• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.346-350
• /
• 2008

Tests were conducted to obtain heat transfer coefficients during slush formation from 10% sucrose solution. The slush was made by scraping the ice formed on the cylinder. Cold brine was supplied inside of the cylinder to cool the outer surface. Below a certain brine temperature, which was $5^{\circ}C$ in this study, the solution was supercooled, and suddenly turned into ice. The super-cooling increases as the brine temperature increased. During slush formation, the heat transfer coefficient oscillated significantly, due to periodic removal of ice chunk form the surface. The average heat transfer coefficient during slush formation was approximately twice of that obtained during single phase cooling. The heat transfer coefficient was also affected by the brine temperature with increasing heat transfer coefficient at lower brine temperature.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.11
• /
• pp.643-648
• /
• 2009

Tests were conducted to obtain heat transfer coefficients during slush formation from 10% sucrose solution. The slush was made by scraping the ice formed on the cylinder. Cold brine was supplied inside of the evaporator cylinder to cool the outer surface. Below a certain brine temperature, which was $-5^{\circ}C$ in this study, the solution was supercooled, and suddenly turned into ice crystals. During slush formation, the heat transfer coefficient oscillated significantly, due to periodic removal of ice chunk form the surface. The average heat transfer coefficient during slush formation was 40~70% higher than that obtained during single phase cooling. The heat transfer coefficient was also affected by the brine temperature with increasing heat transfer coefficient at higher brine temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1466-1473
• /
• 2012

Soft icecream is made by scraping an ice formed on the inside of the cylindrical evaporator, where R-404A is evaporating in the annulus. The heat transfer characteristics of the refrigerant evaporation and those during icecream formation were experimentally investigated. Results show that the refrigerant-side heat transfer coefficients are highly dependent on the location in the evaporator due to the complex annulus configuration. The heat transfer coefficient at the inlet is generally lower than those of other locations. The average heat transfer coefficient increases as heat flux increases or saturation temperature decreases. A correlation is developed to predict the refrigerant-side heat transfer coefficient. The icecream-side heat transfer coefficient oscillates continuously due to the periodic removal of ice formed on the surface. The average heat transfer coefficient during icecream formation is approximately 280 W/$m^2K$, and that during single-phase cooling increased from 150 W/$m^2K$ to 250 W/$m^2K$.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.233-238
• /
• 2005

According to change of flow around a circular tube for freezing, measured a variety of salinity of frozen layer. This study was experimentally performed to investigate freezing behavior of sea water along a vertical cooled a circular tube with bubbly flow. The experiments were carried out for a variety of parameter, such as air-bubble method, cooled -tube temperature and air-flow rate. It was found that the experimental parameters gave a great influence on the freezing rate and the salinity of the frozen layer.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.391-398
• /
• 2012

In this paper, prediction of centrifugal fan was conducted through combination the hybrid CAA method which was used to predict the fan noise with the FRPM technique which was used to generate the broadband noise source. Firstly, flow field surround the centrifugal fan was computed using the RANS equations and noise source region was deducted from the computed flow field. Then the FRPM technique was applied to the source region for generation of turbulence which satisfies the stochastic features. The noise source of the centrifugal fan was modeled by applying the acoustic analogy to the synthesized flow field from the computed and generated flow fields. Finally, the broadband noise of the centrifugal fan was predicted through combination the modeled noise source with the linear propagation which was realized using the boundary element method. It was confirmed that the proposed technique is efficient to predict the tonal and broadband noises of centrifugal fan through comparison with the measured data.

• Korean Journal of Food Science and Technology
• /
• v.33 no.6
• /
• pp.676-681
• /
• 2001

This study was carried out to evaluate the quality characteristics of frozen soy yogurts prepared with different proteolytic enzymes and starter culture. The viable cell counts of lactic acid bacteria in frozen soy yogurts were measured $10^8$ CFU/g by the single culture method, while $10^9$ CFU/g by the mixed culture method except ${\alpha}-chymotrypsin$ treatment. The viable cell counts of lactic acid bacteria did not decrease after freezing for 30 min in ice cream maker. The lactic acid bacteria from the mixed culture showed better bile acid tolerance than those from the single culture. The lactic acid bacteria from the frozen soy yogurt prepared with ${\alpha}-chymotrypsin$ and mixed culture of Bifidobacterium bifidum and Lactobacillus bulgaricus showed better acid tolerance and bile acid tolerance. The highest(73.45%) overrun was observed in the frozen soy yogurt treated with ${\alpha}-chymotrypsin$ and mixed culture of B. bifidum and L. bulgaricus. The melt-down percent was higher in the single culture than the mixed culture. In sensory test, the frozen soy yogurt prepared with ${\alpha}-chymotrypsin$ and mixed culture of B. bifidum and L. bulgaricus was the most desirable, the highest scores in sourness, bitterness and mouthfeel.

• Korean journal of food and cookery science
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2002

This study was carried out to evaluate the quality attributes of frozen soy yogurts prepared by freezine soy yogurts, which are made of different types of Bifidobacteria (B. bifidum, B.breve, B. infantis) and oligosaccharides (fructooligosaccharides, galactooligosaccharides, isomaltooligosaccharides) containing $\alpha$-chymotrypsin treated soy protein isolate were evaluated in terms of overrun, melt-down quality, changes in the total number of Bifidobacteria after freezing, and sensory evaluation. The quality attributes of soy yogurts were also evaluated in terms of changes in the number of viable cells of Bifidobacteria in soy yogurts after incubation at 37$\^{C}$, pH 3.0 for 90 min, water holding capacity, and viscosity. The overrun of frozen soy yogurts fermented by B. bifidum showed the hiehest value but those fermented by B. infantis showed the lowest, while the melt-down quality of soy yogurts were vice versa. The total numbers of Bifidobacteria after freezing for 30 min in ice cream maker showed more than 10$\^$9/ CFU/ml. In sensory evaluation, all $\alpha$-chymotrypsin treated frozen soy yogsurt showed little beany flavor. In sour, sweet, and bitter tastes and mouth feel, the frozen soy yogurts fermented by B. bifidum evaluated better but those fermented by B. infantis evaluated worse. Also in the overall quality, the frozen soy yogurts fermented by B. bifidum were evaluated desirable but those fermented by B. infantis were evaluated undesirable. The water holding capacity and viscosity of soy yogurts fermented by B. bifidum showed the highest values but those fermented by B. infantis showed the lowest values. The total numbers of Bifidobacteria of all soy yogurts decreased from 10$\^$9/ CFU/ml to 10$\^$8/ CFU/ml after incubation at 37$\^{C}$, pH 3.0 for 90 min.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.42-50
• /
• 2021

Along with the rapid growth of the food service industry, food safety requirements and hygiene are increasing in importance in restaurants and hotels. Accordingly, there is a need for quick and practical monitoring techniques to determine hygiene status in the field. In this study, we investigated 5 domestic 5-star hotels specifically, personal hygiene (hands of workers), cooking utensils (knife, cutting board, food storage container, slicing machine blade, ice-maker scoop) and other facilities (refrigerator handle, sink). In addition, we examined the hygiene management status of customer contact points (tongs for buffet, etc.) to derive the correlation between the ATP values as a, a verification method. As a result of our five-hotel survey, we found that cooking utensils and personal hygiene were relatively sanitary compared to other inspection items (cookware 92.2%, personal hygiene 91.4%, facilities and equipment 76.19%, customer contact items 88.6%). According to our ATP-based mothod, kitchen utensils (51 ± 45 RLU/25㎠) were relatively clean compared to other with facilities and equipment (167 ± 123 RLU/25㎠). In the present study, we also evaluated the usefulness of the ATP bioluminescence method for monitoring surface hygiene at hotel restaurants. After correlation analysis of surveillance of hygienic status points and ATP assay, most results showed negative and high correlation (-0.64--0.89). Our ATP assay (92 ± 67 RLU/25㎠) of each item after cleaning showed signigicantly reduced results compared to the ATP assay (1020 ± 1254 RLU/25㎠) for normal status, thereby indicating its suitability as a tool to verify the validity of cleaning. By our results, ATP bioluminescence could be used as an effective tool for visual numerical evaluation of invisible contaminants.