• Journal of Digital Contents Society
• /
• v.19 no.5
• /
• pp.1011-1019
• /
• 2018

Existing exploration robot is able to control its speed using technologies such as the remote control and deep learning. However its speed control method using weather information has not been proposed. To overcome the problem of conventional methods without using the weather information which is an useful ordinary life information, this paper proposes a new speed control method of exploration robot using weather information gathered from RSS service which is offered without cost by the Meteorological Agency. The exploration robot implemented in this paper is controled by the remote control through the TCP/IP communication and provides real-time real spot figure gathered from its camera sensor within the range of WiFi. Additionally, according to the weather information from URL of the Meteorological Agency, the implemented exploration robot autonomously controls it speed. The correct performance of the proposed method is verified by the experimental measurement data of its speed according to the precipitation probability and wind speed in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.493-495
• /
• 2016

In this paper, we propose an alternative method of collecting image data and changing nodes in wireless sensor networks based sensing disaster systems configured with zigbee using quad copter. It is difficult to observe a wide area caused by existing fixed video cameras in the wireless sensor network system using a conventional image-based. Also the nodes don't have provide to alternate methodology in situations when missing due to a disaster or destruction. In this paper, to use wearing the IP camera and the communication node to the quad copter, it provides a method to take advantage of as improving an alternative node of the reliability of the sensor node. The results show to improve the reliability of the sensor nodes and real-time status information through a video quad Copt than conventional systems.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.565-570
• /
• 2015

In this paper, we implemented the smart door lock system that control remotely devices using the concept of internet of things. Internet of things is intelligent system that can help devices to communicate with people and devices. And recently internet of things is getting attention because of advance of hardware technology and big data. The smart doorlock system based on internet of things used raspberry pi, sensor and doorlock. Using the smart phone, doorlock can be controlled from the raspberry pi server. And the user can identify some people that is in front of doorlock. also user can check around of doorlock in realtime using the raspberry pi camera.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12B
• /
• pp.1115-1123
• /
• 2003

In this paper, a remote control system called TeleRemote system which can be applied to existing wireless mobile networks or public telephone networks for remote control is designed and implemented. The proposed design employs program technology based on the theory of signal detect control and enables the EPG(Electronic Program Guide) functions such as recording reservation of bidirectional video signals with TV reception card on PC. It can also control recording reservation using remote control program through telecommunication network The PC-EPG system is implemented in Web programs with Server/Clinet architecture and the server system that provides EPG functionalities is in charge of recording reservations and data communications by means of the scheduler program. Data storing to client PCs is performed through TCP/IP and finished by client programs implemented using Visual C++/MFC programs. As remote control system, the developed system can be used for unmanned security system using the Web camera. Building intranet and making connection to internet, the TeleRemote system is believed to create potential for commercial communication system.

• Journal of Internet of Things and Convergence
• /
• v.7 no.1
• /
• pp.71-77
• /
• 2021

As the IOT technology has developed, it becomes more big issues about IOT device security. An account management is a nerve-in-the-box routine job for the system administrator and users who manage the several hundreds IOT devices(IP camera, Home IOT, the various measuring equipment). This study is to propose the account management system by the hierarchical design and it is efficient for the user to manipulate the account management. The designed system supports 6 functions for the account management and apply the advanced technologies for the existed system. After the performance of the designed system is validated successfully by the authoritative test, the designed system is applied for the relative fields. And it is on going for the development of the smart account management system by applying the AI technique.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.77-84
• /
• 2021

In this paper, we propose a system that uses image data and beacon data to classify authorized and unauthorized perosn who are allowed to enter a group facility. The image data collected through the IP camera uses YOLOv4 to extract a person object, and collects beacon signal data (UUID, RSSI) through an application to compose a fingerprinting-based radio map. Beacon extracts user location data after CNN-LSTM-based learning in order to improve location accuracy by supplementing signal instability. As a result of this paper, it showed an accuracy of 93.47%. In the future, it can be expected to fusion with the access authentication process such as QR code that has been used due to the COVID-19, track people who haven't through the authentication process.

• Journal of radiological science and technology
• /
• v.30 no.2
• /
• pp.105-111
• /
• 2007

This study is to calculate the proper angle for the optimal image of PNS Water's view on children, comparing and analyzing the PNS Water's projection angles between children and adults at every age. This study randomly selected 50 patients who visited the Medical Center from January to May in 2005, and examined the incidence path of central ray, taking a PNS Water's and skull trans-Lat. view in Water's filming position while attaching a lead ball mark on the Orbit, EAM, and acanthion of the patients's skull. And then, we calculated the incidence angles(Angle A) of the line connected from OML and the petrous ridge to the inferior margin of maxilla on general(random) patients's skull image, following the incidence path of central ray. Finally, we analyzed two pieces of the graphs at ages, developing out the patients' ideal images at PNS Water's filming position taken by a digital camera, and calculating the angle(Angle B) between OML and IP(Image Plate). The angle between OML and IP is about $43^{\circ} in 4-years-old children, which is higher than $37^{\circ}, as age increases the angle decreases, it goes to $37^{\circ} around 30 years of age. That is similar result to maxillary growth period. We can get better quality of Water's image for children when taking the PNS Water's view if we change the projection angles, considering maxillary growth for patients in every age stage.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.137-152
• /
• 2017

The decline in the price of IT devices and the development of the Internet have created a new field called Internet of Things (IoT). IoT, which creates new services by connecting all the objects that are in everyday life to the Internet, is pioneering new forms of business that have not been seen before in combination with Big Data. The prospect of IoT can be said to be unlimited in its utilization. In addition, studies of standardization organizations for smooth connection of these IoT devices are also active. However, there is a part of this study that we overlook. In order to control IoT equipment or acquire information, it is necessary to separately develop interworking issues (IP address, Wi-Fi, Bluetooth, NFC, etc.) and related application software or apps. In order to solve these problems, existing research methods have been conducted on augmented reality using GPS or markers. However, there is a disadvantage in that a separate marker is required and the marker is recognized only in the vicinity. In addition, in the case of a study using a GPS address using a 2D-based camera, it was difficult to implement an active interface because the distance to the target device could not be recognized. In this study, we use 3D Depth recognition camera to be installed on smartphone and calculate the space coordinates automatically by linking the distance measurement and the sensor information of the mobile phone without a separate marker. Coordination inquiry finds equipment of IoT and enables information acquisition and control of corresponding IoT equipment. Therefore, from the user's point of view, it is possible to reduce the burden on the problem of interworking of the IoT equipment and the installation of the app. Furthermore, if this technology is used in the field of public services and smart glasses, it will reduce duplication of investment in software development and increase in public services.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.116-119
• /
• 2004

The existing monitoring and control systems of utility-pipe conduit (power tunnel, cable tunnel etc) have established communication lines using optical fiber, leaky coaxial cable (LCX), and several kinds of control cable. Due to the properties of the used media, the cost of equipment is considerably high and the maintenance of the system is difficult. Also, the term of carrying out is long so that the extension of the system is in difficulty. Now it is desirable to adopt Power Line Communication (hereinafter, PLC) technology in the monitoring and control systems and use the existing low-voltage power-line for lamplight as communication line. This will lead the reduction of the construction cost and the easy maintenance of the system. In this paper, we research the characteristics of PLC in conduit, design and manufacture the field test system, and analyze the performance of the system by field test. Then, we introduce the reliable monitoring and control system of utility-pipe conduit using PLC.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.388-390
• /
• 2004

In this paper, we performed the implementation of image transmission server system using embedded system that is for the specified object and easy to install at any places and move to wherever. Since the embedded system has lower capability than PC, we have to reduce the quantity of calculation and transmission. The image compression like JPEG, needs that the server calculates for making compressed image, makes the server carry the load. So we compresses the image at the server and transmit the codes to the clients connected, then the received codes from server are decoded and displayed at the clients. In this process to make the image compression and transmission effectively, we decrease the procedure as simple as possible to transmit the data in almost real-time. We used the Redhat linux 9.0 OS at the host PC and the target board based on embedded linux. The image sequences are obtained from the camera attached to the FPGA board with ALTERA chip. For effectiveness and avoiding some constraints, we made the device driver. Generally the image transmission server is PC, but using the embedded system as a server makes the server portable and cheaper than the system based on PC.