• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.401-410
• /
• 2008

Multiview Video Coding contains a macroblock-based illumination compensation tool which can compensate the variations of illuminations according to view or temporal directions. Thanks to illumination compensation tool, the coding efficiency of Multiview Video Coding has been enhanced. However illumination compensation tool also generates additional subjective drawbacks of the blocking artifacts due to macroblock-based compensations of mean values. A deblocking filtering method for Multiview Video Coding which is the same as in H.264/AVC does not consider illumination difference between the illumination compensated blocks, thus it can not effectively eliminate the blocking artifacts. Therefore, this paper analyzes the phenomena of blocking artifacts caused by illumination compensation and proposes a method which can effectively eliminate the blocking artifacts with the minimum changes of the H.264 deblockding filtering method. In the simulation results, it can be easily found the blocking artifacts are clearly eliminated in the subjective comparisons, and the average bit-rate reduction is up to 1.44%.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.63-74
• /
• 2007

Fast Fourier transform(FFT) is powerful, fast computation framework for convolution in many image restoration application. However, an actually observed image acquired with finite aperture of the acquisition device from the infinite background and it lost data outside the cropped region. Because of these the boundary artifacts are produced. This paper reviewed and summarized the up to date the techniques that have been applied to reduce of the boundary artifacts. Moreover, we propose a new block-based fast image restoration using combined extrapolation and edge-tapering without boundary artifacts with reduced computational loads. We apply edgetapering to the inner blocks because they contain outside information of boundary. And outer blocks use half-convolution extrapolation. For this process it is possible that fast image restoration without boundary artifacts.

• Journal of the Korean housing association
• /
• v.18 no.1
• /
• pp.53-60
• /
• 2007

Storytelling approach is the way to formulate and solve problems using stories. Story is a means to understand and react everyday life that can be regarded as multi-dimensional problems. The approach becomes popular in various fields in conjunction with digital technology. In particular, it is used to solve problems in relation to whole context. In design, storytelling approach is used to clarify design constraints. It can be used to clarify and communicate thoughts for design artifacts, and to understand how the artifacts might be used in particular circumstances. In particular, the approach is useful to use under uncertain circumstances. In architecture, storytelling approach can be used in the area of design generation, design critique and capturing design knowledge. In design generation, it can be used to describe and formulate design experiences rather than simple designing artifacts. The approach formalizes design based on stories of user experiences. Digital technology such as virtual reality can be used to experience designed spaces for design modifications. In design critique area, it can be used to fill uncertain facts for historical buildings as welt as different from present status. Such stories can be used to build digital modeling and used to open criticism. Stories can be used to formalize knowledge in architectural domain as a form of implicit knowledge for certain projects. In architecture, it often is required to design types of environment never experienced before as well as to accomodate fast changing technologies. Storytelling methodology can be used as a method to cope with uncertainty and complexity in design requirements along with accumulating design knowledge.

• Journal of the Korean Society of Costume
• /
• v.66 no.5
• /
• pp.149-162
• /
• 2016

This study examines the costume artifacts discovered in the burial site of Choi Kyung Sun(1561~1622), which was moved from Gangwon in Gangrung Province. About 30 artifacts, including costumes, were recovered from Choi Kyung Sun's grave. The collection of men's coats discovered in the grave consisted of a Dallyeong (Official's robe), Jing-nyeong(Man's coat), Jungchi-mak(Man's coat), Cheolrik(Man's coat), Chang-ui(Man's coat), Gwang-su-ju-ui(Man's coat), and Do-po(Man's coat). Han-sam(Undershirts), Jeo-go-ri(Jacket), and trousers were also recovered, along with several items made of textiles, such as the cloth used to shroud and wrap the body. The costume artifacts recovered from Choi Kyung Sun's grave have several characteristics that distinguish them from other early 17th-century costume artifacts. Firstly, the body had a hairband made from horsehair. Secondly, the men's trousers were of the type worn before the Japanese Invasion(1592~1597). Thirdly, the style of the coats' sleeves, when compared with artifacts from other regions, was from an earlier era. Through these costume artifacts, it can be inferred that people who lived in the Gangwon Province, which was far away from Seoul, continuously wore outfits from before the Japanese Invasion, and trends spread slowly.

• 보존과학연구
• /
• s.21
• /
• pp.177-206
• /
• 2000

In the study of iron artifacts, microstructure investigation is an indispensable step to find out the manufacturing method and skill. The iron weapons that we have excavated and investigated at the ruins of Gohyun Castle site, Hadong-gun, Kyungnam Province are traced to the era of Choson Dynasty. By sampling specimens of some artifacts, we have made microstructure investigation and component analysis of them. For microstructure investigation we used metallographic microscopes, and for component analysis we used the methods of C/S analysis and Inductively coupled plasma emission spectrometry (ICP) analysis which is designed to verify components and contenets of a very small amount elememt. Microstructure of the artifacts is mainly divided into three parts. Inner part is Widmanstatten, a typical overheated structure, upon which we can see another part with fine grains and with extremely small quantities of carbon. And on the surface, there is a carbonized part. When the shape is formed through forging process at a high temperature the carbon content of the surface is getting down and the grains come to be finer. Next, carbonizing process is to be done for hardening the surface, which is followed by cooling process. Cooling rates seem to be different from artifacts to artifacts. All artifacts have clearly distinguishable grain boundaries in their unique structure. Since this kind of structure is rarely found, it seems to offer a clue to find out the manufacturing method. The outcome of component analysis is almost the same with that of microstructure investigation. As is demonstrated by C/S analysis, carbon content is 0.39-1.24% and sulfur is contained 0.0005-0.010%.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.101-107
• /
• 2014

This study is proposed the novel PPG sensor device and the signal processing method to replace the acceleration sensor that is used to reject motion artifacts contained in photoplethysmography(PPG). The proposed method is to reject motion artifacts by an adaptive filter based on the estimated motion artifact by using a blue LED light. To evaluate the performance of the proposed method experimentally, We did design a novel sensor consisted of blue/red LEDs and photo-sensor and implemented, and then rejected the motion artifacts by using an adaptive filter and the implemented sensor. In the results of the experiments, it is shown that the proposed sensor device and signal processing can reconstruct the PPG signal despite the occurrence of motion artifacts, and also that the SNR was 4.5 times of moving average filter. According to the experimental results, the proposed method can be applied to design a low-cost device.

• Journal of Biomedical Engineering Research
• /
• v.35 no.5
• /
• pp.132-141
• /
• 2014

In an ordinary CT scan, a large number of projections with full field-of-view (FFOV) are necessary to reconstruct high resolution images. However, excessive x-ray dosage is a great concern in FFOV scan. Region-of-interest (ROI) CT or sparse-view CT is considered to be a solution to reduce x-ray dosage in CT scanning, but it suffers from bright-band artifacts or streak artifacts giving contrast anomaly in the reconstructed image. In this study, we propose an image reconstruction method to eliminate the bright-band artifacts and the streak artifacts simultaneously. In addition to the ROI scan for the interior projection data with relatively high sampling rate in the view direction, we get sparse-view exterior projection data with much lower sampling rate. Then, we reconstruct images by solving a constrained total variation (TV) minimization problem for the interior projection data, which is assisted by the exterior projection data in the compressed sensing (CS) framework. For the interior image reconstruction assisted by the exterior projection data, we implemented the proposed method which enforces dual data fidelity terms and a TV term. The proposed method has effectively suppressed the bright-band artifacts around the ROI boundary and the streak artifacts in the ROI image. We expect the proposed method can be used for low-dose CT scans based on limited x-ray exposure to a small ROI in the human body.

• Convergence Security Journal
• /
• v.23 no.3
• /
• pp.37-47
• /
• 2023

The growth of the metaverse has been accelerated by the increased demand for non-face-to-face interactions due to COVID-19 and advancements in technologies such as blockchain and NFTs. However, with the emergence of various metaverse platforms and the corresponding rise in users, criminal cases such as ransomware attacks, copyright infringements, and sexual offenses have occurred within the metaverse. Consequently, the need for artifacts that can be utilized as digital evidence within metaverse systems has increased. However, there is a lack of information about artifacts that can be used as digital evidence. Furthermore, metaverse security evaluation and forensic analysis are also insufficient, and the absence of attack scenarios and related guidelines makes forensics challenging. To address these issues, this paper presents artifacts that can be used for user behavior analysis and timeline analysis through dynamic analysis of Roblox, a representative metaverse gaming solution. Based on analyzing interrelationship between identified artifacts through memory forensics and log file analysis, this paper suggests the potential usability of artifacts in metaverse crime scenarios. Moreover, it proposes improvements by analyzing the current legal and regulatory aspects to address institutional deficiencies.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.333-344
• /
• 2011

Cleaning of foreign matter and corrosion products on surface among conservation treatment of iron artifacts is an important part for looking up a original form. The sand blaster is the most popular equipment when it removes the foreign matter and corrosion products on iron artifacts surface. Current foreign matter and corrosion products equipment, which mostly uses, is sand blaster. Glass dust which sprayed from sand blaster is harmful and causing environmental pollution. In order to solve these problems, we investigated the $CO_2$ snow cleaning that use a eco-friendly equipment to apply for cleaning foreign matter and corrosion products on surface of iron artifacts. It examined by using sand blaster and $CO_2$ snow cleaning to aged steel coupon and iron artifacts. In case of aged steel coupon, the result showed that the sand blaster and $CO_2$ snow cleaning methods were similar to the degrees of cleaning foreign matter and corrosion products, through surface roughness, color measurement and SEM. $CO_2$ snow cleaning applied to aged steel coupons weren't worn out the surface in comparison with sand blaster by SEM. When applied to the iron artifacts, power nozzle of the $CO_2$ snow cleaning was an excellent cleaning effect that surface wern't worn out in comparison with sand blaster. And, it showed that internal structure change of metal was no found before and after cleaning by X-ray radiography. Consequently, we confirmed that cleaning of the sand blaster and power nozzle of $CO_2$ snow cleaning were similar to the effect. But, it's very careful to use this method because of high outlet pressure of power nozzle for applying to the iron artifacts. As a result of experiments, it could be found that the cleaning methods should be selected depending on internal state of the artifacts.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.117-126
• /
• 2010

In order to obtain more clear x-ray images, an antiscatter grid, which can absorb the scattered rays, is employed. In the high-resolution direct digital radiography, however, the artifacts due to the grid are visible. In this paper, the grid artifacts are reduced by applying simple 1-dimensional low-pass filters in the spatial domain based on the rotated grid. Since the proposed algorithm does not use any detection scheme for the artifact frequencies and discrete Fourier transforms for 2-dimensional filters, it can simply and fast reduce the grid artifacts. The performance using the order 1 average filter is compatible to that of using 2-dimensional filters in the frequency domain.