• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.283-284
• /
• 2023

Green remodeling of pubic buildings for improving indoor environment and reducing energy consumption is increasingly promoted. The objective of this study is to measure and analyze for wall's thermal performance, thermal transmittance, of existing buildings. The method of this present study refered the ISO 9869-1 and is to measured heat flow, surface temperature of wall, and in/outdoor temperature over 7 days. And it was compared the calculated thermal transmittance with measured one. The measured wall's thermal transmittance value is about two times than the calculated thermal transmittance value.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.203-211
• /
• 2021

Recently, the insulaton design standards for reducing the energy use of buildings have been strengthened. Althoug insulation work is the most cost-effective method for reducing the primary energy consumption per unit area of a building, there are no evaluation criteria for insulation performance at the time of construction and completion inspection. The purpose of this study is to provide objective data by establishing a standard for an analysis method and a method for easily experimenting with the exterior wall thermal transmittance of an apartment house using a thermal transmittance measuring device(TESTO 435). For the exterior wall of the test subject, the specific heat per unit area exceeded 20kJ/(m²·K), and the data at the end point suitable for ISO 9869-1 were analyzed by the average method. The measured values of the thermal transmittance for 3 consecutive days converged within +5% of the desing value, and the standard deviation of the thermal transmittance by day decreased in the order of 1-Day > 3-Day > 2-Day. The standard deviation of the thermal transmittance by time period decreased in the order of 00:00~24:00 < 19:00~07:00 < 00:00~07:00. The measured value of the thermal transmittance for the time perion of 00:00 to 07:00 per day almost coincided with an error of -3% to + 2% compare to the desing value.

• KIEAE Journal
• /
• v.17 no.4
• /
• pp.41-48
• /
• 2017

Purpose : Currently, 25% of the domestic energy consumption structure is used as building energy, and more than 18% of this energy is consumed in the residential. Accordingly, various efforts and policies that can save energy of the building is being performed. The various researchers are conducting research to diagnose the thermal performance of existing buildings. This study is to apply in the field of precision thermal insulation performance diagnostic method for thermal performance analysis of existing detached house in Seoul, Gangreung, Gyeongju, Pohang. And this paper is analyzed quantitatively measure the existing detached house energy performance. Method: Research methodology analyzed the thermal performance over the Heat Flow Meter method by applying the measurement process and method by applying the criteria of ISO 9869-1 & ASTR method. In this study, the surface heat transfer coefficient was calibrated by applying indoor surface heat transfer resistance with reference to ISO 6946 standard. The measurement error rate between the HFM diagnosis method and the ASTR diagnosis method was reduced and the measurement reliability was obtained through measurement method error verification. Result : As a result of the study, the thermal performance vulnerable parts of the building were quantitatively analyzed, and presented for methods which can be improved capable of efficient energy use buildings.

• KIEAE Journal
• /
• v.16 no.4
• /
• pp.71-77
• /
• 2016

Purpose : The energy saving in a residential building (apartment) sector is known as one of the effective solution of energy reduction. In South Korea, the government has recently reinforced regulations associated with the energy performance of buildings. However, there is a lack of research on the methods for the energy performance diagnosis that is used to analyze the wall thermal performance of the existing apartments. Because a reliable diagnosis is necessary to save the building energy, this study analyzed wall thermal performance of an existing apartment in Seoul. Method : This paper applied two methods for analysis of the thermal insulation performance; HFM(Heat Flow Meter) method and ASTR(Air-Surface Temperature Ratio) method. The HFM method is suggested by ISO9869-1 code to measure the thermal performance. The ASTR method is proposed by this study for the simplified In-situ measurement and it uses three temperature data (interior wall surface, interior and exterior air) and the overall heat transfer coefficient. This study conducted the experiment of an existing apartment in Seoul using these methods and analyzed the results. Furthermore, the energy simulation tool of the building was used to suggest retrofit of the building based on the results of measurements. Result : The error rate of HFM method and ASTR method was analyzed in about 17 to 20%. As the results of comparison between the initial design values of the wall and the measured values, the 26% degradation of insulation thermal performance was measured. Lastly, the energy simulation tool of the building shows 10.8% energy savings in accordance with the construction of suggested retrofit.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.426-426
• /
• 2022

하천에서 유사량은 침식(Erosion), 유송(Transport), 퇴적(Deposition)의 3단계 과정으로 진행되며 이 과정에서 다양한 유사 문제가 수반되고 있다. 특히, 하상변동의 예측, 하천계획 수립 등 수자원 개발을 위해 유사량 조사는 반드시 필요하다. 따라서 국외에서는 오래전부터 하천 유사이송과정에 대한 이론적인 개념을 정립하고 양질의 유사량 자료를 위해 연구해 오고 있다. 국내에서는 대표적으로 한국수자원조사기술원에서 유사량조사 업무를 수행하고 있으며 국가유사량관측망 중 매년 약 20개소~30개소의 지점을 대상으로 신뢰성 있는 자료를 만들기 위해 지속적으로 연구하고 있다. 유사량 조사의 항목 중 부유사 채취를 위한 측선수는 하천 폭(ISO 기준)에 따라 5개~7개의 측선에서 부유사를 채취하고 있으며, 강우가 활발한 홍수기 전, 후로 단면측량 및 하상토 자료를 통해 총유사량을 산정하고 있다. 본 연구의 분석방법으로는 이신재(2021)가 제안한 방법을 착안하였고, 측선별 부유사농도와 평균부유사농도의 비교분석 통해 상관계수(R²)가 가장 높은 측선을 선택하여 지표부유사량(Index Suspended Sediment) 산정에 활용하였다. 대상지점으로는 연속 유사량 자료 생산이 가능한 낙동강유역의 함안군(계내리) 관측소와 영산강유역의 구례군(구례교) 관측소를 선정하였다. 먼저, 지표 유사량은 평균부유사농도와 측선별 부유사농도를 비교분석하였으며, 함안군(계내리) 관측소는 5번 측선(R²=0.9869), 구례군(구례교) 관측소는 2번 측선(R²=0.9929)을 통해 지표부유사량을 산정하였다. 그 결과 하천특성에 따라 측정된 부유사량과 지표부유사량의 편차율(함안군(계내리) : 최대 33%, 최소 1%, 구례군(구례교) : 최대 25%, 최소 1%)이 다소 상이한 구간이 발생하였지만 이들의 상관계수(R²)는 각각 0.9922, 0.9947로 매우 높게 산정되었다. 이러한 결과를 통해 제시한 지표 설정은 실제 업무에서 활용 가능할 것으로 판단되며, 추후 과거년도의 하천특성과 수리특성 분석을 통해 해당지점의 대표적인 측선을 선정해 연속적인 지표 유사량 자료 생산이 가능하다면 향후 자동 유사량 채수장치 설치를 통해 안정된 유사량 자료 제공이 가능할 것으로 기대된다.