• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2014

Since experiments on the actual operational status are said to be very impractical because of their economic and repeatability problems, it is difficult to understand the thermal profiles of aerospace or military equipments. Thus, the CFD codes with considering the radiation heat transfer are used to compensate the defect. In case, analyzing the radiation exchanges between the object surfaces are very important. Because the temperature and the IR signal distributions of the object surface are significantly affected by the radiative heat transfer. To achieve accurate thermal radiation exchange between surfaces, it is important to calculate the radiation view factor precisely. Finer subdivision of meshes can be used to increase the accuracy of radiation view factor, but if the mesh is subdivided infinitely, the time required for calculation increases significantly and thus decreasing the efficiency. If the subdivision is not sufficient, assurance of accuracy is not guaranteed. In this paper, optimal mesh subdivision method using the solid angle has been successfully tested and found to be useful in increasing the efficiency of calculating the shape factors.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.55-59
• /
• 2012

Polyacrylonitrile (PAN)-based carbon fibers have been widely used due to their unique chemical, electrical, and mechanical properties. Electron beam irradiation has been extensively employed as means of altering properties of polymeric materials. Electron beam irradiation can induce chemical reactions in materials without any catalyst. Electron beam irradiation may be useful in accelerating the thermal compression stabilization of PAN nanofibers. To investigate the irradiation effect on PAN fibers, PAN nanofibers were irradiated by electron beam at 1,000~5,000 kGy. Irradiated and non-irradiated PAN nanofibers were heated at 180 and $220^{\circ}C$ without applying pressure for 15 min. Then 1 metric ton has been applied for 5 min. SEM images have been found that the fiber kept its morphological behavior after the hot pressing up to electron beam irradiated 1,000 kGy. DSC thermograms showed that the peak temperatures of the exothermic reactions were found to decrease with increasing electron beam irradiation doses and temperature. FT-IR spectra have been found to decrease $C{\equiv}N$ stretch band with increasing the electron beam irradiation dose. These results indicate that the modification of PAN via reactions such as cyclization is significantly enhanced by electron beam irradiation and thermal compression technique.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2093-2096
• /
• 2014

2H-azirine, a less known acetonitrile isomer, is observed in matrix IR spectra from the precursor exposed to radiation from laser ablation of transition-metals. Its vibrational characteristics confirm the previous results, and those for the deuterated and $^{13}C$ substituted isotopomers are also newly reported. The weak absorptions are traced to the low production yield due to its high energy and low extinction constants. IRC computations reveal smooth inter-conversion between 2H-azirine and $CH_2NCH$, providing a rationale for the observed variation of their relative contents during photolysis.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.26-31
• /
• 2004

The radiation-induced changes taking place in poly(vinylidene fluoride) (PVDF) exposed to $^{60}Co$ $\gamma-ray$ irradiation were investigated in correlation with the applied doses. Samples were irradiated in air at room temperature by $^{60}Co$ $\gamma-ray$ to doses in the range of 200 to 1000kGy. Various properties of the irradiated PVDF were studied using FTIR, differential scanning calorimetry (DSC), gel fraction and elongation. $^{60}Co\gamma-ray$ irradiation was found to induce changes in chemical, thermal, mechanical and structural properties of PVDF and such changes vary depending on the radiation dose.

• 한국환경성돌연변이발암원학회지
• /
• 제22권1호
• /
• pp.54-59
• /
• 2002

We have used cDNA microarray hybridization to identify gene regulated in response to gamma-irradiation in U-937 cell. The cDNA-chip was composed entirely of 1,000 human cancer related gene including apoptosis and angiogenesis etc. In gamma-irradiated U-937 cell, highly charged protein, ribosomal protein L32, four and a half LIM domains 3, lipocalin 2 (oncogene 24p3) and interleukin 15, ataxia telangiectasia mutated (includes complementation groups A, C and D) genes showed increased level of its transcription, and cell division cycle 25A, dihydrofolate reductase, topoisomerase (DNA) II beta(180kD), kinase suppressor of ras and strarigin genes showed reduced level of its transcription compared to untreated U-937 cell. The significant change of level of transcription was not found in well-known ionizing radiation(IR)-responsive gene, such as transcription factor TP53 and p53 related gene, except ataxia telangiectasia mutated gene.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.366-369
• /
• 1999

Synthetic diamond films have been deposited on the silicon(100) surface and molybdenum substrates using an microwave plasma enhanced vapor deposition (MWPECVD) method. The effect of deposition time, surface morphology, X-ray diffraction pattrm, infrared transmittance and Raman Scattering have been studied, The diamond film deposited on Mo substrate for (100) hours at 40 torr H$_2$-CH$_4$O$_2$ gas system have been shown 1${\mu}{\textrm}{m}$/h of growth rate and good crystallization

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.169-172
• /
• 2000

In this paper, we evaluated the mechanical and dielectric properties of LDPE depend on $Co_{60}$${\gamma}$-irradiation doses. The chemical analyses for FT-IR, gel content, the mechanical properties for elongation at break and the dielectric parameters for permittivity, tan$\delta$ were discussed as a function of irradiation doses. Test result presented that elongation at break of irradiated LDPE was inversely proportional to gel content. For dielectric analyses, permittivity showed a salient characteristic for various irradiation doses, it was related to polar groups caused radiation degradation and tan$\delta$ of irradiated LDPE increased with irradiation doses.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.336-345
• /
• 1996

A theoretical and experimental study was conducted in order to design highly efficient solar air heaters using porous material. Radiative characteristics of glass windows and porous absorbing media were correlated through spectral transmittances measured by the UV-Visible and the FT-IR spectrometers. Using those characteristics the efficiencies of collectors were numerically calculated with the use of the two-flux radiation model. Based on the theoretical results, an experimental solar collector was designed and constructed. Experimental results under various conditions show that the daily efficiencies are over 60% in general and agree well with the theoretically calculated ones.

• Journal of Radiation Protection and Research
• /
• 제28권3호
• /
• pp.165-172
• /
• 2003

본 연구에서는 국내 원자력발전소가 위치한 지역의 토양(영광, 울진, 고리, 고성, 월성)에 존재하는 휴믹산(HA)을 추출하여 각 시료의 원소성분 및 분광학적 방법(UV/Vis, IR, CPMAS $^{13}C$ NMR)을 이용한 물질 특성을 조사하였고, Aldrich HA과 함께 비교 분석하였다. 분자량 크기 분포의 차이는 한외여과법을 이용하여 조사하였다. 원소분석 결과, 울진 지역의 HA에서 가장 높은 산소 함량비를 보였으며, 고리와 고성지역의 HA에서 상대적으로 낮은 산소 함량비를 보였다(O/C: 0.51(UJHA) vs. 0.43(KRHA), 0.46(KSHA)). 분자량 크기 분포는 울진과 영광 지역의 HA가 고리와 고성 지역의 HA에 비하여 30,000 daltons이상의 고분자가 더 높게 존재함을 알 수 있었다. CPMAS $^{13}C$ NMR, UV/Vis., IR 등의 분광학적 특성분석 결과, 울진과 영광 지역의 HA가 고리, 고성 및 월성 지역의 HA에 비하여 상대적으로 높은 방향족성(aromaticity)과 산소 포함 작용기의 함량이 높은 특성을 보였다. 이상의 결과로 볼 때, 울진과 영광지역의 HA가 상대적으로 더 높은 휴믹화(humification) 단계의 물질 특성을 가짐을 알 수 있었으며, 금속이온과의 반응성이 더 높을 것으로 예측된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제28권1호
• /
• pp.13-17
• /
• 2005

최근 비파괴검사 현장에서 검사 중 검사장치 내 방사선원의 위치를 확인하지 못하여 방사선 과피폭 사고가 종종 발생하고 있다. 본 연구는 방사선원의 노출여부나 위치 미인지로 인한 방사선 사고를 예방하기 위해 방사선원위치를 감시할 수 있는 섬광필름을 개발하는데 있다. 섬광필름은 방사선 비파괴 검사 장비의 가이드튜브 내에 존재하는 선원의 위치를 육안으로 탐지할 수 있는 신소재이다. 연구를 통해 섬광필름의 발광성능을 평가하고 최적의 필름 설계를 꾀하였다. 필름에 적용된 발광물질은 무기 섬광체를 이용하였고, 다양한 층을 갖는 형태의 필름을 제작하여 성능을 평가하였다. 필름의 발광성능은 광도계를 이용하여 측정하였고, 비파괴 검사장비는 Ir-192 감마선 조사기를 사용하였다. 실험결과, 섬광필름의 발광은 육안으로 선원의 위치를 감시할 수 있었으며, 선원의 이동에 따라서 발광영역도 동시에 이동하면서 형성되었다. 또한, 섬광필름에 반사층을 두는 것은 광 이용률의 증대시켜 발광성능을 높이는 데 매우 효과적이었다. 섬광체와 분산용제의 혼합비에 따라서도 성능변화가 나타났으며, 일반적으로 섬광체의 양이 높을수록 발광성능은 높게 나타났다. 그러나 분산 특성이 변화로 혼합비는 일정 농도 이하로 제한되었다. 섬광체 중에서는 $Gd_2O_2S(Tb)$ 무기섬광체가 가장 높은 발광성능을 보여주었다. 개발된 섬광필름을 비파괴 검사 장비에 적용하게 된다면 방사선종사자에게 보다 안전한 작업환경을 제공할 수 있을 것이다.