낙석방지울타리는 도로절개면 상부에서 발생한 낙석의 도로 유입을 차단하기 위하여 설치되는 구조물로 국내 국도 절개면 중 70%이상 시공되어 있다. 이와 같이 도로 절개면의 재해예방을 위하여 범용적으로 사용되는 시설물로서 그 중요성이 매우 강조될 수 있으나 국내의 경우 아직까지 설계 및 시공에 대한 기준이 미흡하고 절개면의 높이, 경사도 등 특성을 고려하지 않은 단일 표준단면도에 의해 설계, 시공되어 이의 효율성에 한계가 있는 것이 사실이다. 따라서, 본 연구에서는 현장실험을 통해 낙석방지울타리의 흡수가능에너지를 파악하였다. 실험을 위하여 높이 20m, 경사 65도의 절개면을 선정하여 4개 규모의 콘크리트 볼(0.7, 1.3, 2.3, 4.3 톤)을 절개면 상부로부터 낙하시켜 낙석방지 울타리의 성능을 평가하였다. 본 논문은 시공완료된 절개면을 대상으로 현장실물실험을 통해 낙석운동에너지, 암반의 반발계수, 낙석방지울타리의 흡수에너지 등을 산정하여 절개면 특성별 낙석방지울타리의 설계에 필요한 기초 자료를 제공하고자 하였다. 현장실험을 통해 획득한 낙석방지울타리의 흡수가능에너지는 약 50kJ로 이는 약 0.4톤의 낙석이 10m의 높이에서 낙하할 때 발생하는 에너지와 동일하다.
실시간 응용 제품을 개발하기 위해 운영체제는 실시간 태스크의 시간 보장성(timeliness guarantee)이 지원되어야한다. 그러나 현재 대부분의 운영체제는 실시간 태스크의 시간적 제약조건(timing constraints)을 효율적으로 지원할 수 있는 방법을 제공해 주지 못하고 있다. 실시간 응용의 시간적 제약조건을 지원하기 위해서는 운영체제 커널 변경 방법과 미들웨어 방법이 있다. 본 논문에서는 운영체제 변경없이 잘 알려진 Real-time Object Model인 TMO에 근거한 미들웨어 접근 방식을 적용한다. 현재 TMO(Time-triggered Message-triggered Object) 모델을 기반으로 한 미들웨어로 다양한 운영체제 시스템 상에서 개발되어온 TMOSM(TMO Support Middleware)이 있다. 리눅스 기반의 TMOSM의 스케줄링 알고리즘은 효율적으로 실시간 스케줄링을 지원하지만 주기적인 실시간 태스크를 위해 몇 가지 고려해야할 사항들이 있다. 본 논문에서 는 주기적인 실시간 태스크를 효율적으로 처리할 수 있는 개선된 실시간 미들웨어 스케줄링 알고리즘을 제안하고 성능을 비교한다. 제안한 알고리즘은 실시간 미들웨어의 구조를 간단하게 함으로써 시스템 성능 향상과 주기적인 실시간 태스크의 적시성을 더욱더 보장함을 확인하였다.
인천 동춘동 척전 갯벌에 서식하는 대형 저서동물의 중요 우점종에 대한 시ㆍ공간적인 분포 패턴을 알아보기 위하여 1990년 9월부터 1992년 7월까지 2개년 동안 격월별로 현장조사를 실시하였다. 조사 기간 중, 총 111종, 25,491 개체가 채집되었고, Le Bris Index에 근거한 상위 15위의 우점종은 19,072개체의 밀도를 나타내 74.8%를 점유하였다. 백금갯지렁이과(Nephtyidae)의 다모류 3종과 칠게아과(Macrophthalminae)의 갑각류 2종은 동일한 속(genus)이 면서 조위와 퇴적상에 따라 뚜렷이 구분되는 서식처를 갖는 것으로 나타났다. 척전 갯벌의 중요 우점종은 다모류의 Heteromastus filiformis, 이매패류의 동죽(Mactra veneriformis), 맛조개(Solen strictus), 극피동물 해삼류의 가시닻해 삼(protankyra bidentata), 갑각류의 칠게(Macrophthalmus japonicus)등이었다. 5종의 중요 우점종에 대하여 공간에 따른 개체밀도를 비교한 결과, H. filiformis와 동죽은 통계적으로 유의한 차이가 없었으나(P>0.05), 맛조개, 칠게와 가시닻해삼은 유의한 차이가 있었다(p<0.001). 이것은 중요 우점종이 조위와 퇴적상에 따라 출현 개체밀도에서 공간적인 차이가 있음을 의미한다. H. flzyomis와 동죽은 조위와 퇴적상에 무관하게 갯벌의 전역에서 높은 밀도로 출현하였다. 그러나, 칠게는 펄이 많은 상부에서 밀도가 높았고, 맛조개, 가시닻해삼은 갯벌의 중ㆍ하부인 모래펄에서 우세한 밀도로 출현하여 이를 반영하고 있다.
The purpose of this study is to substitute water-based painting materials for the current solvent-based ones used in motor-repairing process to minimize the exposure of organic solvents to the painters. This study assessed the exposure of organic solvents to the painters using water-based and solvent-based painting materials and compared compositions, painting processes and the health hazards of the application of these alternative painting mate rials. The results of this study are as follows. 1. solvent-based painting materials used in motor-repairing process consist of various organic solvents, which consist primarily of toluene, xylene, ethyl benzene, ethyl methyl benzene, trimethyl benzene, ethyl acetate, butyl acetate, methyl isobutyl ketone, 2-ethoxy ethanol, 2-ethoxy ethyl acetate and toluene-2,4-diisocianate and the others. These organic solvents are known as health-hazardous substances. But water-based painting materials are high-solid, low-solvent one sand consist of such two organic solvents as 2-butoxy ethanol and 2-heptanone and the others. 2. The painters us ing solvent-based painting mate rials in motor-repairing process are exposed to various organic solvents which consist of toluene, xylene, ethyl acetate, butyl acetate, methyl isobutyl ketone, trimethyl benzene, 2-ethoxy ethanol, and 2-ethoxy ethyl acetate. But the painters using solvent-based ones are only exposed to 2-butoxy ethanol and 2-heptanone. 3. By using water-based painting materials in stead of solvent-based painting materials containing health-hazardous organic solvents, the exposure of such organic solvents in the painter's breathing zone can be largely prevented. 4. This study recommends water-based painting materials as substitutes for the current solvent-based ones used in motor-repairing process to minimize the exposure of organic solvents to the painters.
관개수(灌漑水)의 제한적 공급이 수도(水滔)의 생육(生育) 및 수량(收量)에 미치는 영향을 연구하기 위하여, 관수(灌水)의 공급상태를 담수(湛水)상태(2cm담수), 토양표면으로부터 지하수위 깊이 -17cm, -37cm, -57cm, -77cm, -97cm, -120cm, -145cm로 조절되는 포트에 삼남(三南)벼와 추청(秋晴)벼를 재배하였다. 1. 삼남(三南)벼와 추청(秋晴)벼 모두 담수(湛水)상태에서 재배된 것이 생육 및 수량이 가장 좋았다. 관수의 공급(供給)이 적어질수록 수도(水滔)의 생육 및 수량(收量)이 직선적으로 낮아졌다. 2. 삼남(三南)벼는 추청(秋晴)벼보다 내한성(耐旱性)이 더 강한 것으로 나타났다. 삼남(三南)벼는 지하수위 70cm 이상에서, 추청(秋晴)벼는 50cm 이상에서 수량(收量)에 미치는 생리적 장해(障害)가 심하게 나타나는 것으로 보였다. 3. 담수상태(湛水狀態)의 수도재배(水滔栽培)에서 출수(出穗)가 가장 빨랐고, 관수(灌水)의 공급량이 적어질수록 직선적으로 출수(出穗)시기가 늦어졌다. 삼남(三南)벼는 추청(秋晴)벼보다 평균 10일 정도 출수(出穗)가 빨랐다.
The effects of different protein sources (serum vs bovine serum albumin), growth factors (EGF and PDGF) and co-culture with various type of somatic cel1s (BOEC, MEF and BRL) on the in vitro development of in vitro matured / in vitro fertilized bovine oocytes were examined, and the viability of frozen/thawed embryos derived from IVM /IVF was examined. Cell numbers of blastocysts were also counted. In Experiment 1, CR$_1$aa with serum was superior to CR$_1$aa with BSA in producing morulae plus blastocysts from IVM /IVF oocytes(24.4% vs 30.4%, p>0.05). In Experiment 2, more morulae plus blastocysts(42.3%) were produced in CR$_1$aa containing long /ml EGF than in the control CR$_1$aa(33.3%). In Experiment 3, 2- to 8-cell embryos derived from IVM /IVF oocytes were randomly allotted to one of 4 culture groups : a) CR$_1$aa ; b) CR$_1$aa + ing /ml PDGF ; CR$_1$aa + Sng /ml PDGF ; CR$_1$aa + lOng /ml PDGF ; culture resulted in 21.3, 51.2, 41.4 and 45.9%(p<0.05), respectively, developing into morulae and blastocysts. In Experiment 4, 0 and Sng /ml PDGF added to CR$_1$aa coculture with BRL or BOEC yielded 47.5, 42.5, 33.8 and 41.6% morulae and blastocysts, respectively. In Experiment 5, the proportion of embryos into morulae and blastocysts was highest in CR$_1$aa with MEF coculture group(50.9%) compared to any other group(CR$_1$aa, 22.3%; CR$_1$aa+BRL, 32.9%; CR$_1$aa+BOEC, 33.8%, p>0.05). In Experiment 6, survival rate of blastocysts produced by in vitro fertilization when cryoprotectant was removed in 0.7M glycerol+0.7M sucrose and 0.7M sucrose solution for 10 min. after thawing at 2$0^{\circ}C$ (Exp. H, 58.8%) was slightly higher than when cryoprotectant was removed 10%, 6.7% and 3.3% glycerol for 10 min. after thawing at 37$^{\circ}C$ (Exp. I, 54.3%). These study indicate that growth factors and somatic cell co-culture can increase the proportion of embryos that develop into morulae and blastocysts without an increase in the cell number and frozen /thawed method employed this experiment was not different.
카드뮴(Cd)에 대한 지렁이의 독성한계를 결정하고, 생물적 농축능력을 평가함으로써, 잠재적 독성 원소가 높은 유기성 폐기물의 안전한 처리를 위한 vermicomposting의 이용가능성을 검토하였다. 우분에 첨가한 카드뮴 함량은 0 (대조구), 50, 100, 200, 400, 800, 1600 mg/kg의 7수준 이였다. 우분내 카드뮴 함량의 차이에 따른 지렁이의 생존율, 사육종료시의 개체당 평균생체중, 증체율, 난포수, 산자수 및 잔식량에서는 유의한 차이가 인정되지 않아서, 우분내 카드뮴 함량이 1600mg/kg까지는 지렁이의 생육에 별다른 영향을 미치지 않는 것으로 판단되었다. 생육형질간의 상호관계를 살펴본 결과, 생존율과 난포수간에는 0.1% 수준의 유의성이 인정되었고, 실험종료시 평균생체중과 잔식량간에는 5% 수준의 유의한 부(-)의 상관이 인정되었다. 지렁이 체내의 카드뮴 축적량은 카드뮴 함량 956.8~1116.6 mg/kg범위에서 최대 축적량인 283.8~396.2 mg/kg을 나타낸 후 점차 감소하였다.
Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.
본 논문에서는 패싯 분류에 기반하여 다차원 사용자 관점의 도메인 시소러스를 체계적으로 구축하고, 각 관점에 따라 시각화된 환경에서 시소러스를 브라우징, 항해 그리고 검색할 수 있는 다차원 관점객체기반 패싯 시소러스 시스템을 제안한다. 기존의 패싯 시소러스 시스템들과 달리, 본 시스템은 개념들간의 다각적인 상관 관계를 객체 지향 패러다임에 따라 자동으로 설정 구축할 수 있고, 브라우징과 항해를 통해 다차원 시소러스의 복잡한 개념 구조를 적절히 시각화할 수 있기 때문에, 시소러스의 유지 보수 관리가 용이하다. 다차원 브라우징 및 항해는 계층화된 패싯 용어들간의 조합으로 이루어진 패싯화된 시소러스를 필요시 동적으로 생성함으로써 이루어진다. 패싯화된 시소러스는 일종의 다차원 가상 시소러스 계층들로 볼 수 있다. 제안하는 방식에 의한 시소러스 자동 구축은 패싯들의 조합으로 새로운 차원의 시소러스를 용이하게 추가할 수 있기 때문에, 융통성 있는 시소러스 확장이 가능하고 대량의 시소러스 인스턴스들을 관점에 따라 적절한 해석을 부여하는 방식으로 구조화하기 때문에 개별적 사용자 관점에 부합되는 인스턴스들을 참조 질의에 의해 효율적으로 검색할 수 있다. 본 논문에서는 먼저 제안 시스템을 체계화하기 위한 모델을 정형화하고 이를 바탕으로 모델의 실용성을 입증하기 위해 그 프로토타입을 구현하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.