• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.11a
• /
• pp.531-535
• /
• 2001

인터넷에서 가상현실 기법의 도입은 인터넷의 범용성과 함께 사용자가 쉽게 접할 수 있고 다양한 정보를 획득할 수 있기 때문에 지속적으로 발전해 가고 있다. VRML은 이러한 인터넷에서 가상세계를 구현하는 표준언어로 자리잡고 있다. 본 연구에서는 현재 많이 활용되고있는 VRML 저작툴인 ISA(Internet Scene Assembler)와 ISB(Internet Scene Builder)를 이용해 가상신호등 시스템을 설계하고 구현하는 것이 목적이다. 가상 신호등 시스템의 시뮬레이션을 위해 애니메이션 기법과 Sensor Node 및 Time_Bool_Converter 등의 Logic 함수를 사용하게 되고, Routing Diagram의 연결을 통해 시뮬레이션을 제작하게 된다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.20-40
• /
• 1996

The oil in water type ME of 4 component system was composed with POE monoalkyl ether and POE sorbitan monoalkyl ester as surfactant, saturated hydrocarbon, side chain structure and aromatic structure as oil, and glycerine as cosurfactant using high pressure homogenizer. The objective of this study was to examine the role of surfactant and oil structure on droplet size and stability. The experimental results showed that the droplet size was smaller with bigger polarity of oil, less hydrocarbon, longer hydrophilic chain of surfactant and higher concentration of glycerine. SQ and LP systems showed very stable but AB and ISB system unstable microemulsion.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.339-347
• /
• 1996

Mechanical properties(flexural strength hardness fracture toughness) of alumina ceramics were evaluated. Alumina products of four companies were selected and three of those were made in Korea and one of those was made in Japan. The large differences according to manufacturing companies had resulted from flexural strength and weibull modulus which had a wide ranges of 300 to 400 MPa and 5 to 15 respectively. Critical indenstation load which could be neglected the effect of elastic recovery was about 9.8N and Vickers' hardness were about 15 GPa. Fracture toughnesses were evaluated by IF and ISB method. It was more preferable to the average at one indentation load that fracture toughness were obtained from the slope of the relationship between indentation load and crack length in IF method and between indentation load and fracture load in ISB method and fracture toughness was about 4 MPa·m1/2.

• The Korean Journal of Pain
• /
• v.10 no.2
• /
• pp.166-169
• /
• 1997

Background: We have noted a high incidence of vasovagal episodes associated with use of interscalene block(ISB) for shoulder arthroscopy in the sitting position. The purpose of this retrospective study is to alert the possibility of potentially dangerous vasovagal events, describe the characteristics of this problem, and propose therapeutic devices. Methods: Results 62 patients who underwent shoulder arthroscopy in the sitting position with ISB were retrospectively analyzed. Group 1, 10 patients experienced vasovagal events characterized by sudden hypotension and bradycardia. Remaining 52 patients, Group 2, did not experience these symptoms. All patient charts were reviewed for age, sex, side of surgery, premedication, preoperative fluid and intraoperative medications. Perioperative hemodynamic changes were also compared between the two groups. Results: Vasovagal events experienced in 16% of patients(10/62) and occurred $39{\pm}18$ min after sitting position and $22{\pm}18$ min after start of operation. Number of patients who receiving anticholinergics for premedication were significantly lower in Group 1 than Group 2(2/10 vs. 28/52, p<0.05). Conclusions: Bezold-parish reflex is a potential mechanism for sudden hypotension and bradycardia which can occur during shoulder arthroscopy in sitting position. Therefore anticholinergic pretreatment and meticulous monitoring during operation are recommended to prevent B-J reflex.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.999-1008
• /
• 2012

Unlike the existing CMOS chip, ISB (Intelligent Silicon Bead) is new concept biochip equipped with optical communication and memory function. It uses the light for power of SoC CMOS and interface with external devices therefore it is possible to miniaturize a chip size and lower the cost. This paper introduces an input protocol and a design of the low power and the low area to transfer the power and the signal through a single optical signal applied from external reader device to bead chip at the same time. It is also verified through simulation and measurement. In addition, low-power PROM is designed for recording and storing ID of a chip and it is successful in obtaining the value of output according to the optical input. Through this study, a new type biochip development can be expected by solving high cost and a limit of miniaturizing a chip area problem of an existing RFID.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.49-54
• /
• 2005

Inner Structured and Bonded(ISB) panel, a kind of metallic sandwich panel, consists of two thin skin plates bonded to a micro-patterned inner structure. Its overall thickness is $1\~3mm$and it has attractive properties such as ultra-lightweight, high efficiency in stiffness-to-weight and strength-to-weight ratio. In many previous studies, resistance welding, brazing and adhesive bonding are studied for joining the panel. However these methods did not consider productivity, but focused on structural characteristics of joined panels, so that the joining process is very complicated and expensive. In this paper, a new joining process with resistance welding is developed. Curved surface electrodes are used to consider the productivity and the stopper is used between electrodes during welding time to maintain the shape of inner structure. Welding time, gap of electrodes and distance between welding points are selected as the process parameters. By measuring the tensile load with respect to the variation of welding time and gap of electrodes, proper welding conditions are studied. Welding time is proper between 1.5-2.5cycle. If welding time is too long, then inner structures are damaged by overheating. Gap of electrode should be shorter than threshold value fur joint strength, when total thickness of inner structure and skin plate is 3.3mm, the threshold distance is 3.0mm.

• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.443-447
• /
• 2005

Fracture behavior was investigated in the $Al_2O_3-TiO_2(3 wt{\%})-LaPO_4(25 wt{\%}$) composite ceramics. To improve the fracture toughness of alumina ceramics, $TiO_2$ and $LaPO_4$ as a second phase were introduced. The samples were made by conventional powder processing method. Green compacts were sintered at $1600^{\circ}C$ for 2 h in air. Fracture toughness was tested using Indentation Strength Bending(ISB) method. From the bending test, enhanced fracture toughness was found in the composite, compared to the pure and $TiO_2$-doped alumina. The main factor of the enhancement of fracture toughness seems to be attributed to the weak interphase role of the $LaPO_4$ as a particulate type.

• International Journal of Fluid Machinery and Systems
• /
• v.1 no.1
• /
• pp.121-139
• /
• 2008

For mechanical drive steam turbines, the investigation results of corrosion fatigue phenomena in the transient zone are introduced, including basic phenomena on expansion line and actual design and damage experience. These results were analyzed from the standpoint of stress intensity during the start of cracking. In order to resolve such problems, preventive coating and blade design methods against fouling and corrosive environments are developed. Detailed evaluation test results are given for coating performance using a unique test procedure simulating fouling phenomena and washing conditions. Finally, the results of the successful modification of internals and on-line washing results on site are introduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.64-64
• /
• 2004

최근 복합재료, 신소재 등 다양한 방법을 통해 빔(beam), 바(bar), 패널(panel) 등 초경량 구조재료가 개발되고 있다. 이중 금속 내부구조재를 가진 접합판재(Inner Structured and Bonded panel, ISB panel)은 3차원 형상의 내부구조재가 강성 및 강도를 증가시키는 반면, 부피의 대부분이 비어있어 비강도 및 비강성을 크게 개선시킨다 일반적으로 다양한 트러스 형태의 금속 내부구조물은 허니컴 형상의 내부구조와 유사한 정도로 기계적 특성이 우수하다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.53-53
• /
• 2004

최근 자동차/항공기 등의 판재나 구조물을 첨단기능성 재료로 제작하여 연료소비량을 감소시키는 동시에 승객의 안정성을 현저히 향상시키는 초경량/고강도/고강성/고내충격성 재료에 대한 연구가 활발히 수행되고 있다. 국내에서는 두개의 금속 박판사이에 3차원 금속 구조체를 대면적에 분포시킨 후, 판재와 구조체를 접합하여 재료의 무게를 현저히 감소시키는 반면 강도/강성/내충격성을 향상시키는 ISB(Internally Structured Bonded)판재 개발에 대한 연구가 시작되고 있다.(중략)