• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.431-436
• /
• 2008

T-burner tests of an Al/HTPB propellant in conjunction with a Pulsed DB/AB Method were conducted to find an acoustic amplification factor. Aluminum-free and aluminum-heavy propellants were examined. Instant surface ignition was successfully made by the use of a supplementary propellant of fractionally higher reaction rate. With the presence of higher aluminum concentration in the propellants, the pressure perturbations were promptly damped down and the pressure fluctuations were no longer dispersive. Addition of aluminum particles into the propellant was advantageous for stabilizing pressure-coupled unstable waves.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.217-224
• /
• 2009

This paper presents a new AC/DC converter scheme for HVDC system to achieve a high power factor operation. The new AC/DC converter consists of two 12-pulse bridge converters in series: the primary and auxiliary converters. Ignition angles of the main and auxiliary converters are controlled independently to maintain the nominal DC voltage and control auxiliary voltage. The resulted DC voltage obtained by superimposing the above two phase modulated voltages can be controlled very rapidly over a wide range, and a high power factor operation is achieved. Performance improvements in power factor and harmonic distortion are validated by theoretic derivations and experiments with prototype HVDC system. With the proposed converters, investment for reactive power compensation and filter in HVDC system can be saved significantly.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.26-32
• /
• 2018

In order to analyze the effects of sediment on the occurrence of algal bloom on the Giheung Reservoir, the contamination levels of sediments were evaluated. The concentrations of various organic compounds (ignition loss), as well as the total nitrogen, total phosphorus, and heavy metals (Zn, Cr, Co, Ni, Pb, As, Hg, Cd) were analyzed in the sediments taken at eighteen sites of the reservoir. The concentrations of ignition loss and total nitrogen tended to increase from upstream to downstream, and ranged from 4.38 to 12.93% and 2,153 to 4,723 mg/kg, respectively. Heavy metals were in the order of Zn>Cr>Co>Ni>Pb>As>Hg, and the contamination level of the heavy metals was not high as a whole. The concentrations of the total phosphorus were in the range of 765 ~ 3,238 mg/kg, which exceeded the contamination level of the "Sediment Quality Assessment Guideline of River and Lake Sediment (Rule No. 2015-687 of the National Institute of Environmental Research, Korea)" at two upstream sites, four downstream sites, and all downstream sites. These results indicated that the pollution level of the total phosphorus, which is the main factor related to algal bloom, was found to be serious. Therefore, it is necessary to establish a countermeasure for sediment management in order to control the algal bloom which occurs periodically in the reservoir.

• 한국안전학회지
• /
• 제8권4호
• /
• pp.107-113
• /
• 1993

Small rectangular explosion chamber of its size 25cmX25cmX32cm with a circular bursting diaphram at the top was used to study the mechanism of gas explosion to fire transition phenomena, the process of ignition of solid combustibles during a gas explosion. To visulize the explosion to fire transition phenomena, transparent acryl window and high speed camera system were used. The test piece of solid combustible in this experiments was a 5cm$\times$5cm square sheet of newspaper which was placed in the explosion chamber filled with a LPG-air mixture. The mixture was ignited by an electric spark at the center of the chamber. Explosion to fire transition phenomena and the behavior of out flow and in flow of gas through the opening yielded by bursting the diaphram was visualized with shlieren system and without shlieren system. Diameter of a bursting dlaphram at the top of the explosion chamber was varied 5cm, 10cm, and 15cm, and the position of test piece were varied with 6 point. Explosion pressure was measured with strain type pressure transducer, and the weight difference of the test piece before and after each experimental run was measured. By comparing the weight difference of solid combustibles before and after the experiment and the behavior of out flow and inflow of gas after explosion, it was found that the possibility of ignition was depends on the LPG-air mixture concentration and the exposure period of test piece to the burnt gas. Test result of this experiments it was found that the main factor of this phenomena are that heat transfer to the test piece, and the pyrolysis reaction of test piece. Based on the results, the mechanism of the explosion to fire transition phenomena were inferred ; gas explosion- heat transfer to solid combustibiles ; pyrolysis reaction of solid combutibles : air inflow ; mixing of the pyroly gas with air ignition.

• 한국추진공학회지
• /
• 제18권2호
• /
• pp.16-26
• /
• 2014

연소 시, 입자상 물질에 대한 HTPB/AP 계열 고체추진제의 음향특성을 정량화하기 위해서, Pulsed DB/AB T-burner 실험을 수행하였다. 추진제 전면에서 동시 점화를 위해, 대상 고체추진제보다 연소속도가 빠른 다른 고체추진제를 대상 추진제 앞면에 부착하였다. 다량의 알루미늄이 포함된 고체추진제에서는 T-burner 내부에서 만들어진 압력섭동에 의한 음향학적 불안정성이 매우 빠르게 감쇠되었고, 반대로 알루미늄이 포함되지 않은 고체추진제에서는 상대적으로 매우 느리게 감쇠함을 확인하였다. 본 연구에서는 음향학적 특성값들을 정량화하였고, 이를 통해 연소응답 특성을 계산하였다.

• 한국분무공학회지
• /
• 제3권3호
• /
• pp.23-32
• /
• 1998

The effect of reentrant type bowl geometry on combustion characteristics was investigated in a D.I. diesel engine. The main factor was the aspect ratio (Bowl Diameter / Bowl Depth) of bowl of combustion chamber, and the cylinder pressure, engine performance and emissions of the engine using the 4 kinds of the combustion chamber were meadured. Also, the combustion characteristics compared of the experimented and the calculated values which is used by the Hiroyasu's combustion model. The results are as follows; The effect of $d_c/H$ on ignition delay period are small. The smoke is corerelated to the heat release of the premixed and the diffusion combustion, i.g, the smoke decreased by decreasing the premixed combustion or increasing the diffusion combustion on cumulative heat release. The premixed combustion process has more effect than the diffusion combustion on smoke. The formal tendency of $d_c/H$ on engine performance has not appear.

• 한국가스학회지
• /
• 제15권4호
• /
• pp.33-38
• /
• 2011

The introduction of alternative fuels is beneficial to overcome the fuel shortage and reduce engine exhaust emissions. LPG and CNG are relatively clean fuel and considered as most promising alternative automotive fuels worldwide because of its emission reduction potential and lower fuel price compared to gasoline. Now a day’s adaptation of dual fuel approach is the growing as common trend. The two fuels can be successfully implemented with existing gasoline engine with little modification. The present study was done to analyze the performance and emissions analysis of a multi cylinder spark ignition engine fuelled with the benefits of CNG and LPG aseffective alternate automotive fuels by simply using them in an unmodified petrol engine. The test results indicate, the energy content of CNG and LPG is the most limiting factor in acceptance for fuel economy and performance reasons. Thermal efficiency was high for CNG lowest for gasoline and LPG between the two. BSFC, CO and HC were low and NOx was high for CNG and low for gasoline, LPG lies between the two.

• 한국자동차공학회논문집
• /
• 제2권5호
• /
• pp.121-134
• /
• 1994

Shock tube investigation of ethylene oxide-$0_{2}-N_{2}$ mixture have been performed to reveal detonation characteristics of the mixture in terms of detonation pressure and speed. Theoretical calculation of thermodynamic parameters at the Chapmann-Jouguet detonation of the mixture has been also performed. A comparision of the observed results with the calculated ones can lead us to predict the detonation parameters of ethylene oxide in an artificial air. In addition, we have observed ignition delay times of ethylene oxide mixtures. The best fit of the observed delay times to Arrhenius gas kinetic relation gives : ${\tau}=10^{-144}{e{xp}}(E_a/RT)[C_{2}H_{4}O]^{-4.8}[O_{2}]^{-12.4}[N_{2}]^{-14.1}$ $E_a=3.67kcal/mole$ The observed activation energy is markedly reduced, compared with the case of ethylene oxide diluted in Ar. It could be due to the factor that $N_2$ play a role as detonation promoter yielding very reactive NOx radicals.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.734-738
• /
• 2017

본 연구에서는 가스다이내믹 공진 점화시스템 (Gas-dynamic Ignition System)의 온도상승 지배인자를 파악하고, 공진관으로의 질량유입 패턴의 영향에 대해 연구하였다. OpenFOAM 프로그램을 이용하여 세 가지 Case에 대한 전산해석을 수행하였으며, RhoCentralFoam을 적용하였다. 해석결과로, 작동유체의 가열이 공기열역학적 현상에 의한 것임을 밝히고, 공진관으로의 원활한 질량유입이 온도 상승에 중요한 지배인자임을 확인하였다.

• 전자공학회논문지
• /
• 제52권3호
• /
• pp.82-88
• /
• 2015

본 논문에서는 자동차 스마트 정션 박스(Smart Junction Box: SJB)의 소형화를 위하여 기존에 단위소자로 구성되어 있던 Enable 스위치 회로의 ASIC화를 위한 연구를 수행하였다. Enable 스위치 회로는 점화신호(Ignition: IG)를 입력으로 받아 SJB를 구성하는 Linear Regulator 및 다른 구성요소의 구동을 위한 Enable 신호 전달 역할을 한다. $0.18{\mu}m$ BCDMOS 공정을 사용하여 회로를 설계하였으며, 설계된 회로는 시뮬레이션을 통해 AEC-Q100과 ISO 7637-2에 기술된 조건을 만족함을 검증하였다. 설계된 Enable 스위치 회로의 레이아웃 크기는 $1.67mm{\times}0.54mm$이며, $3mm{\times}3mm$ 크기의 HVSON8로 패키징 할 수 있다. ASIC화된 Enable 스위치 회로는 단위소자를 사용하여 Enable 스위치 회로를 구성하였을 때 보다 소요면적을 1/30 이상 축소할 수 있는 것으로 확인하였으며, 이를 통해 SJB 보드의 소형화에 기여할 것으로 기대할 수 있다.