• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.77-85
• /
• 2013

Recently, location information based routing protocol has been studied to estimate end-to-end path in wireless ad-hoc network. This protocol assumes all nodes can get heir location information via GPS devices and floods only limited area with routing message through acquired location information. Therefore, this protocol has advantage that can reduce the number of routing message than the existing IP-based routing protocols. In addition, all nodes enabling this protocol must acquire their own location information to participate in the location-based routing. However, recent because of the miniaturization of sensor node, sensor node without GPS function has been launched. Therefore in case of the sensor node that does not know location information, it is impossible to participate in the ad hoc network configuration and location information based routing. In this paper, a virtual location information based routing scheme is proposed for wireless nodes without GPS function to be able to participate in location information based routing within ad hoc network environments consisting of wireless nodes with GPS function and wireless nodes without GPS function. Therefore, the proposed protocol has the advantage that a wireless node without a GPS function is able to participate in ad hoc network configuration and the location information based routing.

• Journal of The Korean Association of Information Education
• /
• v.15 no.1
• /
• pp.129-136
• /
• 2011

The aim of this study is to present the handover procedures and the performance comparisons of layered mobility management schemes for wireless mobile Internet. To investigate efficient mobility management schemes providing seamless information services in a mobile environment, this paper provided the detailed discussions of existing network layered mobility management scheme, including Mobile IPv4, Mobile IPv6, and new transport layer mobility management scheme, stream control transmission protocol (SCTP) based mobility architecture (SMA). Network simulator-2 (ns-2) was used to compare the performance between Mobile IPv6 and SMA in the wireless mobile Internet environment. Simulation results show that for typical network configuration and parameters, SMA has a lower handover latency, lower packet loss rate, and higher throughput than Mobile IPv6.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.695-698
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other hone network via Internet through IGD DCP with control commands of UPnP.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.65-80
• /
• 2012

Mobile IP is a simple and scalable global mobility solution. However, it may cause excessive signaling traffic and long signaling delay. So MN (Mobile Node) to the home network in order to reduce the number of location update signaling is necessary to reduce the delay. In this paper, the signaling overhead to be distributed evenly on the boundary of the regional network, each MN's dynamic mobility and traffic load is adjusted according to the PMIPv6 (Proxy Mobile IPv6) networks in the proposed dynamic regional mobility management scheme (dMMS). Each user in a distributed network system that offers the least amount of signaling traffic is tailored to the optimized system configuration. Signaling cost function in order to propose a new discrete analytical model is proposed, MN's mobility and packet arrival patterns. Location update and packet delivery costs to calculate the total average, the optimized area to determine the size of the network is proposed. The results of mathematical analysis, the proposed technique dMMS in terms of reducing the cost of the entire signaling were found to be excellent performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.815-821
• /
• 2013

In this paper, application layer protocol of C12.22 node, defined by ANSI C12.22 is implemented. ANSI C12.22 defines application layer only among the OSI 7 layers and recommends using the existing protocols for the 1~4 layer to transmit the information. TCP/IP which is one of the generally used protocols has been applied for the transport and network layer protocol in this paper. ANSI C12.19 defines the parameters for the watt-hour meter, and C12.22 application layer defines the network services and data structures networking the watt-hour meter parameters at a minimum. This kind of services and data structures are used for the configuration, programming, monitoring of the networked watt-hour meter or collecting information of the watt-hour meter. A embedded board has been used to implement the C12.22 application layer and a test program for the AMI application server has been developed for the functional test.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.185-194
• /
• 2007

WiBro has become intentionally standardize as IEEE 802.16e. This WiBro service has been started by a portable internet at home as well as abroad. In this paper, an offender hacker do not direct attack on system on system that It marched an attack directly in damage system because a place oneself in mobile station of portable internet WiBro and avoid to attack hacker's system. At this time, a mobile make use of network inspection policy for back-tracking based on log data. Used network log audit, and presented TCP/IP bases at log bases as used algorithm, the SWT technique that used Thumbprint Algorithm. Timing based Algorithm, TCP Sequence number. Study of this paper applies algorithm to have been progressed more that have a speed to be fast so that is physical logical complexity of configuration of present Internet network supplements a large disadvantage, and confirm an effective back-tracking system. result of research of this paper contribute to realize a back-tracking technique in ubiquitous in WiBro internet network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1055-1057
• /
• 2013

Routers currently used in homes and institutions have a function of multiple computers to connect to the Internet with a single IP address. It is possible only through setting or establishing a separate operation in a used PC or server to function as a web/printer server, web hard, and P2P. In this paper, by utilizing the OpenWRT Linux-based through the construction of the Web server through a router OpenWRT of (Open Wireless Router) base, to build a server simple compact, low power consumption, low cost, to operate by reliability to provide Internet telephony and multimedia services high securely over the server security, which is based on the setting of policy and various firewall at the same time the configuration of the network utilizing OpenWRT router that can be enhanced, to construct a Web server through a router multi functional can receive the provision of services using the program PC and mobile APP.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.229-234
• /
• 2008

The new millennium has started with several innovations driven by fast evolution of the technologies in energy sector. A strong impulse towards the diffusion of new economical efficient technologies regulatory incentives related to energy production from renewable source and a small scale building trigeneration and to promotion of more sustainable environmental-friendly generation solutions, the evolution of electricity markets, more and more binding local emission constraints, and the need for improving the security of supply to reduce the energy system vulnerability. The 24 percentage energy quantify of total energy consumption consumes in commercial buildings and residential houses and the 30% portion of total $CO_2$ emissions covers also in the commercial buildings and residential houses sector. To cope with efficiently this energy sinuation in building sector, Building microgrid or building tooling, heating & power(BCHP) system has been interested in recent day due to meeting thermal and electric energy requirements efficiently and with appropriate energy quality. A multi agent system is a collective of intelligent agents that communicate with each other and work cooperatively to achieve common goals. Also, it is to medicate and coordinate communication between Control Areas and Security Coordinators for teal-time control of the BCHP system and the power pid. In this new circumstance, it is very important to integrate the power and energy delivery system and the information system(communication, networks, and intelligent equipment) that controls it. Therefore, development of smart control modules with open communication protocol and seamlessly interchange the data and information between control network and data network including extranet and intranet give a great meanings. We designed and developed the TCP/IP-CAN IED agent modules and ModBus./LonTalk/(TCP/IP) IED agent ones to configure the multi-agent system based smart energy network of commercial buildings and also intelligent algorithms for inverter fault diagnostics which ran be operated in control level or agent level network.

• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.935-944
• /
• 2009

Recently, many researches focus on Ubiquitous Network which comprised various networks for effective service provision. In particular, OSGi proposed by OSGi Alliance is preferred for core infrastructure to establish Ubiquitous Network as it supports integration and inter-operation among various service environments, and dynamic configuration of services. However, OSGi is limited to be used only within local service framework, since OSGi specification does not have any considerations for inter-operations between internal and external services. Thus, in this paper we propose JARSIO(JAva Remote Service Invocation for OSGi) framework which enables the inter-operations of dynamic internal OSGi services and other external services. The proposed framework is based on the TCP/IP protocol, and provides effective mechanisms for the inter-operations of the services.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.201-207
• /
• 2013

Recently, the interest in a Mobile Office is increasing dramatically and the Smart Phone App Service begin in earnest to be requested in an area of applying SAP system to PC. This study aims to research the system which can be easily implemented with the configuration and Mobile App which cause difficulties in embodying SAP system-based Apps suitable for a mobile environment. First, by realizing SAP system interface that can operate in mobile devices in the form of GUI, assisting the connecting parts of SAP for the users-friendly set-up, providing the communication method of Client, Application, and SAP Service in the form of web service through TCP/IP, and finally showing cases of implementing the method of delivering the data request and result value of Server and Client in the form of XML suggest more effective and new method, the research suggests a new way of making the linkage of SAP more efficient.