• 대한임상검사과학회지
• /
• 제45권1호
• /
• pp.26-31
• /
• 2013

The cytology of sputum specimens, at a medical facility in Korea, is using the liquid-based cytology and conventional smear method. It confirms the diagnosis using conventional smear methods and the liquid-based cytology. In addition, the diagnosis uses two kinds of each method, compares the suitability, sensitivity and specificity for each test and tries to understand the efficient method needed. It divided sputum specimens in half and liquid-based cytology. A conventional smear method was conducted and the Papanicolaou's staining was conducted using Autostainer. Diagnosed each slide of staining produced smear slides specimens by using an optical microscope. The result of the liquid-based cytology and conventional smear method was that the liquid-based cytology was of a higher-grade than the conventional smear method. It was 36.8%, and 62.8% in the same condition. But only one case was of a lower grade. Liquid-based cytology showed 86.2% of adequacy, 31.0% of sensitivity and 97.5% of specificity. The conventional smear method showed 54.4% of adequacy, 19.6% of sensitivity and 100% of specificity. If it was conducted with two methods at the same time, the results would be similar to the liquid-based cytology. In conclusion, liquid-based cytology has a more superior adequacy and sensitivity than the conventional smear method. The combination of the two methods is similar to the result of only conducting a liquid-based cytology. Conducting a liquid-based cytology rather than the combination of the two ways of sputum cytoscopy, is to be considered as an efficient method to achieve diagnostic accuracy, reduce labor of clinical technologist and pathologist, and to reduce the expense of patients.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3629-3647
• /
• 2017

Certificate-based cryptography is a useful public key cryptographic primitive that combines the merits of traditional public key cryptography and identity-based cryptography. It not only solves the key escrow problem inherent in identity-based cryptography, but also simplifies the cumbersome certificate management problem in traditional public key cryptography. So far, four short certificate-based signature schemes have been proposed. However, three of them fail in achieving the existential unforgeability under adaptive chosen-message attacks and the remaining one was not constructed in the normal framework of certificate-based signature. In this paper, we put forward a new short certificate-based signature scheme. The proposed scheme is devised in the normal framework of certificate-based signature and overcomes the security weaknesses in the previous short certificate-based signature schemes. In the random oracle model, we formally prove that it achieves the existential unforgeability against adaptive chosen-message attacks. Performance comparison shows that it is efficient and practical.

• 기술혁신연구
• /
• 제8권1호
• /
• pp.73-94
• /
• 2000

The main objective of this research is to examine the spillover effects of technological knowledge from IT industry to other industrial sectors and, based on empirical findings, to draw policy implications and suggest policy directions. To this end, we divide IT industry into IT equipment and IT service, assuming that these two sub-sectors are considerably different each other in terms of technology knowledge flow. Other industries are classified into 17 different sectors based on the KSIC of 1990. As the proxy measure of technological knowledge, the notion of R&D stock is employed. The Input/output(I/O) Table is used to define the inter-industrial flow pattern and to draw the knowledge flow matrix. As the research methodology, cost function model is employed to gauge the spillover effects of technological knowledge of IT industry. Based on the results of analysis, it is found that the economic impact of technology diffusion also exhibits a different pattern between IT equipment and IT service. The diffusion of IT equipment tends to show labor-substitution effect whereas IT service displays labor-creation effect. This fact should be considered in devising industry, education, and labor policy. The expectations from this research are as follows. First, the sectoral pattern, difference between IT equipment and service in particular, identified from this research may shed light on the sector-specific policy direction. It is emphasized that a sector-specific approach, rather than an aggregate approach, is relevant for formulating IT policy. Second, it is expected that the importance of technology diffusion programs and policy measures are recognized among policy makers in IT industry.

• 영어어문교육
• /
• 제11권1호
• /
• pp.57-76
• /
• 2005

This study provides a rationale for using project-based learning with Korean students of English in Korea; in addition, it describes the process of creating and implementing project-based learning in the classroom and gives examples of how this unique teaching and learning method has been used successfully to teach learners with different levels of English proficiency. The first two chapters of the study examine the nature of project-based learning by comparing it with related fields of study, such as language teaching syllabi and methods, cognitive psychology, constructivists' views and interaction theory. The latter part of the study deals with issues related to applying project-based learning in Korean English classes. It emphasizes the importance not only of motivating active group effort and participation, but also in creating a trusting, cooperative relationship between group members in order to have a successful accomplishment of a project. The study concludes with implications for future studies.

• 산업공학
• /
• 제22권1호
• /
• pp.85-94
• /
• 2009

Nowadays, most of the major manufacturing companies prepare their manufacturing schedule using package based solutions. Even though the accuracy of the detail scheduling result is high at implementation, however, it is low during maintenance period. The main cause of low accuracy during maintenance period is due to difficulties in maintaining the accurate level of master data. In this paper, we propose to easily maintain setup time, which is one of the most important factors required in master data to achieve good scheduling result, after changing job. This paper is mainly focused on how to deduce the factors that influence the setup time in a roll-based manufacturing field with print operations. For this purpose, we employed rule based algorithm and applied for deciding setup time for the existing product items. Likewise, it can be applied to new items without any complex setup procedures, and, finally, it displays the result of the real setup-time and calculated setup-time.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.276-279
• /
• 2004

The location-based service is one of the most powerful services in the mobile area. The location-based service provides information service for moving user's location information and information service using wire / wireless communication. In this paper, we propose a model for personalized recommendation system which includes location information and personalized recommendation system for location-based service. For this service system, we consider mobile clients that have a limited resource and low bandwidth. Because it is difficult to input the words at mobile device, we must deliberate it when we design the interface of system. We design and implement the personalized recommendation system for location-based services(advertisement, discount news, and event information) that support user's needs and location information. As a result, it can be used to design the other location-based service systems related to user's location information in mobile environment. In this case, we need to establish formal definition of moving objects and their temporal pattern.

• 한국전자거래학회지
• /
• 제3권2호
• /
• pp.37-55
• /
• 1998

This study describes the works on development of a scenario-based WBT system of electronic commerce to introduce and activate electronic commerce in our society because it is mostly required to correctly understand electronic commerce and timely educate its users and technicians for entering into global electronic commerce that binds every commercial area regardless of the borders and nationalities. This system, WBT(Web - Based Training of Electronic commerce), consists of two parts. The one part provides a general concept of EC. This is developed to meet the needs of beginner for EC. The other is a simulator for cyber shopping mall. It is designed for teaching how to shop at cyber shopping mall based on various scenarios. In addition, we can simulate ourselves for EDI, which enables trading partners to conduct routine business transaction, such as purchase orders, invoices and shopping notices with it. Our commitment to the development of this application is consistent with the objectives of being easy to learn electronic commerce and its applications in real world.

• 디지털융복합연구
• /
• 제7권1호
• /
• pp.165-173
• /
• 2009

Many organizations require their current and perspective employees to obtain industry-based certification to maintain, and seek promotions. However, many certifications are simple knowledge based examinations that reward memorization instead of actual performance. With industry's increased reliance and demand to hire certified professionals, there is much more dishonesty, as well as incompetence, entering the system. This paper examines the issues and difficulties faced by organizations trying to hire IT staff based on current certification methodologies and recommends that IT assessments should be shifted from knowledge-based to performance-based examinations through the use of scenario-based simulations. It also demonstrates how to integrate simulations into certification and assessment testing using a proposed digital forensics certification as an example.

• Earthquakes and Structures
• /
• 제9권5호
• /
• pp.1045-1067
• /
• 2015

A performance-based design (PBD) procedure, initially proposed for the seismic design of buildings, is tailored herein to the structural configurations commonly adopted in bridges. It aims at the efficient design of bridges for multiple performance levels (PLs), achieving control over a broad range of design parameters (i.e., strains, deformations, ductility factors) most of which are directly estimated at the design stage using advanced analysis tools (a special type of inelastic dynamic analysis). To evaluate the efficiency of the proposed design methodology, it is applied to an actual bridge that was previously designed using a different PBD method, namely displacement-based design accounting for higher mode effects, thus enabling comparison of the alternative PBD approaches. Assessment of the proposed method using nonlinear dynamic analysis for a set of spectrum-compatible motions, indicate that it results in satisfactory performance of the bridge. Comparison with the displacement-based method reveals significant cost reduction, albeit at the expense of increased computational effort.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.145-148
• /
• 2011

As a futuristic construction model, building information model(BIM) based project management system(PMIS) and mobile PMIS have been showing visible sign. However, researches on the 3D BIM based PMIS using mobile device are hard to find, result from limitation of mobile device application(slow speed at huge BIM file, display size, and etc.) and undefined standard of business processes. Therefore, this research aims at studying feasibility of mobile BIM PMIS based on cloud computing as a business model. In case of applying mobile BIM PMIS, 3D drawings and integrated building informations are possible on mobile devices in real time. it would support increasing the productivity of project participants as designer, engineer, supervisor, and etc. Globally, BIM based PMIS and Mobile BIM system, cloud computing based mobile BIM simulator are in the concept or experimental phase, therefore it is possible to secure global leading technology of IT and construction merger in the mobile BIM.