• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.549-554
• /
• 2001

The authors have proposed that waste glass, which is crushed to pieces, can be used as a concrete aggregate. At the present time, recycled-glass concrete is used for sidewalk concrete blocks and pavement as glass is ornamental. However, in cases where recycled-glass concrete is used for structural concrete, strength and durability are required as structural concrete is exposed to the weather. Glass that is used generally is a mixture of SiO$_2$, Na$_2$O and CaO. SiO$_2$is the most likely cause of alkali-aggregate reaction when waste glass was used for concrete aggregate. In this study, an alkali-aggregate reaction test that is one of the important tests related to durability of aggregate was carried out far discussion of utilization of waste glass for concrete aggregate. From the results of the tests, it is found that glass is a reactive aggregate. The pessimum proportion of glass is about 75%. Then the cases of using fly ash, blast furnace slag and artificial zeolite for admixture materials were also examined for the purpose of prevention of alkali-aggregate reaction. from the results of the test, it was found that using them is an effective way to prevent alkali-aggregate reaction. The compressive strength in the cases of using admixture materials is larger than that without admixture materials.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.737-740
• /
• 2003

In this study, the influence of cement factor on the early strength gain and the other properties of concrete is discussed. According to the result, the setting time is faster in order of alumina cement(AC), high-early-strength cement(HSC) and ordinary Portland cement(OPC), and when OPC are replaced with HSC and AC, the final setting time is faster than when only OPC is used. At 10% replacement of AC, the instant setting happens. As the particle of cement is minute, setting time is shortened. As the properties of hardened concrete, the time when compressive strength of 5㎫, which the form can be removed, is gained is about 18 and 16 hours in the case of OPC and HSC respectively, and in the case of AC, it is about 5 hours. It also shows 16 hours at the replacing ratio of HSC of 50%, and 26 and 72 hours at the replacing ratio of AC of 5 and 10% respectively. And it shows 21, 16 and 12 hours with variation of fineness of cement, so early strength gain is fast with an increase of fineness. The coefficient of correlation between compressive strength and the rebound value is over 0.97, is very favorable. Therefore, if the rebound value of P type Schmidt hammer is more than 25, it is thought that the side forms can be removed.

• The Korean Journal of Community Living Science
• /
• v.14 no.2
• /
• pp.119-124
• /
• 2003

To increase the utilization of the Allium fistulosum L., the main crop of Jindo-kun, Jennam, Korea, the study about the way of process utilization is carried. The condition of swelling volume of mixing wheat flour and Allium fistulosum L flour is similar to 7.5% of the drying Allium fistulosum L. flour, and 25% of the raw Allium fistulosum L flour is similar to the bread made with just wheat flour. In the texture of mixing wheat flour and Allium fistulosum L., the hardness, adhesion, gumminess and tough chewiness is higher, as the rate of mixing drying Allium fistulosum L. is higher. There is no wide difference in 7.5% to 25% but it is higher in more than 20%. The color of bread mixed with Allium fistulosum L. is green-yellow. The more the mixing quantity is, the darker as we con see. The taste of bread mixed with Allium fistulosum L. is evaluated to 7.5% better than normal one in color, taste and smell and that of the bread mixed with raw Allium fistulosum L. is to 25% betterthan normal one in color, taste and smell. Mixed wheat flour and dryed Allium fistulosum L. flour is 5%, and raw Allium fistulosum L. is 15%. As a result, the bread mixed with Allium fistulosum L. is evaluated as the best.

• Korean Management Science Review
• /
• v.19 no.1
• /
• pp.197-224
• /
• 2002

Our study focuses on the implementation of IS development methodology as the innovation of IS organization. We have two main research objectives. We Intend to understand the critical factors affecting the implementation process of IS methodology. We also intend to deeply analyze the relationship among the implementation processes of methodology. The whole innovation process is divided into detailed four levels tilth dynamic and evolving Point of clew a cognition level, an adoption level, an acceptance level and an usage level. The results of our study are as follows. The main factors affecting initiation level of the IS methodology are the innovativeness of IS members, the existence of champion manager, training, the existence of IS performance gap, executive supports for IS organization, and the relative advantage of IS development methodology At the Implementation level, It is understood that the existence of champion manager executive supports, training and the relative advantage of innovation are the main factors. However, the complexity of Innovation is a megative factor about the quality of accepting and using the methodology In Innovation process. In performing the Innovation process, the Previous level gives very notable affection to the continuous next level. However it's also understood that positive attitude of adoption level does not directly affect the quality of using Innovation. Therefore, IS managers must pay attention to manacle each level of the Innovation Process to successfully accomplish the Implementation of IS methodology.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.17 no.3
• /
• pp.27-46
• /
• 1992

This paper considers an (r, Q) policy for operation of a multipurpose facility. It is assumed that whenever the inventory level falls below r, the model starts to produce the fixed amount of Q. The facility can be utilized for extra production during idle periods, that is, when the inventory level is still greater than r right after a main production operation is terminated or an extra production operation is finished. But, whenever the facility is in operation for an extra production, the operation can not be terminated for the main production even though the inventory level falls below r. In the model, the demand for the product is assumed to arrive according to a compound Poisson process and the processing time required to produce a product is assumed to follow an arbitary distribution. Similarly, the orders for the extra production is assumed to accur in a Poisson process are the extra production processing time is assumed to follow an arbitrary distribution. It is further assumed that unsatisfied demands are backordered and the expected comulative amount of demands is less than that of production during each production period. Under a cost structure which includes a setup/ production cost, a linear holding cost, a linear backorder cost, a linear extra production lost sale cost, and a linear extra production profit, an expression for the expected cost per unit time for a given (r, Q) policy is obtained, and using a convex property of the cost function, a procedure to find the optimal (r, Q) policy is presented.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.2
• /
• pp.133-138
• /
• 2010

The purpose of this study was to survey and test quality control of mammography system. The conclusion of this study is as follows ; First, The rate of pass for phantom image test shows that Film-Screen mammography system(F/S) and computed mammography system(CR) is 80%, Indirect digital mammography system(DR) is 100%. Second, The test of exposure dose shows that F/S is 921 mR. CR is 1,140 mR, DR is 474 mR. The grade of this testament is CR > F/S > DR. Third, The test of average glandular dose shows that F/S is 1,336 mGy, CR is 1,635 mGy, DR is 1,26 mGy. The grade of this testament is CR > F/S > DR. Fourth, The testament of resolution shows as follows F/S is 11~13 Lp/mm, CR is 4~5 Lp/mm, and DR is 5~7 Lp/mm(F/S > DR > CR) Fifth, The survey of projection, cassette, development and reading shows that user are indifference.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.4
• /
• pp.553-558
• /
• 2010

Nutrient and Blood are really common conceptions in Traditional Korean Medicine(TKM). However, those are used in mixed. not only because of their common points but users who doesn't have clear classifications between them. Therefore, I will explain those owns by explaining origins, places of origons, pathway, circulations, organs related to them and color. In addition, I will try to explain thi things in common without conceptions of their own. As a result, the first, nutrient is what is originated from water and food at middle energizer and circulated in meridian vessel by control of spleen. The second, blood is what is originated from qi of water and food and circulated in blood vessel by control of heart and its color is red. The third, nutrient blood is what is originated from water and food or qi of water and food and circulated in meridian or blood vessel by control of spleen and heart. Also it is red and its function is nourishing human body. The name of Nutrient blood is a new term that I made and it is different from nutrient or blood. Also it is different from nutrient and blood. Nutrient blood is combination by conceptions, nutrient and blood is combination by word itself.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1995.06b
• /
• pp.1-19
• /
• 1995

The plasmid pJEL 101 contains a highly repetitive element from the genome of Xanthomonas oryae pv. oryzae that has properties of an insertional element. The insertional nature of the element, hereto referred to as IS203, was confirmed by molecular analyses of the element and three related elements that were isolated from X. oryzae. The related sequences were isolated on the basis of transposition to the transposon-trapping vector pL3SAC and hybridization with pJEL101. The trapped elements (IS203a, IS203b, and IS203c) were each composed of 1,055 base pairs with 25 base terminal inverted repeats. The elements caused a three base pair target site duplication at the site of insertion in the sacRB gene. The sequence of pJEL 101 has 96% base pair identity with IS203a and 99% identity with IS203a and IS203c but lacks three nucleotides of the consensus left terminal repeat. IS203b has the same DNA sequences as IS203c but is inserted ito the sacRB gene in the opposite orientation. The longest open reading frame of IS203a could code for a protein of 318 amino acids and molecular weight of 37, 151. A search of the Genbank database revealed that IS203 has 51% identity with 909 nucleotides of IS4551 from Escherichia coli. The predicted protein of ORF1 has 40% and 30% amino acid identity to the ORF1 of Tn4551 and the transposase of IS30, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.672-675
• /
• 2006

It is becoming more significant to develop a rotary VCM type actuator for small form factor ODD, as portables are getting more and more popularized nowadays. In this paper, the procedure of development of the actuator which is applicable to compact flash II card and is fit in the specification of BD 1X is explained. This is based on the rotary VCM type actuator, which is good for reducing thickness. Air core solenoid coil is used in order to do focusing mechanism. And the total weight is reduced by using the structure of steel-aluminium-steel triple layer, so, the stiffness is still adequate. Additionally, the tracking coil is moved next to the actuator, so the total length was reduced, then the actuator become applicable to compact flash II card. The force of Magnetic Circuit is improved by using Magnetic Circuit DOE. And flexible mode frequency improved through the DOE of structure part. Modeling was exactly done in consideration of air core solenoid coil and pivot bearing. It is confirmed that the designed model is satisfied with the specification of BD 1X and is applicable to Compact Flash II card.

• Journal of the Korean Society for Library and Information Science
• /
• v.6
• /
• pp.87-103
• /
• 1979

Information storage and retrieval is a part of general communication process. In the Shannon's information theory, information contained in a message is a measure of -uncertainty about information source and the amount of information is measured by entropy. Indexing is a process of reducing entropy of information source since document collection is divided into many smaller groups according to the subjects documents deal with. Significant concepts contained in every document are mapped into the set of all sets of index terms. Thus index itself is formed by paired sets of index terms and documents. Without indexing the entropy of document collection consisting of N documents is $log_2\;N$, whereas the average entropy of smaller groups $(W_1,\;W_2,...W_m)$ is as small $(as\;(\sum\limits^m_{i=1}\;H(W_i))/m$. Retrieval efficiency is a measure of information system's performance, which is largely affected by goodness of index. If all and only documents evaluated relevant to user's query can be retrieved, the information system is said $100\%$ efficient. Document file W may be potentially classified into two sets of relevant documents and non-relevant documents to a specific query. After retrieval, the document file W' is reclassified into four sets of relevant-retrieved, relevant-not retrieved, non-relevant-retrieved and non-relevant-not retrieved. It is shown in the paper that the difference in two entropies of document file Wand document file W' is a proper measure of retrieval efficiency.