• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.11a
• /
• pp.85-89
• /
• 2002

Development of distributed simulation environment must be required in order to simulate the distributed models regionally and inter-operate with running simulations individually, Simulation based on DEVS formalism is difficult to simulate the distributed models. DEVS formalism is modeling methodology. To specify model, this formalism separates behavior and structure, therefore it is able to design complex model easily. HLA is standard framework of distribute simulation environment, It is defined to facilitate the interoperability and the reusability. RTI (Run Time Infrastructure) is software that provides common service to simulation systems and implementation of the HLA Interface Specification. Method of implementation is that modules cooperating with RTI are added to simulator on DEVS simulation environment. On the DEVS simulation environment (DEVS-Obj -C) that already developed, Highest class of abstract simulator uses service that RTI provide, then This environment is able to change DEVS model into Federate and run distribute simulation that inter-operates with the RTI. Because this distributed simulation environment includes convenience of modeling that obtains through the DEVS formalism and accompanies HLA standard, this environment make it possible to simulate with_ complex systems and heterogeneous simulations

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.25-31
• /
• 2015

PURPOSES: Implementation and verification of the simple linear cohesive viscoelastic contact model that can be used to simulate dynamic behavior of sticky aggregates. METHODS: The differential equations were derived and the initial conditions were determined to simulate a free falling ball with a sticky surface from a ground. To describe this behavior, a combination of linear contact model and a cohesive contact model was used. The general solution for the differential equation was used to verify the implemented linear cohesive viscoelastic API model in the DEM. Sensitivity analysis was also performed using the derived analytical solutions for several combinations of damping coefficients and cohesive coefficients. RESULTS : The numerical solution obtained using the DEM showed good agreement with the analytical solution for two extreme conditions. It was observed that the linear cohesive model can be successfully implemented with a linear spring in the DEM API for dynamic analysis of the aggregates. CONCLUSIONS: It can be concluded that the derived closed form solutions are applicable for the analysis of the rebounding behavior of sticky particles, and for verification of the implemented API model in the DEM. The assumption of underdamped condition for the viscous behavior of the particles seems to be reasonable. Several factors have to be additionally identified in order to develop an enhanced contact model for an asphalt mixture.

• Journal of Information Technology Services
• /
• v.4 no.2
• /
• pp.1-22
• /
• 2005

The object of this study is to elicit major success factors along with the phases of implementing the BPR in case of public corporations. To obtain the goal of this research, (1) this study reviews and integrates the major previous BPR studies and shows critical success factors of implementing BPR projects coincided with the characteristics of the public organizations. (2) This study has analyzed and arranged the details of BPR projects of public corporations in South Korea through the literature survey, the questionnaire and the interview. (3) This study classifies 40 critical success factors which were identified in existing studies into ones belonging to 3 phases of BPR projects implementation: Introduction Phase, Execution Phase and Stabilization Phase. (4) This study has tested the relation between critical success factors on each stage of BPR projects implementation and the performance variables. It has proven that there is the statistically significant correlation between the success factors and the performance. The findings of this study are thought not only to be useful as a practical guideline in carrying out BPR project Implementation but also to provide significant basis for constructing the theoretical framework of effective BPR project implementation strategy.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.127-130
• /
• 2004

This paper describes the design and implementation of a SNMP Agent for NG-SDH transmission system. One of the most important items in SDH network management is the information model that implements every function of SDH equipment at network level. Although the TMN framework of SDH information model has been defined quite well, CMIP constraints of a real implementation urge vendors to implement proprietary features, and make it more difficult to maintain an integrated view of multivendor SDH networks management. To solve these aspects, this work proposes SNMP information model that allows a simple view of NG-SDH network management.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.943-954
• /
• 2000

Fieldbus is the lowest level industrial network in the communication hierarchy of factory automation and distributed process control systems. Data generated from field devices are largely divided into three categories : time-critical, periodic and time-available data. Because these data share one fieldbus medium, it needs a method that allocates these data to the bandwidth-limited fieldbus medium. This paper introduces an implementation method of bandwidth allocation scheme on PROFIBUS. In order to implement bandwidth allocation scheme on PROFIBUS, the following functions need to be supplemented on the FDL(Fieldbus Datalink Layer) protocol: (i) separation of medium bandwidth into periodic and non-periodic intervals, (ii) synchronization of node timers over a local link. In order to examine the validity of bandwidth allocation scheme on PROFIBUS, this paper develops an experimental model of a network system. The results obtained from the experimental model show that the bandwidth allocation scheme satisfies the performance requirement of time-critical, periodic and time-available data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.541-547
• /
• 2006

With the new paradigm of ubiquitous in the developed computing technology, it is urgently necessary to research GIS fields centering around positioning techniques. The intention of this study is to propose implementation methods for integrating topographic and cadastral data. For this purpose an integrated data model is formed to coincide the graphic data of cadastral map with that of topographic map. As a result, the integrated data model could be built by harmonizing cadastral map with topographic map. We suggest data model for connecting with other information systems in the conditions of data uniformity and implementation. This data implementation models suggested in this research can provide a good reference for the future implementation of other systems. This results will be efficiently used as basis for practical use in ubiquitous environments of spatial informations.

• The Journal of Society for e-Business Studies
• /
• v.4 no.3
• /
• pp.95-118
• /
• 1999

There have been many research papers and practical implementations on the various EC(Electronic Commerce) aspects such as merchant system, security, payment gateway, legal and policy issues. However, it is very hard to find the systematic approaches and business process models from the viewpoint of the company willing to start B2C(Business-To-Customer) EC. Therefore, we develop business process models for the planning, systems analysis and design, implementation, and operation of internet shopping mall to suggest a guideline and reference model for the realization of successful B2C EC.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.491-512
• /
• 2004

The purpose of this paper is to analyze and compare the existing digital media asset management systems and develop a prospective implementation model. As a result of conducting this research, it is recommended that the prospective system consist of archiving server, processing server, and interface program. This result suggests important starting point for development a resonable and reliable implementation model for digital media asset management system.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.115-123
• /
• 2019

White-box cryptography is an implementation technique in order to protect secret keys of cryptographic algorithms in the white-box attack model, which is the setting that an adversary has full access to the implementation of the cryptographic algorithm and full control over their execution. This concept was introduced in 2002 by Chow et al., and since then, there have been many proposals for secure implementations. While there have been many approaches to construct a secure white-box implementation for the ciphers with SPN structures, there was no notable result about the white-box implementation for the block ciphers with Feistel structure after white-box DES implementation was broken. In this paper, we propose a secure white-box implementation for a block cipher SEED with Feistel structure, which can prevent the previous known attacks for white-box implementations. Our proposal is simple and practical: it is performed by only 3,376 table lookups during each execution and the total size of tables is 762.5 KB.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.265-273
• /
• 1995

This paper is to analyze and provide some managerial requirements for the successful implementation of total productive maintenance system. It tries to identify determining factors for success and reasons for the failures of TPM, based on the research of a survey and an empirical study through the years in Korea. The findings are such that many companies have not been engaged in planning and control the maintenance cost and their maintenance activities are not organized systematically. However, many indicators show that the number of finns which try to introduce and implement TPM is getting increased. The successful implementation of TPM depends largely on how top management perceives TPM and how the firm responds In the changes of organization and of the role of workers to adapt this new concept of work. It is required that TPM is perceived as a means to achieve the firm's business objectives. It is recommended that each company constructs and develops its own model and procedures to drive the effort for TPM implementation.