• Journal of the Korean Geotechnical Society
• /
• v.22 no.7
• /
• pp.73-83
• /
• 2006

The behaviour characteristics of Granular Compaction Pile (GCP) are mainly governed by the lateral confining pressure mobilized in the soft soil matrix to restrain the bulging failure of the granular compaction pile. The GCP method is most effective in soft soil with undrained shear strength ranging $15{\sim}50kPa$. However, the efficiency of this method reduces the more compressible soil conditions, which does not provide sufficient lateral confinement. In the present study, the GCP method reinforced with uniformly graded permeable concrete is suggested for the extension of application to the soft ground. Also, large triaxial compression tests are conducted on composite-reinforced soil samples for verification of availability of the suggested method and the settlement estimation method of the reinforced GCP is proposed. Furthermore, for the verification of the proposed method, predicted settlements by the proposed method are compared with results of 3-dimensional numerical analyses. In addition, parametric studies are performed together with detailed analyses of relevant design parameters.

• Journal of Adhesion and Interface
• /
• v.24 no.4
• /
• pp.124-130
• /
• 2023

For automotive coating agents that require little change in characteristics due to changes in external temperature, changes in noise characteristics due to changes in the external environment are very important. Therefore, soft polyurethane with excellent cold resistance, weather resistance, and abrasion resistance, and polysiloxane whose -OH terminated and side chains are modified with amines, are widely used. In this study, coating agents was prepared by adding water-born polyurethane, polysiloxane, ultra high molecular weight polypropylene (UHMWPP) powder, carbon black, and a matting agent to determine the effect of each resin component on noise. To study the effect of each resin component on noise, a coating agent was prepared by adding water-born polyurethane, polysiloxane, UHMWPP powder, carbon black, and a matting agent. The hard/soft segment ratio of water-born polyurethane, the main component of the coating, was 27.1%/72.9%, and the ratio of amino siloxanes to hydroxy-terminated polysiloxane was 2:7, which produced the least noise. The difference in friction coefficient was large when the friction body moves at high speed. When UHMWPP powder replaced SiO₂, noise decreased and gloss also decreased.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.76-81
• /
• 2024

Recently, agricultural methods are changing from experience-based agriculture to data-based agriculture. Changes in agricultural production due to the 4th Industrial Revolution are largely occurring in three areas: smart sensing and monitoring, smart analysis and planning, and smart control. In order to realize open-field smart agriculture, information on the physical and chemical properties of soil is essential. Conventional physicochemical measurements are conducted in a laboratory after collecting samples, which consumes a lot of cost, labor, and time, so they are quickly measured in the field. Measurement technology that can do this is urgently needed. In addition, a soil analysis system that can be carried and moved by the measurer and used in Korea's rice fields, fields, and facility houses is needed. To solve this problem, our goal is to develop and commercialize software that can collect soil samples and analyze the information. In this study, basic soil composition measurement was conducted using soil composition measurement sensors consisting of hardness measurement and electrode sensors. Through future research, we plan to develop a system that applies soil sampling using a CCD camera, ultrasonic sensor, and sampler. Therefore, we implemented a sensor and soil analysis UI that can measure and analyze the soil condition in real time, such as hardness measurement display using a load cell and moisture, PH, and EC measurement display using conductivity.

• Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.180-194
• /
• 2024

Mass mortalities of mud crab Scylla spp. larvae due to pathogenic Vibrio spp. outbreaks have frequently occurred in hatcheries. To overcome this problem, probiotics containing Bacillus subtilis bacteria are applied to inhibit pathogenic ones. We tested different doses of probiotic-containing B. subtilis (10⁸ CFU/g) on the Scylla tranquebarica larvae and investigated the microbiota population, including Vibrio. Water quality, larvae development, and crablet production were also monitored. The recently hatched larvae were grown in twelve conical fiber tanks filled with 200 L sterile seawater, with a salinity of 30 ppt at a stocking density of 80 ind/L. Four different doses of probiotics were applied in the larvae rearing, namely, A = 2.5 mg/L, B = 5 mg/L, C = 7.5 mg/L, and D = 0 mg/L, with three replicates. Next-generation sequencing analysis was used to obtain the abundance of microbes in the whole body of megalopa and the water media for larvae rearing after applying probiotics. Sixteen Raw Deoxyribonucleic Acid samples (eight from a whole body of megalopa extraction from four treatments of probiotics defined as A, B, C, D, and eight from water media extraction from four treatments of probiotic defined as E, F, G, H) were prepared. Then, they were sent to the Genetics Science Laboratory for NGS analysis. Ammonia, nitrite, total organic matter (TOM), larvae, and crablet production were monitored. Based on the Next-generation sequencing analysis data, the Vibrio spp. decreased significantly (p < 0.05) than control test (D) in megalopa-applied probiotics at the doses of 2.5 mg/L (A) and 7.5 mg/L (C) and in the water media for megalopa rearing treated with probiotics at the dosage of 5.0 mg/L (F). Ammonia in the zoea stage in B treatment and TOM in the zoea and megalopa stage in B and C treatments were decreased significantly (p < 0.05). It impacts the higher number of zoea survival in treatments B and C. Finally, it results in a significantly high crablet production in treatments B and C. Therefore, the dosage of 5 mg/L to 7.5 mg/L improves crablet S. tranquebarica production significantly.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.2
• /
• pp.69-76
• /
• 2015

BACKGROUND: Contamination of soils by heavy metals is the serious environmental problem. In particular, industrial processing is one of the main sources of heavy metal contamination. The objective of this study was to investigate the distribution characteristics of heavy metals in soils collected from industrial complex. METHODS AND RESULTS: In this study, the soil contamination and enrichment factor (EF) of heavy metals were investigated in three national industrial complexes such as Yeosu, Ulsan and Sihwa Banwal industrial complexes. The target heavy metals includes Cd, Cu, As, Hg, Pb, Cr, Zn, and Ni. The results showed that the contents of Cd, Hg, Pb, Zn and Ni in Yeosu and the contents of Cu, As and Cr in Sihwa Banwal were higher than in any other industrial complex. The results of principal component analysis(PCA) in Yeosu, Ulsan and Sihwa Banwal complex could be explained up to approximately 81.4, 69.1 and 70.9% by two factor, respectively. Enrichment factors of Cd, Pb and Zn in all the investigated industrial complexes were above 1.0 that was the value judged to be a high contamination. And EF of Cr was above 1.0 in Sihwa Banwal complex. EF of Zn in all sites was generally high from the other heavy metals. CONCLUSION: Therefore, soils maybe significantly affected by heavy metals (especially, Cd, Pb and Zn) present in the emissions from industrial complexes.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.164-176
• /
• 2012

In the present study, rapeseed flour (RSF), which is a by-product from the production of edible oil and biodiesel extracted from rapeseed, was used to develop alternative adhesives for the production of plywood panels. To examine the effects of the enzyme on the adhesive properties and formaldehyde emission of the RSF-based adhesive resins, three enzymes, such as cellulase (CEL), pectinase (PEC) and protease (ALC), were used either separately or together. As a crosslinking agent, PF prepolymers, which were prepared with 1.5, 1.8 and 2.1 mole formaldehyde and 1 mol phenol (1.8-, 2.1- and 2.4-PF), were added into the RSF hydrolyzates. The adhesive resins formulated with CEL- or CEL-PEC-RSF hydrolyzates and 1.8-F/P PF prepolymers exhibited excellent adhesive strengths and formaldehyde emission. The tensile shear strength and formaldehyde emission of the plywood panels bonded with the formulate resins were satisfied with the minimum requirement of the KS standard for ordinary plywood panels (0.6 N/$mm^2$). In addition, formaldehyde emissions of the plywood panels approached to that of E0 specified in the KS standard (0.5 mg/${\ell}$), and even had much better than those of commercial UF glue mixes. Overall, the use of RSF-based adhesive resins for the production of plywood panels might provide durable adhesive properties and an environmentally friendly substitute for petroleum-based adhesive resins. However, further researches - the increase of solid content of RSF-based adhesives for reducing press time and the microscopic observation of plywood specimen for identifying the relationship between tensile shear strength and the penetration of adhesives into wood structure - are required to commercialize the RSF-based adhesives.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.33 no.3
• /
• pp.95-118
• /
• 2020

Objectives: The objective of this in vivo study is to observe the analgesic effects or improvements of Gyejibokryeong-hwan aqueous extracts (GJBRHe) on the Primary dysmenorrhea (PD) in rats as compared to those of Indomethacin (IND). Methods: The rats were administered with estradiol benzoate for 10 days and oxytocin 1 hour after the last 10th administration of estradiol benzoate to make the primary dysmenorrhea rat model. Gyejibokryeong-hwan aqueous extracts 500, 250 and 125 mg/kg were orally administrated, for 10 days once a day. Then the changes on the body weights and gains during experimental periods, uterine weights and gross inspections, abdominal writhing response for analgesic activities, uterus lipid peroxidation (malondialdehyde (MDA) levels), antioxidant defense system - glutathione (GSH) contents, activities of superoxide dismutase (SOD) and catalase (CAT), Nuclear factor-κB (NF-κB) and Cyclooxygenase (COX)-2 mRNA expressions, were monitored with uterus histopathology and immunohistochemistry for tumor necrosis factor (TNF)-α and inducible nitric oxide synthase (iNOS). The results of Gyejibokryeong-hwan aqueous extracts were compared to those of Indomethacin adminstered rats. Results: As results of estradiol benzoate and oxytocin treatment, noticeable decreases of body weights and gains, uterus GSH contents, SOD and CAT activities, increases of abdominal writhing responses, uterus lipid peroxidation (MDA level), uterus weights, NF-κB and COX-2 mRNA expressions were observed with increases of TNF-α and iNOS immunolabeled cells, inflammatory cell infiltrations, congestion and enlargement of the uterus at gross and histopathological inspections. These means classic inflammatory and oxidative stress mediated primary dysmenorrhea are relatively well induced. However, these signs were favorably and dose-dependently inhibited by administration of three different dosages of Gyejibokryeong-hwan aqueous extracts, but lesser than those of Indomethacin. Conclusions: The results obtained in this study suggest that Gyejibokryeong-hwan aqueous extracts has favorable analgesic and refinement activities dose-dependently on the estradiol benzoate and oxytocin treatment-induced primary dysmenorrhea signs.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.1
• /
• pp.11-23
• /
• 2016

An ecological study on subtidal macrobenthic fauna was conducted off the Namhaedo Island, south coast of Korea from July 2012 to April 2013. A total of 247 species of macrobenthos occurred with a mean density of $1,027ind./m^2$ and a mean biomass of $148.7g/m^2$. Polychaetes was the richest and most abundant faunal group that comprised 37% in both total species number and density whereas echinoderms were biomass-dominant faunal group that accounted for 44% of the mean biomass. There was a seasonal variation in the species richness and abundance of macrobenthos with more species in winter and higher density in spring. Mean faunal density was relatively high at the stations near Namhaedo Island, but gradually decreased toward offshore stations. The most dominant species in terms of density was an amphipod species, Eriopisella sechellensis which occurred as a top ranker during three seasons except spring recorded the fourth rank. E. sechellensis showed its high density at the near shore stations of Namhaedo Island, but this species did not occur around the entrance of Gwangyang and Saryang Bays where Theora fragilis and Lumbrineris longifolia showed high densities. In particular, Tharyx sp., recorded high density between Gwangyang Bay entrance and offshore after Sea Prince oil spill, did not occur in the same area during this study period. The bottom temperature and sorting value of the surface sediments were highly correlated to the spatial distribution of macrobenthic fauna from the Bio-Env analysis. From the cluster analysis, the study area has five station groups with more similar faunal affinities from inner area toward offshore area. Based on the SIMPER analysis T. fragilis, Magelona japonica, E. sechellensis, L. longifolia and Paraprionospio cordifolia were mainly contributed to the classification of station groups. From the BPI, benthic communities in the entrance of Gwangyang Bay and Saryang Bay were considered to be in a slightly polluted condition in contrast to the normal healthy community at the offshore of Namhaedo Island. These results suggested that the benthic community of this area should be regularly monitored to assess the health status of this benthic ecosystem.

• Applied Biological Chemistry
• /
• v.21 no.2
• /
• pp.123-130
• /
• 1978

Asp. oryzae D and H strains were cultured in the wheat bran and Czapek-Dox liquid media containing garlic powder in order to investigate the effect of garlic on the enzyme production and growth of Asp. oryzae. The results obtained were as follows; 1. Wheat bran media containing 0.5 to 2% garlic powder yielded increased in acid protease activity of the Asp. oryzae D strain while the best activity appeared at 2 to 6% in alkaline protease and 0.5% in neutral protease. 2. The protease activities of Asp. oryzae H strain was similar to that of the control in wheat bran media containing 0.5 to 8% garlic powder, but the peak appeared at the garlic powder concentration of 30%. 3. Garlic powder increased the $\alpha$-and Glucoamylase activities of Asp. oryzae H strain. 4. Garlic powder inhibited the both Asp. oryzae strains from the cellulase production. 5. Czapek-Dex liquid media containing 0.5 to 6% garlic powder yielded increase in dry mycerial weight in comparison with the control, and the increament was much more in case of the Asp. oryzae H strain. 6. As the amount of the garlic powder added to the Czapek-Dox liquid media increased, the pH of the cultured media of Asp. oryzae D strains was on the decrease while the media of H strain increased. 7. As the amount of the garlic powder added increased, the acidity of the cultured Czapek-Dex media increased. 8. The growth rate of the two Asp. oryzae strains were remarkably inhibited and no growth appeared in wheat bran and Czapek-Dox media containing garlic powder more over 10%. 9. The utility rate of reducing sugar was the highest in the Czapek-Dox liquid media containing 1 to 2% garlic powder.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.467-491
• /
• 1995

In order to analyze the occlusin of intercuspation with maximun bite force, fifteen healthy adult subjects with the ages 23 to 27 were studied(Group1 ; 5-normal occlusion with Angle's Class1, Group2 ; 5-Angle's Class2 malocclusion, Group3 ; 5-Angle’s Class3 malocclusion). Head Position was fixed with occlusal plane paralleling to horizontal line and occlusal registration r cord was made with polyether rubber impression material(Ramitec, ESPECo. West Germany). After all subject were trained for maximum intercuspation at least 5 times, occlusal registration procedure was repeated for this study. Lower posterior rubber occlusal registration records were sliced with 1mm thickness using precision metal sliding channel(Hitachi Ind. Co., Japan). Gross sectional drawings were traced from occluding view of upper and lower posterior teeth on the rubber slices using digitizer, and superimposed for the determination of each drawing distance(Superimposed Rubber Pattern Method). Based on superimposed rubber pattern drawings, total area of occlusal view, sum of each area of the 5 divided occlusal contact provinces and its ratio, total area and number of occlusal contact area were determined to elucidate occlusal stability in the normal and abnormal occlusion groups. The data were analysed by t-test(p=0.05) to determine statistical significance. The obtained results were as follows : 1. Group1 showed the largest standard area with occlusal view of the lower posterior teeth and Group3 showed the smallest area. There was a significant difference between Group2 and Group3(p=0.025), and Gropu1 was not statistically different for both Group2 and Group3. 2. Means and ratio of the under 2.0mm area(D) and ratio showed $197.49mm^2$, 59.76% in Group1, $188,69mm^2$, 56.10% in Group2, and $174.23mm^2$, 55.76% in Group3. The results that Group1 has the most area/ratio and Group3 has the least area/ratio can be considered Group1 is the most advantageous for masticatory effective area, and Group3 is the least adnantageous. 3. Means and ratio of the under 1.0mm area(C) were $198.96mm^2$, 42.65% in Group1, 123.06$mm^2$, 46.58% in Group2, and $92.24mm^2$, 29.52% in Group3. These data means that Group1 is the most advantageous in terms of masticatory effective area and Group3 is the least. 4. Means and ratio of the under 0.5mm area(B) were $86.68mm^2$, 26.68% in Group1, $62.98mm^2$, 18.71% in Group2, and $36.44mm^2$, 11.66% in Group3. These can also be considered Group1 is the most advantageous for masticatory effective area and occlusal stability. 5. Means and ratio of the under 0.05mm area(A) were $30.92mm^2$, 9.21% in Group1, $14.31mm^2$, 4.25% in Group2, and $7.59mm^2$, 2.43% in Group3. The area ratio of the each subject group was(4.1) : (1.9) : (1)and the data of the under 0.05mm area has the intimate relationship with inter-group and intra-group data/ratio. 6. First molar showed the most occlusal contact points in all subject group and Group1 showed somewhat uniformly distributed occlusal contact point except first premolar. In Group2, all contact point in posterior teeth showed significantly reduced distribution except first molar. Group3 showed evenly distributed contace points in first and second molars.