• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.655-658
• /
• 1989

The characteristics of proton-diffused $LiNbO_3$ optical waveguides with self-aligned $SiO_2$-cladding are reported. When the proton diffusion occurs, the $SiO_2$-cladding limits the lateral diffusion of protons by out-diffusion of protons in unclad region. Proton indiffusion in depth direction is promoted by inhibition of out-diffusion in clad region. Consequently, the mode profile in depth direction can be nealy symmetric. The extent of the proton exchange was observed by measuring the infrared absorption peak at about $3500cm^{-1}$. It is confirmed that proton diffusion with $SiO_2$-cladding has structural excellency.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2486-2493
• /
• 1994

Transient heat transfer characteristics in th radiant heating panel with heat diffusion fin were predicted by numerical analysis. Thermal behaviors of panel, such as temperature distributions in panel and convective and radiative heat fluxes in panel surface with advance of time, were obtained for several important parameters. The performance and thermal comfort of heating panel were studied and compared for various design conditions, such as pipe pitch, area ratio and thermal conductivity of optimal design of the new heating panels with heat diffusion fin. It was concluded that the efficient area ratio of heat diffusion fin is about 0.5, and the greater the thermal conductivity of fin is, the better the performance of panel is.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.155-161
• /
• 2001

Anisotropic DWI - Mapping of the Proton Diffusion "tensor". In neural ordered tissue, it is thought that water diffusion is mainly influenced by the presence of myelin sheaths and intracellular structures. Perpendicular to the fiber tracts, the cholesterol-laden myelin lipid bilayers might restrict or hinder the spins from diffusing through the normally highly permeable cytomembrane. Diffusion along the fiber is more or less determined by subcellular structures, such as the endoplasmatic reticulum, mitochondria, neuro-filaments and macromolecules. In addition to that, the entire complex of axons and stabilizing tissue (i.e., glia cells, astrocytes) is also assumed to influence diffusion due to the tortuosity of proton translation, but the uniform distribution of such cells throughout the brain might render this notion less important as initially anticipated.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.699-704
• /
• 2003

Corrosion of reforcement is the main cause of damage and early failure of reinforced concrete structures. The corrosion is mainly progressed by the chloride ingress. In this paper, an experimental study is executed to investigate the effect of concrete properties and testing method on the coefficient of chloride diffusion. Also, it is compared that the relationship between total chloride and free chloride in concrete. According to this experiment results, w/c ratio and testing method effect on chloride diffusion coefficient of concrete. As w/c ratio is increased, diffusion coefficient in concrete is also increased. Diffusion coefficient obtained by each testing method show the different value, respectively. Also, the content of free chloride in 7days curing concrete is increased as w/c ratio is increased.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.2
• /
• pp.145-154
• /
• 2005

It is necessary to develop new air-conditioning method which can be satisfied individual separated space and request of occupants. The indoor thermal environment and flow field are investigated both experimentally and numerically. This study concentrated on analysis of indoor thermal environment by diffusion direction of ceiling type air conditioner of the classroom. The velocity and temperature distribution of air in the room calculated by 3-dimensional method, which include the effect of insulation of the building and outdoor state. This analysis shows that optimum diffusion direction is $30^{\circ}$ to increase thermal comfort in winter and optimum diffusion direction is $15^{\circ}$ to increase thermal comfort in summer.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1073-1075
• /
• 1998

This paper presents the method of parameter estimation of diffusion model for monitoring Demand-Side Management Program. Bass diffusion model was applied in this paper, which has different values according to parameters ; coefficients of innovation, imitation and potential adopters. Though it is very important to estimate three parameter, there are no empirical results in practice. Thus, this paper presents the method of parameter estimation in case of few data with constraints to reduce the possibility of bad estimation. The constraints are empirical results or expert's decision. Case studies show the diffusion curves of high-efficient lighting and also forecasting of the peak value for power demand considering diffusion of high-efficient lighting, the feedback and least-square parameter estimation method used in this paper enable us to evaluate the status and forecasting of the effect of DSM program.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.12
• /
• pp.979-985
• /
• 2007

Spray combustion characteristics of the conducting fuel electrospray has been studied for clean combustion technology. The electrospraying multiplexed system which can maintain the characteristics of the cone-jet mode is able to obtain charged micro droplets with high flow rate. In addition, they have monodisperse distribution during operating the electrospray in the cone-jet mode. The multiplexed grooved nozzle system with the extractor was applied to this experimental device set up. The stable grooved mode can be generated by the grooved nozzle and this electrospray system was applied to the diffusion combustion. It is the first step to discover the diffusion combustion characteristics of the electrospray, In case of the single grooved nozzle electrospray the diffusion flames are occurred at each Jet of grooved mode and they are quite stable. The exhaust gas analysis was indicated that there is the critical point which can make very stable diffusion combustion

• ETRI Journal
• /
• v.31 no.2
• /
• pp.215-224
• /
• 2009

Analyzing the diffusion of a convergence product is a new and challenging research field. It is very difficult to find research dealing with this issue due to the inherent complexity and lack of data. In analyzing the diffusion of a convergence product, we should simultaneously take into account its relationship with related single-function products because of their similarities in terms of technology and functionality. In this study, we empirically analyze the diffusion of the convergence mobile phones in South Korea and find that the convergence products can affect the diffusion of MP3 players and digital cameras positively or negatively. This research may be significant for business strategies in technology management and product development.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.51-55
• /
• 2005

In this paper, a near net shape technology using superplasticity and diffusion bonding characteristics was presented for application to various components of aircraft and missiles. Due to these special characteristics of some aerospace alloys, it is possible to produce complex components to shape very near final dimension with enhanced design freedom, reduced material usage, and overall saving of weight and cost. The high pressure vessel for a space launcher was fabricated with Ti-6Al-4V alloy by superplastic forming and diffusion bonding process and the failure characteristics are compared with conventionally fabricated vessel spin formed and TIG welded. The structural integrity of the superplastic forming and diffusion bonding process was successfully demonstrated.

• Journal of Powder Materials
• /
• v.7 no.3
• /
• pp.137-142
• /
• 2000

In order to analyze the densification behaviour of stainless steel powder compacts during hot isostatic pressing (HIP) at elevated temperatures, a power-law creep constitutive model based on the plastic deformation theory for porous materials was applied to the densification. Various densification mechanisms including interparticle boundary diffusion, grain boundary diffusion and lattice diffusion mechanisms were incorporated in the constitutive model, as well. The power-law creep model in conjunction with various diffusion models was applied to the HIP process of 316L stainless steel powder compacts under 50 and 100 MPa at $1125^{\circ}C$. The results of the calculations were verified using literature data. It could be found that the contribution of the diffusional mechanisms is not significant under the current process conditions.