• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.11
• /
• pp.961-968
• /
• 2009

In this work, transparent conductive oxide(TCO) films such as $In_2O_3-SnO_2$(ITO) and $In_2O_3-ZnO$(IZO) were prepared on polyethylene naphthalene(PEN) and glass substrates by using rf-magnetron sputtering system. The TCO films deposited on PEN substrate show very poor conductivity as compared to that of the TCO films deposited on glass substrates. From the results of the residual gas analysis(RGA) test, this poor stability of plastic substrate is presumed to be caused by the deteriorated adhesion between the TCO films and the plastic substrate due to outgassing from the plastic substrate during deposition of TCO films. From our experiment, it is found that the vaporization of some defects in the plastic substrates deteriorate the adhesion of the TCO films to the plastic substrate, because the most plastic substrates containing the water vapor and/or other adsorbed particles such as organic solvents. Mixing of these gases vaporized in the sputtering process will also affect the electrical property of the deposited TCO films. Inorganic thin composite $(SiO_2)_{40}(ZnO)_{60}$ film as a gas barrier layer is coated on the PEN substrate to protecting the diffusion of vapors from the substrate, so that the TCO films with an improved quality can be obtained.

• Journal of Digital Convergence
• /
• v.8 no.4
• /
• pp.185-204
• /
• 2010

This case study quantifies the savings that can be realized through integration in National Computing & Information Agency (NCIA) of the Korea Government. It is based on the process of the NCIA development project that consolidating and integrating distributed 24 agencies. And it used the widely accepted Gartner TCO (Total Cost of Ownership) Solution and applies that methodology consistently before and after integration. Specific measurement items for examining the information system integration saving cost are developed pilot test for 2 agencies through compare TCO before integration and TCO after integration. The results of measuring on information system integration in NCIA are showed lots of economic cost reduction in TCO by integrating and consolidating each computing environment in agency. Especially in detail, NCIA realized the most savings in IT Capital Cost including development of hardware, software and recovery system. Also IT Support Cost and IT Administration Cost examined more savings than before IT integration.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.47.2-47.2
• /
• 2011

High-efficient transparent conductive oxide (TCO) film-embedding Si heterojunction solar cells were fabricated. An improved crystalline indium-tin-oxide (ITO) film was grown on an Al-doped ZnO (AZO) template upon hetero-epitaxial growth. This double TCO-layered Si solar cell provided significantly enhanced efficiency of 9.23 % as compared to the single TCO/Si devices. The effective arrangement of TCO films (ITO/AZO) provides a good interface, resulting in the enhanced photovoltaic performances. It discusses TCO film arrangement scheme for efficient TCO-layered heterojunction solar cells.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.215-231
• /
• 2012

It is well known that SaaS(Software as a Service) changeover gives several advantages to organization. One of the advantages is the cost reduction effect of IT resources as well as IT human resources. Another one is the curtailment of software development workload in the field of informatization promotions. Nonetheless, it is hard to find comparison cases regarding the quantitative measurement of the introduction of SaaS before and after. Accordingly, when the Government IDC tries to adopt SaaS, it absolutely needs the empirical study whether SaaS is cost-effectiveness or not. In this study, we focus on variation in the Government administration common tasks, processes and labor costs. Using the Man-Month(MM) estimation methods, We verify that how much TCO(Total Cost of Ownership) is reduced per year.

• Information Systems Review
• /
• v.3 no.1
• /
• pp.131-141
• /
• 2001

그 동안 IT 아웃소싱에 관한 많은 연구성과에도 불구하고 아웃소싱 계약체결에 있어서 실무적으로 꼭 필요한 아웃소싱의 적정가격에 관한 연구는 매우 미진한 형편이다. 특히 아웃소싱 의뢰업체 입장에서의 적정가격결정 모형이나 사례를 찾아보기는 더욱 어려운 것이 현실이다. 아웃소싱 가격의 적정성은 공급업체 만이 아니 라 의뢰업체의 입장에서도 아웃소싱의 성패를 좌우하는 중요한 요건이다. 본 연구는 TCO 개념을 이용하여, IT 아웃소싱 의뢰업체의 입장에서, 적정 가격을 산정하는 모형을 실제 적용사례를 통해 제시한다. 본 연구는 아웃소싱을 하지 않을 경우의 총소요비용과 아웃소싱을 할 경우의 총소요비용을 비교하여 아웃소싱의 효과를 측정하고 계약가격의 적정성을 판단할 수 있도록 하고자 하였다. 본 연구를 통하여 제시한 TCO분석방법 및 결과는 아웃소싱을 준비하거나 계획중인 업체에게 자체적으로 아웃소싱 계약가격을 산출하고, 아웃소싱을 통한 비용절감항목을 판단하며, 계약가격을 비교할 수 있는 자료로 사용되어 지기를 기대한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.175-179
• /
• 2015

In this study, we propose Ti hole pattern structure on the transparent conductive oxide (TCO) less dye-sensitized solar cells (DSSCs) using the lift-off process to improve the low light transmittance and low efficiency caused by opaque Ti electrode. The formation of Ti hole patterns make it possible to move the dye adsorption and electrolyte. The DSSCs with Ti hole patterns showed a higher photoelectric conversion efficiency (PCE) than those with general structure by 11.1%. As a result, The Ti hole pattern structure can be improved to increase the light absorption of the dyes and PCE of the TCO-less DSSCs is also increased.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.461-474
• /
• 2020

Korea launched Geostationary Environmental Monitoring Satellite (GEMS), a UV/visible spectrometer that measure pollution gases on 18 February 2020. Because satellite retrieval is an ill-posed inverse solving process, the validation with ground-based measurements or other satellite measurements is essential to obtain reliable products. For this purpose, satellite-based OMI and OMPS total column ozone (TCO), and ground-based Pandora TCO in Busan and Seoul were selected for future GEMS validation. First of all, the goal of this study is to validate the ground ozone data using characteristics that satellite data provide coherent ozone measurements on a global basis, although satellite data have a larger error than the ground-based measurements. In the cross validation between Pandora and OMI TCO, we have found abnormal deviation in ozone time series from Pandora #29 observed in Seoul. This shows that it is possible to perform inverse validation of ground data using satellite data. Then OMPS TCO was compared with verified Pandora TCO. Both data shows a correlation coefficient of 0.97, an RMSE of less than 2 DU and the OMPS-Pandora relative mean difference of >4%. The result also shows the OMPS-Pandora relative mean difference with SZA, TCO, cross-track position and season have insignificant dependence on those variables.In addition, we showed that appropriate thresholds depending on the spatial resolution of each satellite sensor are required to eliminate the impact of the cloud on Pandora TCO.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.270-270
• /
• 2010

OLED device is one of the most attractive and alternative display components, which stems primarily from the self-emission, large intrinsic viewing angle, and fast switching speed. However, because of its relatively short history of development, much remains to be studied in terms of its basic device physics, manufacturing processes, and reliability etc. Especially among several issues, it should be noted that the device characteristics are very sensitive to the surface properties of transparent conducting oxide (TCO) electrode materials. In this study, we have investigated the performance of OLED devices as a function of sheet resistance and surface roughness of TCO thin films. For this purpose, ITO and IZO thin films were deposited by r. f. magnetron sputtering under various ambient gases (Ar, Ar+O2 and Ar+H2, respectively). The crystal structure and surface morphology were examined by using XRD and FESEM. Also, electrical and optical properties were Investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.196.1-196.1
• /
• 2016

TCO(Transparent Conducting Oxide) on flat glass is used in thin-film photovoltaic cell, flat-panel display. Nowadays, Corning(R) Willow Glass(R), known as flexible substrate, has attracted much attention due to its many advantages such as reliable roll-to-roll glass processing, high-quality flexible electronic devices, high temperature process. Also, it can be an alternative to flexible polymer substrates which have their poor stability and degradation of electrical and optical qualities. For application on willow glass, the flexibility, electrical, optical properties can be greatly influenced by the TCO thin film thickness due to the inherent characterization of thin film in nanoscale. It can be expected that while thick TCO layer causes poor transparency, its sheet resistance become low. Also, rarely reports were focusing on the influence of flexible properties by varying TCO thickness on flexible glass. Therefore, it is very important to optimize TCO thickness on flexible Willow glass. In this study, Ti-ZnO thin films, with different thickness varied from 0 nm to 50 nm, were deposited on the flexible willow glass by atomic layer deposition (ALD). The flexible, electrical and optical properties were investigated, respectively. Also, these properties of Ti-doped ZnO thin films were compared with un-doped ZnO thin film. Based on the results, when Ti-ZnO thin films thickness increased, resistivity decreased and then saturated; transmittance decreased. The Figure of Merit (FoM) and flexibility was the highest when Ti-ZnO thickness was 40nm. The flexible, electrical and optical properties of Ti-ZnO thin films were better than ZnO thin film at the same thickness.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.2
• /
• pp.55-71
• /
• 2017

Transparent Conductive Oxide (TCO), especially Indium Tin Oxide (ITO) films are almost prepared by DC magnetron sputtering because of the advantage of obtaining homogeneous large area coatings with high reproducibility. The purpose of this report is describe a detailed investigation of key factors dominating electrical and structural properties of sputtered ITO films. It was confirmed that crystallinity and electrical properties of ITO films were strongly depend on the sputtering pressure and kinetic energy of sputtered particles which are expected to have a close relation with the transport processes between target and substrate. And also, nodule formation on the ITO target was suppressed by both $CaCO_3$ addition and decreasing micro-pore in the target. On the other hand, we focused on the characteristics of amorphous TCO film to use as transparent electrode for various applications. To realize high thermoelectric performance, it was tried to control both high electrical conductivity and low thermal conductivity for the amorphous IZO:Sn films.