• Advances in aircraft and spacecraft science
• /
• v.6 no.6
• /
• pp.443-461
• /
• 2019

This communication investigates exact and distorted similitudes and the related scaling laws for the analysis of both dynamic response and radiated power of rectangular plates. The response of a given panel in similitude from another one is determined from a generalization of the modal approach, allowing the use of mode shapes, natural frequencies and finally radiation functions in order to establish appropriate scaling laws. Analytical models of simply supported rectangular plates are used to produce both original and replica model responses under point mechanical excitation. Emphasis is then especially put on laboratory experiments which are performed on baffled simply supported aluminum panels under mechanical excitations. All the six possible scaling directions, i.e. predicting a plate vibroacoustic reponse from another plate, are reported. All obtained results show that structural response or radiated sound power of a given plate can be both recovered with satisfactory accuracy by using the related scaling laws, even if parent models are used.

• Korean Journal of Clinical Laboratory Science
• /
• v.45 no.2
• /
• pp.77-85
• /
• 2013

Intraoperative Neurophysiological Monitoring (INM) is very useful in monitoring the motorsensory pathway and vascular circulation system during intraspinal, or intracranial neurosurgery. Brainstem Auditory Evoked Potentials (BAEPs) are for detecting the problems along the auditory pathways including, the eighth cranial nerve and brainstem. Motor Evoked Potentials (MEPs) is a useful adjunct to conventional monitoring of Somato-sensory Evoked Potentials (SEPs) during surgery. Visual Evoked Potentials (VEPs) has been regarded as having limited significance for the preservation of visual function during neurosurgical procedures. In this paper, we propose that the most appropriate averaging of the number of inspections in the inspection of each used in the operative field, is good and efficient, functionally.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.43-43
• /
• 2020

보령댐은 충남 서부지역 8개 시·군에 생활용수와 공업용수를 공급하고 있는 중요한 수원으로 최근 우리나라에서 발생한 연속적인 가뭄으로 2015년에는 저수율이 7.5 %까지 감소하여 제한급수가 시행되었다. 본 연구에서는 가뭄으로 인한 물 공급 부족에 취약함을 보인 보령댐 유역(297.4 ㎢)을 대상으로 SWAT(Soil and Water Assessment Tool) 모델과 RCP(Representative Concentration Pathways) 시나리오를 활용하여 극한 기후변화 사상이 반영된 보령댐의 내한능력을 평가하였다. SWAT 모형을 활용하여 보령댐의 물수지를 모의하기 위하여 보령댐의 실측 유출량, 저수량, 방류량으로 보령댐 유입량과 저수량을 보정(2002~2004) 및 검정(2005~2007)하였으며, 실측 저수량을 기반으로 미래 댐 운영을 모의하였다. 검·보정 결과, 댐 유입량과 저수량의 PBIAS(%)는 -0.04, -0.09, NSE(Nash and Sutcliffe Efficiency)는 0.52, 0.96, RMSE(Root Mean Square Error)는 1.80 mm/day, 0.67 × 10⁶㎥로 분석되어 신뢰성 있는 모의 결과를 보였다. 보정된 SWAT 모형으로 가뭄 사상이 반영된 기후변화를 모의하기 위하여 APCC의 26개 CMIP5 GCM 시나리오를 SPI (Standardized Precipitation Index)와 연속 이론(Runs theory)으로 분석하여 6개의 극한 가뭄 시나리오 (RCP 4.5, 8.5 CMCC-CM, INM-CM4, IPSL-CM5A-MR)를 선정하였으며, 선정된 시나리오를 모형에 적용하여 가뭄 사상을 반영한 보령댐의 미래 내한능력을 평가하였다. 내한능력평가 및 분석 기간은 Historical(1980~1999; 1990s), Present(2000~2019; 2010s), 그리고 미래 기간 (2020~2039; 2030s, 2040~2059; 2050s, 2060~2079; 2070s, 2080~2099; 2090s)으로 나누었으며, 취약성(Reliability), 회복성(Resilience), 위험성(Vulnerability), 세 가지 지표로 내한능력 평가를 수행하였다. 평가 결과, 미래 취약성은 2050s IPSL-CM5A-MR 시나리오에서 0.803까지 감소하였으며, 회복성과 위험성은 2070s IPSL-CM5A-MR 시나리오에서 0.003, 3,567.6 × 10⁶㎥까지 감소하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.622-628
• /
• 2016

As the suction pad-supporting bike carrier attached to a car may be subject to an excessive dynamic load due to random vibrations and centrifugal forces during driving, its structural safety is of great concern. To examine this, the finite-element method with a fluid-structure interaction should be used because the pressure on the pad bottom is changed in real time according to the fluctuations of the force or the moment applied on the pad. This method, however, has high computing costs in terms of modeling efforts and software expense. Moreover, the accuracy of computation is not easily guaranteed. Therefore, a new method combining the experiment and computation is proposed in this paper: the bottom pressure and contact area of the pad under varying loads was measured in real time and the acquired data are then used in the nonlinear elastic finite-element calculations. The computational and experimental results obtained with the product under development showed that the safety margin of the pad under the axial loading is relatively sufficient, whereas with an excessive rotational loading, the pad is vulnerable to separation or a local surface damage; hence, the safety margin may not be secured. The predicted contact behavior under the variation of the magnitude and type of the loading were in good agreement with the one from the experiment. The proposed analysis method in this study could be used in the design of similar vacuum pad systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.186-193
• /
• 2009

In this paper, we adopted E-MOLD patent technology in order to fabricate Prismless LGP(Light Guide Panel) fur cellular phone and estimate the transcription of injection-molded parts. Then, we manufactured the Ni stamper fur Prismless LGP using MEMS process. And the stamper was installed in the movable heated core which is the key part of a patented mold. Using this mold, we manufactured injection-molded plastic LGP parts with different mold temperatures so that we investigate effect of the temperature on the transcription of the parts. The CAE analysis was also conducted in order to compare with the experimental results. The transcription of LGP parts with various mold temperature displayed $100^{\circ}C$(25.0nm), $140^{\circ}C$(48.4nm), $180^{\circ}C$(52.1nm) and when compared with stamper(521Inm), transcription was superior at $180^{\circ}C$. According to the CAE results, moldability was improved as mold temperature ($50^{\circ}C{\sim}180^{\circ}C$) increased, but when filling time($1{\sim}2sec$) increases, it decreased at $160^{\circ}C$. And transcription and moldability were improved markedly at glass transition temperature($140^{\circ}C$).