• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.42-45
• /
• 1994

정밀화학, 제약산업 등에 필요한 에탄올, IPA 등과 같은 유기용매를 고순도로 농축하는 공정은 유기용매와 물과의 혼합물이 일정 농도에서 공비점을 형성하여 일반 증류로는 분리하기 힘들어 Benzene, Cycloheaxane 드의 Entrainer를 첨가하여 상대휘발도를 변화시켜 분리하는 공비증류가 이용되고 있다. 그러나 공비증류는 에너지 사용량이 많고 유독한 물질을 사용하므로 투과증발법과 같은 저에너지 소비형, 환경 친화적인 공정에 대한 관심이 높아지고 있다. 투과증발법에 의한 유기용매 농축공정은 물과의 친화성이 높은 비다공성 막을 이용하여 선택적으로 물을 투과하여 유기용매를 탈수하는 방법으로 투과를 위한 Driving force는 Feed side와 Permeate side사이의 Chemical potential gradient로 이는 물에 대한 Partial vapor pressure differnece로 다음과 같이 표시된다. $\Delta \mu_{F/P.W} = RT ln\frac{y_WP_P}{x_W\gamma_WP_{o.W}}$ 따라서 투과속도를 높이기 위해서 Permeate side를 진공상태로 하여 투과하는 물질을 기화시키고 이를 다시 응축하여 Permeate side의 압력을 낮게 유지시켜야 한다.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.257-266
• /
• 2013

The main purpose of this study is to develop a commercial scale of pervaporative process equipped with hollow fiber membrane modules, being able to effectually purify organic solvent at high temperature well over its boiling point under high vapor pressure. Three constituent technologies have been developed; 1) to fabricate braid-reinforced hollow fiber membrane stable in high pressure and high temperature application, 2) to design and fabricate a commercial scale of hollow fiber membrane module, and 3) to design and fabricate a pilot scale of pervaporation equipment system. The developed hollow fiber membrane possesses a membrane performance superior to the membrane of Sulzer (Germany) which is the most-well known for pervaporation process, and the membrane module equips hollow fiber membranes of $4.6m^2$ and the pervaporation system can treat organic liquid at 200 L/h, which is based on the dehydration of 95 wt% isopropyl alcohol (IPA). Since the membrane module is designed to flow in and pass through the inside of individual hollow fiber membrane, not to involve both the formation of feed's dead volume observed in flat-sheet membrane module and the channeling of feed occurring inside hollow fiber bundle which lower membrane performance seriously, it showed excellent separation efficiency. In particular, the module is inexpensive and has less heat loss into its surrounding, in compared with flat-sheet membrane module. In addition, permeant can be removed effectively from the outer surface of hollow fiber membrane because the applied vacuum is conveyed uniformly through space between fibers into respective fiber, even into one in the middle of the hollow fiber bundle in which the space between fibers is uniform in distance. Since the hollow fiber membrane pervaporation system is the first one ever developed in the world, our own unique proprietary technology can be secured, preoccupying technical superiority in export competitive challenges.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.369-376
• /
• 2023

In this study, the alternative to the energy-intensive conventional vacuum distillation process, an eco-friendly and energy-efficient pervaporation separation was employed in 1,2 hexane diol/water (HDO/water) mixture. The crosslinked PVA-glutaraldehyde was coated inside the alumina hollow fiber membrane (Al-HF). In the HDO/IPA pervaporation separation, optimization of the membrane concerning PVA/GA ratio, curing temperature, and pervaporation operating condition were performed. In the long-term stability test, the sustainable pervaporation separation performance giving flux in the range of 1.90~2.16 kg/m²h, and water content in permeate was higher than 99.5% (separation factor = 68) was obtained from the PVA/GA (molar ratio = 0.08, curing temperature = 80℃) coated Al-HF membrane from HDO/water (25/75, w/w, %) mixture at 40℃. Therefore, this work provides potential and inspiration for PVA-based membranes to mitigate excessive energy requirements in HDO/water separation by pervaporation.