• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.113-119
• /
• 2013

In this paper, n order to degrade of diagnosis of power supply by using Poincare map and fractal dimension with temperature measured by infrared camera. we review the characteristic of temperature variation according to pattern variation of power supply in chemical industry complex. As a simulation results we can be realized the characteristic behaviors of nonlinear dynamics in the poincare mal and fractal dimension. In the future verification method requires through additional research.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.37-54
• /
• 2004

IPNs have interpenetrating motion and phase separation behavior of independent polymers, respectively, and also these are affected by the physical interaction of polymer components. First of all, 2- and 3-component IPNs based on PU are prepared by combination with two or three components of PU, PMMA, PS and epoxy resin. And then the entire physical properties concerning morphological and mechanical behaviors of these IPNs are measured by employing FT-IR, SEM, Rheovibron, and DSC, etc. Compared with pure component, Tg's of IPN are shifted to higher temperature in all IPN kinds, and these are considered in attribution to internal movement of glass transition temperature or partial phenomenon of interpenetration. Rheovibron measurement results in a broader distribution with peaks of tan${\delta}$ or E", and this morphologically represents a medium degree of partially mixed IPNs in confirmation of SEM photographs.

• Asian Journal of Business Environment
• /
• v.4 no.4
• /
• pp.19-26
• /
• 2014

Purpose - The study is primarily aimed at framing "Position Descriptions" for some key positions in the executive cadre of the testing department of CESC Limited. Research design, data, and methodology - The questionnaire, interview, and observation methods have been used for the purpose of data collection. The position descriptions are validated by superiors belonging to the respective departments. Results - It has been found that there is overlapping of job duties and job responsibilities in the department. This overlapping is quite alarming for the organization and may even become a hurdle in the path of its progress. It can be seen as a classic case of de-layering. Conclusions - The study concludes that good communication along with interpersonal and negotiation skills are absolutely essential to facilitate the performance of the day-to-day duties of a job, including handling the union, solving IR related issues, development of the subordinates, job setting, distribution and allocation, etc. Position descriptions will help in the alignment of the employee direction, and can be a useful tool to aid the communication between management and employees.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.61-80
• /
• 1998

To investigate in influence of photosensitizer used with benzophenone(BP) in the curing rate and physical properties of UV curable hard coating on plastic, we prepared UV curable clear and pigmented coatings with DEA, DMA, NPM and TEA as photosensitizer, respectively. The curing rate calculated from the decrease of the absorbance of acrylic double bond measured by FT-IR spectroscopy increased s follows; DEA>DMA>NPM>TEA. this order could be explained by the reactivity of diethylamino group of DEA and the ease of formation of activated complex between BP and photosensitizer during the curing process. In UV curable pigmented coatings, the order of curing rate increased as follows; DEA>DMA>TEA>NPM. It was found that the curing rate of the pigmented coating can be increased by light scattering of TiO$_2$. The hardness of coating film cured by photosensitization of DEA and DMA is higher than other photosensitizers due to the crosslinking reaction of DEA and DMA radical bound to polymer backbone.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.152-156
• /
• 2006

기존의 가정용 건강측정기는 기기만이 독립적으로 사용되거나 기기로부터 생체정보를 전송 받아 로컬 컴퓨터에서만 처리하는 시스템이 주를 이루었다. 본 논문에서는 가정용 건강측정기 중 혈당측정기를 적외선 통신(Infrared Communication, IrDA)으로 PocketPC에 연결하여 혈당정보를 전송받는다. 이러한 정보를 PocketPC용 CDMA(Code Multiple Access) 확장 팩을 이용하여 문자메시지(Short Message Service, SMS)로 다른 휴대폰에 전송하고, 무선 랜(WLAN, IEEE 802.11)을 이용하여 웹서버에 있는 게시판에 건강측정정보를 자동 등록 하여 정보를 공유할 수 있는 시스템을 구축하였다. 특히 비공개된 혈당측정기의 프로토콜을 분석하여 통신에 사용하였으며, API(Application Programming Interface)를 제공하지 않는 CDMA 확장팩 시스템의 사용자용 프로그램을 IPC(Inter Process Communication)를 이용한 제어를 통해 필요한 태스크를 수행하는 기법을 사용하였다.

• Journal of the Optical Society of Korea
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2005

Using tightly focused femtosecond laser pulses, we produce an optical waveguide and optical devices in transparent materials. This technique has the potential to generate not only channel waveguides, but also three-dimensional optical devices. In this paper, an optical splitter and U-grooves, which are used for fiber alignment, are simultaneously fabricated in a fused silica glass using near-IR femtosecond laser pulses. The fiber aligned optical splitter has a low insertion loss, less than 4㏈, including an intrinsic splitting loss of 3㏈ and excess loss due to the passive alignment of a single-mode fiber. Finally, we demonstrate the utility of the femtosecond laser writing technique by fabricating gratings at the surface and inside the silica glass.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1443-1447
• /
• 2012

In this paper, the characteristic of temperature variation was reviewed according to pattern variation. In order to degrade of diagnosis of power supply by using time series data for temperature measured by infrared camera it was transformed into 2 dimension phase plane using Takens embedding method. As a simulation results we cannot completely confirm the characteristic behaviors of nonlinear dynamics in phase plane. However these results has a certain patterns, it requires verification method through additional research in the future.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.17-29
• /
• 1993

As inverstigating the influence of monomers and photoinitiator in the polymerization rate of photopolymerization by using IR spectroscopy, photopolymerizations initiated by ultraviolet radiation are characterized by the presence of an autoacceleration in the polymerization rate as the reaction proceeds. The conversion for the end of the autoacceleration varies considerably depending on the monomer and reaction condition which determines coil size and viscosity. In UV curable systems, the autoacceleration begins at only a few percent conversion and continues to 40% in HEA solution and 60% conversion in EHA solution. The polymerization ate in HEA solution increased as follow; DMHA > HCPK > DMPA and could be explained by the interaction between the initiating radical and HEA monomer and the size of the photodissociated radical of initiator. But the tendency of autoacceleration in EHA solution is almost independent on initiator.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.89-93
• /
• 2020

In this paper, Ku-band Receiver for compact doppler radar has been designed and fabricated. It composed of MWR(Microwave Receiver) and IFR(Intermediate Frequency Receiver) which have 5 receive path. We applied limiter circuit to protect MWR from Tx leakage power and maximum 2 W. IFR can change the Rx path to broad band or narrow band by MSC(Mode Selection Switch). It is observed that fabricated receiver performs 68 dB gain and 3.7 dB noise figure, 93 ns limiter recovery time. Proposed Ku-band receiver is expected to apply for Ku-band compact doppler radar.