting the load LED module to the manufactured 8-channel LED lighting control system, the operation was confirmed through various production scenarios. In addition, a control system was designed to show the most suitable color for the atmosphere of the coastal pier according to the input value of temperature and illumination using a fuzzy control system. Computer simulation was then conducted. Results confirmed that fuzzy control did not need to store many data inputs due to characteristics of artificial intelligence and that it could efficiently represent many output values with simple fuzzy rules.

• 제어로봇시스템학회논문지
• /
• 제15권3호
• /
• pp.265-272
• /
• 2009

In this paper, a simple optical method that uses an infrared(IR) cut filter is proposed to minimize variation of eye image by external infrared(IR) sources in a video based head mounted eye tracking system that is used in the field of sports. For this, the IR cut filter is attached to a head mount of the eye tracking system, and the camera with an IR LED is located between the IR cut filter and eye. In this structure, external IR is blocked by the IR cut filter, and the IR intensity on the eye can be controlled by the IR LED. Therefore, the illumination condition of the camera to capture the eye can be stable without being affected by external IR illuminations. To verify the proposed idea, variation of the eye image and intensity of the IR with/without the IR cut filter is measured under various illumination conditions. The measured data show that the IR cut filter method can block external IR effectively, and complex pupil detection algorithms can be replaced by a simple binarized method.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.478-486
• /
• 1993

For satisfactory greenhouse culture, environmental factors must be kept in proper conditions. Therefore, it is important to know relations between environmental conditions and greenhouse systems. In this study, the environment variations and distributions in different types of greenhouses were measured and analyzed. The elements of environment analyzed were temperature , relative humidity, illumination, carbon dioxide and wind velocity. The analyzed greenhouse types were three different types. One of them, A type, was propagation model type by government and the other one, B type, was multiple continuous arches type which was made by farmers himself. The last one, C type, was single arch type which has no environment control system without manual temperature keeping method. The results of this study can be used for reasonable greenhouse environments managements and control.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.960-967
• /
• 2013

Shape recognition of solder ball bumps in a BGA (Ball Grid Array) is an important issue in flip chip bonding technology. In particular, the semiconductor industry has required faster and more accurate inspection of micron-size solder bumps in flip chip bonding as the density of balls has increased dramatically. The difficulty of this issue comes from specular reflection on the metal ball. Shape recognition of a metal ball is a very realproblem for computer vision systems. Specular reflection of the metal ball appears, disappears, or changes its image abruptly due to tiny movementson behalf of the viewer. This paper presents a practical shape recognition method for three dimensional (3-D) inspection of a BGA using a 5-step ring illumination device. When the ring light illuminates the balls, distinctive specularity images of the balls, which are referred to as "iso-slope contours" in this paper, are shown. By using a mathematical reflectance model, we can drive the 3-D shape information of the ball in aquantitative manner. The experimental results show the usefulness of the method for industrial application in terms of time and accuracy.