• 한국방재안전학회논문집
• /
• 제10권1호
• /
• pp.55-60
• /
• 2017

슬러지를 매립하는 경우 빗물의 유입이나 주변 지하수의 수분을 흡수하여 지반이 전체적으로 연약해 지는 경우가 발생한다. 본 연구에서는 탈수한 염색슬러지를 매립한 경우의 문제점을 확인하기 위해 염색슬러지와 염색슬러지-토사 혼합샘플에 대한 시험을 수행하였다. 염색슬러지가 배수가 원활하지 못한 매립지 내부에서 함수비가 높은 상태로 장기간 방치되면, 염색공장의 염색슬러지와 비교하여 투수성이 약 3/100 수준으로 낮아지고 압축성이 1.4배 증가하는 것으로 나타났다. 매립지의 안정성 확보를 위해 매립지 내부 함수비를 저하시키는 것이 중요하며, 배수로의 확보와 침출수 배제시설을 통한 관리가 필요할 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제25권5호
• /
• pp.509-515
• /
• 2014

At the fuel processing system (FPS) of fuel cell vehicle, hydrogen recirculation blower (HRB) is used for the recirculation of remained hydrogen after reaction. In this paper, noise and vibration improvement of HRB is studied by changing design and control. It is checked the campbell diagram and critical speed for stability of rotor, and housing stiffness is improved using simulation of frequency response function (FRF). A method is suggested that can decrease the unbalance amount of the rotor and impeller which main source of noise and vibration. In order to reduce the noise during deceleration of blower, electrical braking is applied and tested the risk impact of durability. Founded the optimum switching frequency of the motor control, and reduced the idle rpm by increasing of aerodynamic performance. The superiority of paper is proved by measurement of the improved product's noise and vibration.

• 에너지공학
• /
• 제19권3호
• /
• pp.171-176
• /
• 2010

천연가스-수소 혼합가스를 엔진 연료로 사용하는 방법은 배기가스 저감뿐만 아니라 다가올 수소에너지 시대를 대비하여 수소 인프라를 구축하는 데도 의의가 있다. 또한 수소 혼합 천연가스 연료 엔진은 천연가스 엔진 보다 더 높은 열효율 확보할 수 있어 에너지의 효율적 사용에 있어서도 매우 우수한 연료이다. 본 연구에서는 시내버스가 가장 많이 운전되는 조건인 아이들 조건을 대상으로 수소 혼합 천연가스 연료가 연료소모량과 배기가스 저감에 미치는 영향을 파악하였다. 실험 결과 수소 혼합 천연가스 연료는 천연가스에 비해 아이들 조건에서 연료소비율이 20%이상 저감되었으며 유해 배출가스인 THC, NOx를 근원적으로 저감시킴을 확인할 수 있었다.

• 컴퓨터교육학회논문지
• /
• 제13권1호
• /
• pp.53-64
• /
• 2010

본 논문에서는 모바일 그리드 환경에서 안정적인 자원을 선택하고 활용하는 자원 관리 방법을 제안한다. 모바일 그리드에서 이동 기기를 작업 처리에 이용하고자 하는 연구들이 많이 이루어지고는 있지만 모바일 장치의 불규칙한 이동성, 서비스 탐색, 자원 공유, 기기의 다양성, 제한적인 배터리 용량 등의 제약으로 인하여 기존 유선 그리드 환경에서의 작업 처리에 비해 신뢰성이 매우 낮다. 이러한 문제점을 해결하기 위하여 다양한 연구가 진행되었고 대표적으로 프록시 기반 모바일 그리드 구조와 에이전트 기반 모바일 그리드 구조를 들 수 있다. 본 논문에서는 IP 페이징을 프록시 기반 모바일 그리드 구조에 적용하여 보다 쉽게 유휴 자원 탐색과 그리드 자원 정보를 관리하고자 한다. 그리고 모바일 기기의 작업 관리를 위하여 SIP(Session Initiation Protocol)를 이용하여 지속적으로 모바일 기기의 이동성을 관리하고 페이징 캐쉬를 이용하여 모바일 기기의 자원 변화와 배터리 용량을 관리하여 자원 예약을 통해 진행 중인 작업의 이주를 허용하고자 한다. 시뮬레이션을 통하여 제안하는 모바일 그리드 구조가 효율적이고 안정적임을 보여준다.

• 제어로봇시스템학회논문지
• /
• 제6권8호
• /
• pp.629-637
• /
• 2000

Unbalance between user requirements and insufficient network resources makes a congestion. In the future since the communication networks will have very heavy traffic congestion will be more serious. The ATM networks was recommended to support the B-ISDN service for the future multimedia communication. In thie sense of congestion avoidance and recovery the ABR service category in ATM networks allows the feedback flow control mechanism to dynamically allocate the idle bandwidth of the network to users fairly and to control the network congestion rapidly In this paper we introduce a congestion control scheme using systematical approach to confirm robust stability with respect to unknown round trip delay for the network which has both unicast and multicast connections.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.747-748
• /
• 2008

In this paper, we propose a new algorithm for task scheduling consisting of subtask partitioning and subtask priority scheduling steps in order to keep the peak power under the system specification. The subtask partitioning stepis performed to minimize the idle operation time for processors by dividing a task into multiple subtasks using the least square method developed with power consumption pattern of tasks. In the subtask priority scheduling step, a priority is assigned to a subtask based on the power requirement and the power variation of subtask so that the peak power violation can be minimized and the task can be completed within the execution time deadline.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.11-18
• /
• 2002

Residual gas fraction in an engine cylinder affects engine performance, efficiency and emission characteristics. With high residual gas fractions, a flame speed and maximum combustion temperature are decreased and these are deeply related with combustion stability especially at idle and NOx emission at relatively high engine load. In this work, the residual gas fraction was calculated by an engine simulation code, which was validated by the experimental data (cylinder pressure and emissions) obtained from 4-cyliner spark ignition engine. A comparison between experimental and computational calculation results was made. The residual gas is generated mostly at low engine speed by the larger pressure difference between the intake and exhaust port. As the valve overlap duration was increased, the amount of residual gas in the cylinder, the amount of HC emission in the exhaust gas and the variation of power output increased.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1195-1198
• /
• 1993

We investigate a systematic design procedure of automated rule generation of fuzzy logic based controller for uncertain dynamic systems such as an engine dynamic model.“Automated Tuning”means autonomous clustering or collection of such meaningful transitional relations in the state-space. Optimal control strategies are included in the design procedures, such as minimum squared error, minimum time, minimum energy or combined performance criteria. Fuzzy feedback control systems designed by the cell-state transition method have the properties of closed-loop stability, robustness under parameter variabtions, and a certain degree of optimality. Most of all, the main advantage of the proposed approach is that reliability can be potentially increased even if a large grain of uncertainty is involved within the control system under consideration. A numerical example is shown in which we apply our strategic fuzzy controller design to a highly nonlinear model of engine idle speed contr l.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.101-108
• /
• 2011

On cold start operation of an SI engine, a catalyst shows poor performance before it reaches activation temperature. Therefore, fast warmup of the catalyst is very crucial to reduce harmful emissions. In this study, an appropriate control strategy is investigated to increase exhaust gas temperature through changes of spark timing. Combustion stability is also considered at the same time. Exhaust gas temperature and pressure of combustion chamber are measured to investigate the effects of spark timings on cold start and idle performance. Experiments showed that retarded spark timing promotes the combustion at the end of expansion stroke and increases exhaust gas temperature during cold start.

• 자동차안전학회지
• /
• 제11권1호
• /
• pp.48-54
• /
• 2019

Optimal engine control is needed to cope with the global environmental regulations that are globally enforced. For optimum engine control, the electronic throttle control system (ETCS) is a prerequisite. Automotive makers are having an effect on reducing emissions and improving fuel economy by applying ETCS which is designed to secure stability. The ETCS controls the output of the throttle valve by passing the output value of the accelerator position sensor (APS) to the engine control unit (ECU). In this study, the authors investigated the safety standards of domestic and overseas accelerator control system and tried to understand how the air flow control affects the engine output by replacing the throttle. The authors suggest an improvement proposal of safety standard based on the result of driving evaluation by various modes.