• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.750-751
• /
• 2015

본 논문에서는 스칼라포텐셜을 계변수로 하는 2차원 공간고조파법을 이용하여 동축 마그네틱 기어의 자계 특성을 해석하였다. 공극자속밀도는 중첩의 원리에 의해 얻어지며 표면 부착형 영구자석을 가지는 고속 회전자 모델과 Inset type의 자속 집중형 저속 회전자 모델로 구분되었다. 공간고조파법에 의한 결과는 유한요소해석과의 비교를 통해 타당성을 검증하였다.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.130-137
• /
• 2009

TV broadcast of election returns is an index to measure a public responsibility, scientific analysis and production power in each broadcasting station. This is the reason why each broadcasting station is spending a great amount of money, mobilizing many people and using facilities. TV election returns broadcast has been advanced for decades, particularly in its production, system and presentation. And, among those, broadcast graphic and inset graphic, which are representing election-related information, have became the important components in TV broadcast of election returns because of the advancement of production technology, a variety of presentation forms, and the visual effects. In this research, I analyze the part of image composition in inset graphic of TV election returns broadcast. As a result, in making insert graphic, each broadcasting station is analyzed to be producing the accurate and clear delivery of information on the stability and reliability of a visualized form, first and foremost. It requires that we research the methodology for the accurate and reliable delivery of information, as well as various image productions with a result of the progress in production technology.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.372-377
• /
• 2020

This paper is based on the triangular inset patch antenna as the basic structure, and the array structure is the twin tree form to improve the antenna's main lobe gain and reduce the side lobe gain. A twin tree structure was implemented by placing two identical trees of 2-4-6 arrays of triangular inset patches side by side. The parametric analysis confirmed that the gap between tree structures arranged side by side is most effective for impedance matching. The fabricated antenna has a gain of 16.74 dBi at 24.15 GHz, and the beam width of the main lobe is 22° in the E-plane and 6° in the H-plane. The antenna size was 125 mm × 50 mm, and a Taconic TLC substrate with a dielectric constant of 3.2 was used. Although the main lobe gain is improved over the twin tree structure, The directivity in the beam pattern due to the mutual interference of the two tree array structure can be improved.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.70-78
• /
• 2000

In applying high-${\underline{T_c}}$ superconducting material to microwave devices, Uncertainty of electromagnetics of high-${\underline{T_c}}$ superconductor(HTS) and the temperature dependence of the substrate fits with HTS thin film cause difficulty in realization of such antenna for industrial applications. It must be noted to characteristic the HTS antenna in contrast with normal conducting counterpart for this real application. In this paper, a comparative study between HTS microstrip antennas and gold antennas was reported in terms of the return loss, the characteristic impedance, efficiency, and other various characteristics. HTS thin films were $YBa_2Cu_3O_{7-x}$ (YBCO) on MgO substrates. Superconducting microstrip antennas used in this work were to directly inset a microstrip transmission line into the 50 ${\Omega}$ region of the radiating patch. Measurement results of HTS antennas and gold antennas showed that usable antennas can be made using this architecture.

• Archives of Plastic Surgery
• /
• v.49 no.1
• /
• pp.29-33
• /
• 2022

The application of minimal invasive mastectomy has allowed surgeons to perform nipples-paring mastectomy via a shorter, inconspicuous incision under clear vision and with more precise hemostasis. However, it poses new challenges in microsurgical breast reconstruction, such as vascular anastomosis and flap insetting, which are considerably more difficult to perform through the shorter incision on the lateral breast border. We propose an innovative technique of transcutaneous medial fixation sutures to help in flap insetting and creating and maintaining the medial breast border. The sutures are placed after mastectomy and before flap transfer. Three 4-0 nylon suture loops are placed transcutaneously and into the pocket at the markings of the preferred lower medial border of the reconstructed breast. After microvascular anastomosis and temporary shaping of the flap on top of the mastectomy skin, the three corresponding points for the sutures are identified. The three nylon loops are then sutured to the dermis of the corresponding medial point of the flap. The flap is placed into the pocket by a simultaneous gentle pull on the three sutures and a combined lateral push. The stitches are then tied and buried after completion of flap inset.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.344-350
• /
• 2001

This paper was studied on the characteristics of galvanic corrosion and its protection on heat exchanger tube plate in the sea water. In this paper, behavior of pitting corrosion of Ni-al bronze connected with Ti tube was measured af flow velocity of 0 m/s and 2.4 m/s. To protect galvanic corrosion, the protection characteristics of Ni-Al bronze connected with Ti tube by Zn-base alloys galvanic anode and hexagonal nylon insert was investigated. Main results obtained asre al follows: 1) The galvanic corrosion of Ni-Al bronze connected with Ti-tube is more active than single Ni-al bronze. 2) As the circuit resistance increase under the cathodic protection employing Zn-base alloys galvanic anode, Ni-al bronze connected with Ti tube is cathodically unpolarized. 3) The corrosion of Ni-Al bronze connected with Ti tube by nylon insert controls approximately 73% than not nylon insert.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.2
• /
• pp.345-345
• /
• 2001

This paper was studied on the characteristics of galvanic corrosion and its protection on heat exchanger tube plate in the sea water. In this paper, behavior of pitting corrosion of Ni-al bronze connected with Ti tube was measured af flow velocity of 0 m/s and 2.4 m/s. To protect galvanic corrosion, the protection characteristics of Ni-Al bronze connected with Ti tube by Zn-base alloys galvanic anode and hexagonal nylon insert was investigated. Main results obtained asre al follows: 1) The galvanic corrosion of Ni-Al bronze connected with Ti-tube is more active than single Ni-al bronze. 2) As the circuit resistance increase under the cathodic protection employing Zn-base alloys galvanic anode, Ni-al bronze connected with Ti tube is cathodically unpolarized. 3) The corrosion of Ni-Al bronze connected with Ti tube by nylon insert controls approximately 73% than not nylon insert.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.167-171
• /
• 2011

In this paper, $2{\times}4$ microstrip patch antenna are proposed to implement K-band satellite communications. The microstrip feed line are inset into the radiation patch to match input impedance. Also the same current in each elements are excited by Kirchhoff's low. The elements distance of proposed array antenna are optimized $0.8{\lambda}_g$ to minimize a mutual coupling and maximize a gain. A power divider network are employed to distribute T-junction divider. As result, the proposed antenna get gain of 14[dBi] at 10.525[GHz].

• Tunnel and Underground Space
• /
• v.7 no.3
• /
• pp.208-220
• /
• 1997

To asses the stability of structure around shaft during the excavation of -300 ml hopper room at 2nd shaft in Jangsung mine, some measurements were made with blast monitoring, stressmeter, extensometer and inclinometers. Instrumentations proved to be reliable and data were montiored over six month period. Stressmeters were set at the points of wall and arch of inset gang(level). Induced stresses were measured with the magnitude of 2.81 kgf/$\textrm{cm}^2$(tensile stress) and -4.45kgf/$\textrm{cm}^2$(compressive stress) respectively. These values were converged after two months. The magnitude of axial force in rock bolt was measured with 1.98 ton between the points of M2(2.25m) and M3(1.5 m) but this value was assumed within allowable level. Maximum displacement was also measured with 2 mm at the dephs of 12m from surface. But this value belongs within guide level.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.1
• /
• pp.27-29
• /
• 2010

Tracheostomal stenosis after total laryngectomy is brothersome problem to surgeon and patient. To prevent tracheostomal stenosis, tension around the tracheostoma must be released. Advancement flap, V-Y inset and Z-plasty were suggested as solution to tracheostomal stenosis. But such methods need elevation of superior flap and it is very difficult when the patients received radiotherapy and has high change of developing pharyngocutaneous fistula. We suggested new stomaplasty technique which named "Modified Fish-Mouth Technique" that does not need to elevate superior skin flap.