• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.17-23
• /
• 2018

The purpose of this study is to suggest 100MPa class ultra high strength concrete mix design model applying neural network theory, in order to minimize an effort wasted by trials and errors method until now. Mix design model was applied to each of the 70 data using binary binder, ternary binder and quaternary binder. Then being repeatedly applied to back-propagation algorithm in neural network model, optimized connection weight was gained. The completed mix design model was proved, by analyzing and comparing to value predicted from mix design model and value measured from actual compressive strength test. According to the results of this study, more accurate value could be gained through the mix design model, if error rate decreases with the test condition and environment. Also if content of water and binder, slump flow, and air content of concrete apply to mix design model, more accurate and resonable mix design could be gained.

• Journal of Electrochemical Science and Technology
• /
• v.9 no.4
• /
• pp.276-281
• /
• 2018

High concentration of copper in mezcal, a representative Mexican spirituous alcoholic beverage, is a serious problem due to the damage that it may cause to human health. A cyclic voltammetry and square wave anodic stripping voltammetry study of copper (II) in three commercial mezcal samples based on glassy carbon electrode response was undertaken. The analysis was developed using a simulated matrix solution ($EtOH/H_2O$ (1:1), 0.1 M $LiClO_4$ and AcOH/AcONa 0.05 M/0.008 M), with Cu (II) concentrations in the range 0 - 1 ppm. Direct electrochemical analysis of mezcal samples was complicated by the presence of different organic compounds in the matrix. The analytical signal of Cu (II) in the spirituous was notably improved and the interferences caused by organic compounds were minimized, by diluting the mezcal samples 10% with $EtOH/H_2O$ (1:1) solution. An efficient quantification of Cu (II) was obtained from the calibration curve by the SWASV and using the internal standard method (Cd (II)) in commercial samples (1.2-6.7 ppm); the results were correlated satisfactorily with the values obtained by AAS.

• Architectural research
• /
• v.26 no.3
• /
• pp.83-92
• /
• 2024

The profound impact of earthquakes on human lives and the built environment emphasizes the substantial human and economic losses result-ing from structural collapses. Many researchers in this field highlight the longstanding societal challenge posed by earthquakes and under-score the imperative to minimize such losses. Over the decades, researchers have dedicated efforts to seismic design, focusing on improv-ing structural performance to mitigate earthquake-induced damages. This has led to the development of various structural analysis methods. In this research, a specific RC frame structure (401 Bldg.) at Kyungpook National University that is designed for educational purposes, serves as a representative case. This research employs SAP 2000 for simulation, aiming to assess the structural performance under seismic condi-tions, focusing on evaluating the structural behavior under different column orientations. This research utilizes RSA (Response Spectrum Analysis) to comprehensively examine parameters of displacement, base shear force, base moment, joint radians, and story drift. Referring to the results from RSA, this research also assesses the structural performance using LTHA (Linear Time History Analysis) by conducting synthetic frequency domain and synthetic time domain analyses based on the seismic wave from the Kobe 1995 earthquake (Abeno). Based on the findings from the discussions, this research is expected to be a valuable reference for structural design within seismic resistance and the seismic reinforcement of existing RC frame structures.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.225-242
• /
• 1997

This study is historical research on the relationship between the Changes of the Form of costume and the recognition of the beauty of the body from prehistorical period to Ch'ing Dynasty in Chinese female costume. In figure painting a significant point was to describe the spirit of the figure so Chinese painters were less interested in ideal body pro-portion or body shape than Westerns. But idealized beauty of the female body existed and changed keeping abreast with the form of costume in each period. In the prehistorical period Wemen fasten waist belt so enabled to distinguish upper part of the body from lower one. "Locust-forehead moth-eyebrows(蝗首蛾毛)" recorded in "the Book of odes(詩經)" was the canon of beaty and Wemen tried to make their forehead broad and square from Zhou Dynasty to the Wei Jin periods. From the age of Civil War to han Dynasty Slender waist was loved so waist was tightly fastened and hemline became broader. in the course of that time Plump body in big cloth with broad sleeve emerged but that was less significant than Tang Dynasty. During Wei Jin and the Southern/Northern Dynasty undergo disruption and division they admired Taoist images. Loose fitting style with handkerchief hemline and broad sash belt was prevailed while miserable life was reflected gaunt face and lean body. Suk Dynasty also preferred a slim and long body silhouette. The style was presented extremely high waist line long and narrow sleeve slim and long skirt which expressed dynamic and straight image. The culture of Tang Dynasty was open and diverse and that character enabled blod decolletate revealing body line by tight fitting and special make-up-Social background of uion and stabilization made female body extremely plump full face. full breast and hips with most erotic image. The period of Kaiyuan Tianbao fashioned mannish disguise presented androgynous image. Five Dynasty and Song Dynasty restored standard body type so upper garments concealed neck and bust high waist line lowered which represented refined and simple outfit. But another eroticism emerged as foot-binding in Song Dynasty. For the sake of covering up deformed top of the feet and ankle gaiters and arrow shaped shoes were devised. During Ming Ch'ing Dynasties body shape became more slim weak and young causing to escort instinct that reflects 'Lust' or 'Mundanity'.

• Clean Technology
• /
• v.27 no.3
• /
• pp.207-216
• /
• 2021

Major anthropogenic emissions of elemental mercury (Hg⁰) occur from coal-fired power plants, and the emissions can be controlled successfully using NH₃-SCR (selective catalytic reduction) systems with catalysts. Although the catalysts can easily convert the gaseous mercury into Hg²⁺ species, the reactions are greatly dependent on the flue gas constituents and SCR conditions. Numerous deNO_xing catalysts have been proposed for considerable reduction in power plant mercury emissions; however, there are few studies to date of elemental mercury oxidation using SCR processes with MW- and full-scale coal-fired boilers. In these flue gas streams, the chemistry of the mercury oxidation is very complicated. Coal types, deNO_xing catalytic systems, and operating conditions are critical in determining the extent of the oxidation. Of these parameters, halogen element levels in coals may become a key vehicle for obtaining better Hg⁰ oxidation efficiency. Such halogens are Cl, Br, and F and the former one is predominant in coals. The chlorine exists in the form of salts and is transformed to gaseous HCl with a trace amount of Cl₂ during the course of coal combustion. The HCl acts as a very powerful promoter for high catalytic Hg⁰ oxidation; however, this can be strongly dependent on the type of coal because of a wide variation in the chlorine contents of coal.

• Journal of applied mathematics & informatics
• /
• v.7 no.2
• /
• pp.507-516
• /
• 2000

In the present paper we consider a problem of choosing the rational way to carry on the metal processing (the problem of stochastic optimization) and the problem of determing the unknown characteristics of parameters described with random variables.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.358-360
• /
• 2004

웹 어플리케이션은 생명 주기가 짧고, 마르고 정확한 개발이 요구되므로 모델링 단계에서의 요소 분류 및 요소간의 제약조건을 정의할 필요가 있다. 이에 본 연구에서는 각 프레임과 페이지를 그 성격에 따라 집합 프레임과 구조 프레임, 내용 페이지와 구조 정보 페이지로 분류, 이를 바탕으로 요소간의 관계를 정의하였다. 웹 응용 모델링의 요소 분류를 통해 그에 따른 제약 조건을 서술할 수 있는데, 이를 통해 사소한 예측할 수 있는 오류를 피할 수 있고, 웹 응용의 기본적인 테스트 케이스로도 사용할 수 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.193-195
• /
• 2004

데이터베이스에 저장된 수많은 자료들을 사용자의 질의에 맞추어 웹상에서 표현해주는 것이 바로 리포팅 툴의 역할이다. 그에 관한 연구들로 BBQ(Blended Browsing and Querying), EASY BASE, QURSED(Querying and Reporting Semistructured Data)와 같은 여러 리포팅 툴들이 상용화되어 있다. 하지만 사용자가 보다 쉽고 직관적으로 XML 문서를 작성하고 관리할 수 있는 툴들은 미흡한 것이 사실이다. 이 논문에서는 XML과 XSL문서를 각각 그룹핑하고 직관적인 구조로 표현 해주며 사용자의 관점에 맞추어 XQuery를 지원하는 시스템을 설계 구현하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.54-58
• /
• 1990

홀 결모양(single mode) 광섬유로 조절가능한 곬진 짝짓게(tunable directional couplr)를 제작해 이중 공진 고리 간섭계(double resonant ing interferometer)를 구성했다. 이중 공진 고기 간섭계에 PZT(piezoelectric transducer)와 스피커를 각각 부착해서 위상 변조(phase modulation)를 동시에 시켜 나오는 출력 신호가 전산 시늉(computer simulation)을 통해 얻은 결과와 일치함을 보았으며, 이 출력 신호를 FFT(Fast Fourier Transformation)를 써서 분석했다. 이 결과로부터 동시에 두 가지 외부 변화를 감지할 수 있는지를 조사했다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1990.10a
• /
• pp.57-62
• /
• 1990

This paper describes the development and testing of a degitial controller for heat-ing ventilating and air-conditioning system. The controller uses properational-integral control action and self tunes to provide the Zigeler-Nichols when given a step input. The algorithm has been simulated fas static pressure.