In this paper, ZnO:Al thin films with c-axis preferred orientation were prepared on Soda lime glass substrates by RF magnetron sputtering technique. AZO thin film were prepared in order to clarify optimum conditions for growth of the thin film depending upon process, and then by changing a number of deposition conditions and substrate temperature conditions variously, structural and electrical characteristics were measured. For the manufacture of the AZO were vapor-deposited in the named order. It is well-known that post-annealing is an important method to improve crystal quality. For the annealing process, the dislocation nd other defects arise in the material and adsorption/decomposition occurs. The XRD patterns of the AZO films deposited with grey theory prediction design, annealed in a vacuum ambient($2.0{\times}10-3$Torr)at temperatures of 200, 300, 400 and $500^{\circ}C$ for a period of 30min. The diffraction patterns of all the films show the AZO films had a hexagonal wurtzite structure with a preferential orientation along the c-axis perpendicular to the substrate surface. As can be seen, the (002)peak intensities of the AZO films became more intense and sharper when the annealing temperature increased. On the other hand, When the annealing temperature was $500^{\circ}C$ the peak intensity decreased. The surface morphologies and surface toughness of films were examined by atomic force microscopy(AFM, XE-100, PSIA). Electrical resistivity, Gall mobility and carrier concentration were measured by Hall effect measuring system (HL5500PC, Accent optical Technology, USA). The optical absorption spectra of films in the ultraviolet-visibleinfrared( UV-Vis-IR) region were recorder by the UV spectrophotometer(U-3501, Hitachi, Japan). The resistivity, carrier concentration, and Hall mobility of ZnS deposited on glass substrate as a function of post-annealing.
Seo, Dong-Ju;Choi, Sang-Bae;Kang, Chang-Mo;Seo, Tae Hoon;Suh, Eun-Kyung;Lee, Dong-Seon
한국진공학회:학술대회논문집
/
한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
/
pp.345-346
/
2013
InGaN material is being studied increasingly as a prospective material for solar cells. One of the merits for solar cell applications is that the band gap energy can be engineered from 0.7 eV for InN to 3.4 eV for GaN by varying of indium composition, which covers almost of solar spectrum from UV to IR. It is essential for better cell efficiency to improve not only the crystalline quality of the epitaxial layers but also fabrication of the solar cells. Fabrication includes transparent top electrodes and surface texturing which will improve the carrier extraction. Surface texturing is one of the most employed methods to enhance the extraction efficiency in LED fabrication and can be formed on a p-GaN surface, on an N-face of GaN, and even on an indium tin oxide (ITO) layer. Surface texturing method has also been adopted in InGaN-based solar cells and proved to enhance the efficiency. Since the texturing by direct etching of p-GaN, however, was known to induce the damage and result in degraded electrical properties, texturing has been studied widely on ITO layers. However, it is important to optimize the ITO thickness in Solar Cells applications since the reflectance is fluctuated by ITO thickness variation resulting in reduced light extraction at target wavelength. ITO texturing made by wet etching or dry etching was also revealed to increased series resistance in ITO film. In this work, we report a new way of texturing by deposition of thickness-optimized ITO films on ITO nano dots, which can further reduce the reflectance as well as electrical degradation originated from the ITO etching process.
This study has been undertaken to evaluate hydrophobic cyclodextrin(CD) derivatives as a sustained release carrier of azidothymidine(AZT), AZT, which has potent activity against AIDS and AIDS-related complex as thymidine analogue, has been reported that it has significant toxicity and short half life. Therefore, it is necessary to design sustained release oral dosage form to avoid undesirable side effects attributable to an excessive plasma concentration and to reduce the frequency of administration of AZT. Inclusion complexes of AZT with $acetyl-{\beta}-cyclodextrin\;(AC{\beta}CD)$ and $triacetyl-{\beta}-cyclodextrin(TA{\beta}CD)$ were prepared by solvent evaporation method. Interactions of AZT with CD were investigated by Differential Scanning Calorimetry(DSC) and Infrared Spectrophotometry(IR). The decreasing order of water solubilities of AZT and AZT-CD inclusion complexes were as follows; $AZT\;(27.873{\pm}0.015,mg/ml)\;>\;AZT-AC{\beta}CD\;(3.377{\pm}0.003)\;>\;AZT-TA{\beta}CD\;(2.528{\pm}0.001)$. Partition coefficients of $AZT-AC{\beta}CD\;and;\AZT-TA{\beta}CD$ inclusion complexes were increased by 1.27-fold, 1.54-fold in pH 1.2 and 1.32-fold, 1.47-fold in pH 6.8 in comparison with that of AZT. The mean dissolution time (MDT, min) which represents the rapidity of dissolution rate of AZT, $AZT-AC{\beta}CD,\;AZT-TA{\beta}CD$ were 5.12, 14.02 and 19.38 min in pH 1.2 and 2.52, 15.19 and 18.19 min in pH 6.8. AZT was very rapidly and completely dissolved in pH 1.2 and pH 6.8 within 5 minutes. But AZT-CD inclusion complexes showed the sustained release pattern in comparison with AZT alone. The simultaneous in situ nasal and jejunal recirculation study to compare the intrinsic absorptivity and the property of absorption sites revealed that the absorption of $AZT-TA{\beta}CD\;(N:35.35{\pm}1.08%,\;J:27.47{\pm}1.18%)$ was more than that of $AZT\;(N:16.89{\pm}2.25%,\;J:15.86{\pm}2.33%)$. The above results suggest that $TA{\beta}CD$ which is a hydrophobic cyclodextrin may serve as sustained release carrier with absorption enhancing effect.
Aresenazo I-XAD-2 킬레이수지를 합성하고 이 수지에 대한 U(VI) 이온의 흡착 거동을 조사 검토하였다. 킬레이트수지는 Arsenazo I 킬레이트제와 Amberlite XAD-2의 디아조늄 짝지움 반응에 의해서 합성하였으며 원소 분석법과 적외선 분광법으로 확인하였다. U(VI) 이온 흡착의 최적 조건을 찾기 위해서 pH, U(VI) 이온농도와 진탕 시간에 관해서 조사하였다. U(VI) 이온에 대한 킬레이트수지의 전체 흡착능은 pH 4.0~4.5 범위에서 0.39mmol U(VI)/g resin이었고, pH값이 증가함에 따라 흡착능이 증가하였다. Aresenazo I-XAD-2 킬레이트 수지에 대한 U(VI) 이온의 흡착 메카니즘은 U(VI) 이온과 $H^+$ 이온 사이의 경쟁반응임을 확인하였다. 컬럼법으로 구한 U(VI) 이온의 돌파점 부피와 전체 흡착능은 각각 600ml, 0.38mmol U(VI)/g resin이었다. 3M $HNO_3$와 3M $Na_2CO_3$의 탈착용액을 사용하여 구한 회수율은 90~96%였다. 따라서 본 연구에서는 합성한 Arsenaso I-XAD-2 킬레이트수지는 자연수 바닷물 중에 함유된 U(VI) 이온의 분리와 농축에 매우 유용함을 알았다.
단백석이 주성분을 이루는 포항 지역산 규질 이암을 합성원료로 하여 $80^{\circ}C$의 온도 조건에서 10∼15%농도의 TMAOH 및 TMAOH+NaOH 용액으로 수열 반응시켜 유기 스멕타이트를 합성하였다. 이 실험에서 NaOH와 TMAOH의 혼합용액으로 처리했을 경우에는 스멕타이트 의에 NaP와 하이드록시소달라이트가 함께 합성되는데 비해서, TMAOH 용액만으로 처리했을 경우에는 이들이 수반됨이 없이 스멕타이트만 생성되었다. 합성된 스멕타이트는 X-선회절 분석, 시차열분석 및 적외선 흡광 분석을 통해서 결정구조상의 층간에 $TMA^{+}$ 이온이 개재된 몬모릴로나이트 계열의 유기 스멕타이트인 것으로 밝혀졌다. 스멕타이트 생성을 조장시킨 주요 반응 모질물은 단백석으로 밝혀졌고, 이 유기 스멕타이트의 골격 성분인 Al의 공급원으로서는 원료 물질 내에 상당량 함유되는 퇴적물기원의 스멕타이트가 그 역할을 담당하는 것으로 해석된다. 반응성이 상대적으로 낮은 석영과 운모는 대부분 이 합성반응에 관여하지 못하고 반응산물 내에서 주요 불순물로서 잔존된다. 이 같은 실험 결과들은 앞으로 이 합성 반응계에 적합한 Al 공급원이 동원될 수 있다면 저온($100^{\circ}C$ 이하)에서 이 이암을 원료로 하여 새롭고 효과적인 유기 스멕타이트의 수열합성 방안이 마련될 수 있음을 시사한다.
여러 용매(methanol, ethanol, butanol, ethylether, methylacetate, acetone, THF 및 acetylacetone)중에서 아직 보고된 바 없는 공동을 달리한 crown ether들을 리간드로 한 토륨(IV) 고체 착물을 합성하였다. 이 고체 착물에 대한 배위 화학적인 정보를 얻기 위하여 원소분석(C.H.N) 및 ICPAS법에 의한 토륨분상, 열분석과 Karl-Fischer적정법에 의한 착물중의 결정수 분석에 의해서 고체 착물들의 조성을 결정하였다. 그리고 적외선, 자외선 분광분석, $^1H$-핵자기 공명 분석 및 X-선 회절분석법에 의하여 각 합성 착물들의 결합구조에 대한 정보들을 얻었고 각 합성 착물들에 대한 용매화 현상을 논의하였다. 그 결과 아세틸아세톤 용매하에서 합성된 착물들은 아세틸아세톤을 제외한 모든 실험 용매중에서 합성된 crown ether를 가지는 토륨(IV) 착물들은 용매화 반응이 일어나지 않았다. $Th^{4+}$금속이온에 대한 리간드 결합비는 고리의 크기에 주로 영향을 받으며 12-crown-4의 경우는 1:1([$Th^{4+}$]:[lig.]) 착물, 15-crown-5의 경우는 2:3 착물 및 18-crown-6와 dicyclohexano-18-crown-6의 경우는 1:1 착물이었다. 용매화가 일어나는 15-crown-5 와 18-crown-6 착물의 경우는 1:1:1([$Th^{4+}$]:[lig.]:$[CH_3COCH_2COCH_3]$)이었다. 용매화하지 않는 모든 착물들은 crown-ether의 n-${\sigma}^{\ast}$전자전이를, 그리고 용매화된 착물은 crown-ether n-${\sigma}^{\ast}$와 acac의 $n-{\pi}^{\ast}$전자전이를 동시에 나타냈다. 반양성자성 용매에서 모든 착물들은 1:1전해질로, 물에서는 1:4전해질로 각각 행동하는 9배위자 착물임을 알 수 있다.
전계인가 진공증착법으로 β상을 가지는 PVDF (Polyvinylidene Fluoride) 박막을 제작한 후, dynamic 방법으로 초전 특성을 측정하여 초전형 적외선 센서의 응용가능성에 대하여 조사하였다. PVDF 박막의 응답특성이 저주파와 고주파 영역에 따른 변조 주파수의 주파수 분산 (dispersion)으로 고려되었고, 그에 따른 초전 특성의 주파수 의존성을 관찰하였다. 저주파 (2∼100㎐) 영역에서 분역의 재배향 (reorientation) 되는 속도는 변조주파수의 속도보다 빠르므로 분극의 변화량이 증가하여 최대 값을 나타낸다. 반면에 고주파 (100∼1000㎐) 영역에서 분역의 재배향은 주파수 증가에 따라 방해를 받아 분극의 변화량이 억제되어 초전 응답이 감소하는 것을 알 수 있다. 초전계수와 전압감도 및 비검출능을 위한 재료평가지수는 각각 3.2×10/sup -10/C/㎠·K, 2.34×10/sup -10/C·cm/J 1.32×10/sup -9/C·cm/J이었고, 잡음등가전력과 비검출능은 각각 1.66×10/sup -7/W/㎐/sup ½/, 6.03×10/sup 5/cm·㎐/sup ½/W로 나타났다.
기존의 대표적인 위성영상 융합방법들의 경우 해상도가 높은 팬크로매틱 영상에서 얻은 고주파수 성분을 모든 저해상도의 다중분광 영상 (Color성분/IR성분 등)마다 똑같이 더함으로써 고화질의 컬러 위성영상을 합성하였다. 그러나 다중분광영상들의 스펙트럼을 살펴보면 각 채널마다 대역폭이 서로 다르고 평균적인 밝기도 서로 다르므로 기존의 방법에서와 같이 각 성분에 동일한 고주파 성분을 더하면 일부 다중분광영상이 왜곡되어 전체적인 컬러가 왜곡되는 현상이 나타난다. 따라서 본 논문에서는 이러한 밝기와 스펙트럼 중첩의 차이를 보상하는 새로운 웨이블릿 변역 위성영상합성 알고리즘을 제안한다. 구체적으로, 각 다중분광영상의 밝기차이를 보정하기 위하여 서로의 명암비를 고려하면서 팬크로매틱 영상으로부터 각 채널의 고해상도 영상을 합성하는 방법을 제안한다. 그리고 다중분광 영상들 사이의 대역폭 차이를 보정하기 위한 방안으로서 각각의 웨이블릿 계수를 구하여 이들을 웨이블릿 변역에서 대역폭에 비례한 상수를 곱해서 고주파 성분을 더해주는 방법을 제시하였다. 실험은 스펙트럼의 특성이 잘 알려진 IKONOS 위성영상에 대하여 수행하였으며, 실험 결과 제안하는 알고리즘이 PSNR과 상관도 평가에서 기존의 방법보다 더 좋다는 것을 확인하였다.
반사 굴절 광학계는 굴절과 반사를 이용하여 영상을 전달한다. 영상의 질을 높이려면 광학계에 있는 부경의 편심과 경사가 작게 발생되고 주경이 광량을 최대로 받도록 부경 지지대의 형상이 결정되어야 한다. 특히 감시 정찰용 광학계는 랜덤 가속도 진동을 심하게 받는다. 이러한 환경하에 최선의 설계를 하기 위하여 표준편차로 표현된 편심과 경사에 대한 제한조건을 만족하면서 부경 지지대의 부피를 최소화하여야 한다. 편심과 경사의 표준편차는 통계적인 표현이므로 이들에 대한 설계민감도를 해석학적으로 유도하기가 어렵다. 그러므로, 이 표준편차들을 반응 표면 분석법을 이용하여 2차 회귀 방정식으로 대체한 후 형상 최적 설계를 수행하였다. 검토 결과 본 논문의 방법이 랜덤 진동을 받는 강건한 부경 지지대의 형상 최적화에 효율적임을 알 수 있다.
본 연구에서는 원적외선 방출 직불 소재를 개발하기 위해서 나노사이즈 게르마늄 업자와 PET chip을 마스터 배치 칩으로 제조하고 이를 PET와 용융 방사하여 sheath-core conjugate 복합사를 제조하여 이들의 물성과 이들 복합사로 제조한 직물의 원적외선 방출특성을 측정 분석하였다. 또한 게르마늄을 함유한 필라멘트와 직물의 물성을 측정하고 이들 물성이 사가공 공정의 중요공정 인자인 벨트각과 사속비 등의 공정인자와 직물 설계에서의 경사와 위사의 밀도에 관계하는 직물 밀도 계수 등의 설계 조건에 의해 직물 역학 특성과 직물 촉감등의 물성이 어떠한 변화를 가져 오는가에 대한 분석을 하였다. 최적 방사조건에 의한 core부에 게르마늄이 함유된 sheath-core형 PET복합사를 제조하였으며 이들의 절단강신도 모두 일반 PET계(系)의 물성치를 보였으며 DTY는 제직성에 문제가 없는 강신도를 보였고 습건열 수축률은 일반 PET사 보다 높은 값을 보였다. 게르마늄 함유 직물의 원적외선 방사강도는 $5{\sim}20{\mu}m$ 파장 영역에서 $3.53{\times}10^2W/m^2$을 보였으며 방사율은 0.874를 보였다. 그리고 최적 사가공 공정 조건 설정과 최적 직물밀도 설계로 직물의 역학 특성치와 촉감 특성의 저하를 막을 수 있음을 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.