• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.70-80
• /
• 2008

This paper presents comparison of 18000-3 ASK and PJM mode RFID in terms of reading speed. This is accomplished by counting the occurrences of a few representative blocks which constitute the reader / tag interactions for each mode. To apply FS (frame slotted)-aloha protocol, four Q-algorithms, which are a Q-algorithm suggested in the standard document, a fixed Q-algorithm, a minimum Q-algorithm and the number of tag dependent Q-algorithm, are used. Through some simulations, we present the reading speed of each mode with respect to the Q-algorithm and the comparison of the reading speed between the two modes for each Q-algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1419-1435
• /
• 2015

In this study an active RFID system of low power consumption is proposed, for which we improved the tag collection algorithm of ISO/IEC 18000-7 standard and significantly reduced the tag collection time. We classified the type of power consumption according to the operating mode of active RFID and proposed the method which can accurately estimate battery life time. By calculating the power consumptions of proposed and current methods, we can compare the battery life times of both methods. Through this analysis we can demonstrate the superiority of the proposed method in battery life time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.731-736
• /
• 2017

In this paper, we propose a simplified tag collection algorithm to improve the performances of ISO/IEC 18000-7, which is a standard for an active RFID system. The proposed algorithm modifies the collection command that enables to start a tag collection round. The modified collection command includes the results of the listen period response for the previous collection round. Tags that receive the collection command check the collision status for their responses. If there is no collision, tags transmit their additional data and go into the sleep mode without the point-to-point read command and sleep command. A collection round for the standard consists of a collection command and response, a read command and response, and sleep command. On the other hand, in the proposed algorithm, a collection round consists of a collection command and response. The simulation results showed that the proposed algorithm can improve the identification delay about 16% compared with the standard when the number of tags are 300.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.199-206
• /
• 2013

This paper proposes a modified tag collection algorithm that improves the drawback of the identified slot scan-based tag collection algorithm presented in a previous paper to improve the tag collection performance in active RFID systems. The previous identified slot scan-based tag collection algorithm is optimized in situations where all the tags store the fixed size of data, so it could not result in a good performance improvement with tags having the variable size of data. The improved tag collection algorithm proposed in this paper first collects the slot size information required for the data transmission from each tag via the identified slot scan phase, and then performs the tag collection phase using the information, which resolves the problem of the previous identified slot scan-based tag collection algorithm. The simulation results for performance evaluation showed that the proposed tag collection algorithm resulted in the almost same tag collection performance as the previous algorithm when all the tags have the same size of data and led a large improvement of the tag collection performance in ISO/IEC 18000-7 unlike the previous algorithm when each tag has a random size of data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.518-527
• /
• 2008

Tag collection is one of the major functions in Radio Frequency Identification (RFID) systems. IS0/IEC 18000-7 defines the tag collection algorithm using the anti-collision algorithm, based on the framed slotted ALOHA for active RFID systems. However, it has inefficiency problems that reduce tag collection performance by deciding non-optimum slot size or using point-to-point commands to put collected tags to sleep. In this paper, we propose two mechanisms to overcome the inefficiency problems and improve tag collection performance: 1) a new slot size decision mechanism to allow the reader to choose the optimum slot size flexibly and 2) a broadcast-based sleep mechanism to put collected tags to sleep effectively. We also implemented an active RFID system, composed of an active RFID reader and multiple tags, and the reader is designed to maximize tag collection performance when the proposed mechanisms are applied. In experiments, we evaluated the tag collection performance using one reader and 50 tags in the real-world environment. The experimental results show that when two mechanisms are applied and the initial number of slots is chosen appropriately, the performance of the proposed tag collection algorithm is greatly enhanced, compared with that of the standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.598-605
• /
• 2014

In this paper, we suggest a modified slotted ALOHA algorithm for fast tag collection in active RFID system and implement the reader and tag operation using CC2530 chip of Texas Instruments Co. to prove the performance of the proposed algorithm. In the present international standard related with active RFID including ISO/IEC 18000-7 the reader sends sleep command to each tag after successful obtaining tag's information. Meanwhile, in this paper, the tags decide to sleep after checking the second command from the reader resulting in enormously decreased tag collection time. We tested the proposed algorithm with 30 tags over the range of 0-3m and the results showed that the tag collection process was completed in 400msec at average. And 30 tags are collected in one second with 99.7% and the collection rate is 100% in 2m distance between reader and tag. The collection rates are 99.94% and 99.7% for distance 2.5m and 3m, respectively. The average collection rate is 99.91% over all range and it is concluded that the proposed algorithm is enough to apply to real fields.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.413-420
• /
• 2006

In this thesis, a RFID baseband system is implemented based on the international standard ISO/IEC 18000-6 Type-B using FPCA, and also anti-collision algorithm is implemented to improve the system performance. We compares the performance of the proposed anti-collision algorithm with that binary tree algorithm and bit-by-bit algorithm, and also validated analytic results using OPNET simulation. The proposed algorithm for Type-B transmission protocol and collision prohibition was designed using ISE7.1i which is a FPGA design-tool of Xilinx and implemented with Spartan2 chip which is a FPGA device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1569-1580
• /
• 2016

For the 2.4 GHz active RFID to be successful in the market, one of the requirements is the increased battery life. However, currently we do not have any accurate power consumption estimation method. In this study we develop a simulation model, which can be used to estimate power consumption of tag accurately. Six different simulation models are proposed depending on collision algorithm and query command method. To improve estimation accuracy, we classify tag operating modes as the wake-up receive, UHF receive, sleep timer, tag response, and sleep modes. Power consumption and operating time are identified according to the tag operating mode. Query command for simplifying collection and ack command procedure and newly developed collision control algorithm are used in the simulation. Other performance measures such as throughput, recognition time for multi-tags, tag recognition rate including power consumption are compared with those from the current standard ISO/IEC 18000-7.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1272-1282
• /
• 2009

This paper consists of two parts: the protocol for tag-to-tag mesh network and the implementation of dual-radio RFID system. Recently, RFID has been adopted in ports or warehouse, being attached to containers and palettes for loading/unloading automation. However, the RFID system has encountered one problem - some tags cannot receive any command from reader intermittently due to signal interference by containers or field equipments (e. g. cranes and yard tractors). This area where reader signal cannot reach is called dead-zone. The proposed method for solving the dead-zone problem is as follows. A zone which can be communicated directly between readers and tags communicates in 433MHz frequency band in compliance with ISO/IEC 18000-7 standard. On the other hand, dead-zone communicates in 2.4GHz frequency band by using tag-to-tag mesh network in compliance with IEEE 802.15.4 standard. The proposed method can not only save much cost to install additional readers but also help resolve the dead-zone problem. Furthermore, it can provide the easier, faster, and more economical network infrastructure.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.95-98
• /
• 2009

RFID(Radio Frequency IDentification) technology is an automatic identification method using radio frequencies between RFID reader which collects the informatin and tag which transmits the information. RFID technology develops passive RFID which transmit the only ID to active RFID which transmit the additional information such as sensing information. there is ISO/IEC 18000-7 as typical standard of active RFID. it is single channel system of 433.92MHz and has limitation of collection of a number of tags. to overcome limitation of collection of many tags, we propose the new 2.4GHz active RFID technology which can use the multi-channel. if reader has multi-interface and uses another channel in each, reader could fast collect the tags. but, if a reader which has many interfaces collects tags through the specific interface, the performance may not improve any more comparing with a reader using single interface. in this paper, we show the fast collection through design and implementation of protocol for load balancing between interfaces in multi-interface RFID reader.