• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.1-18
• /
• 2002

The purpose of this study is to investigate the relationship between costumes of court masque and the fashion trend at that time, by the analysis of the portraits. The period in this thesis is from Elizabeth I (1588-1603), until James I (1603-1625), when Inigo Jones was actively involved in court in masque, and when the traits of court masque began to appear in costume. The research material of this thesis is from the papers, costume design sketches, portraits and miniatures. As a result the costume of court masque which is the mixture of that of ancient Greece, Rome, middle age, and the exotic style of Ireland and Persian, had a great impact on the general fashion, and the unique pattern f costume became prevalent in the end of 16th and the early 17th century. This thesis might help us understand and special costume of that age and study the way how it come to have an influence on the fashion of the costume pertaining mainly to the privileged class.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.65-68
• /
• 2002

Distributed Generators (DG) are rapidly increasing and most of them are interconnected with distribution network to supply power into the network. Therefore, DG may make significant impacts on distribution system operation. protection, and control with respect to the voltage regulation, voltage flicker, harmonics, fault current levels, the losses of the network, etc. These impacts would be demerits for both of DG and distribution networks. And the operation of DG may be influenced by the abnormal grid condition such as disturbances occurred in the neighboring distribution feeders as well as the feeder directly connected with DG. This paper describes the influence of fault occurred in the interconnected power network on the DG operation and the impact of DG on the network load during the interruptions of utility power.

• International Journal of Highway Engineering
• /
• v.4 no.1 s.11
• /
• pp.171-181
• /
• 2002

Guss asphalt used in pavement of a steel deck bridge may cause severe stress and displacement on the bridge as it is treated using very high temperatures ranging from 220oC to 260cC. Therefore, it is critical to estimate the thermal effect of Guss asphalt on the steel deck bridge before the width and pattern of the unit portion are decided in order to minimize impact. In this study, we have conducted a series of numerical analysis of the upper road of Youngjong Grand Bridge, verified the feasibility of numerical value analysis by comparing the results with the data measured, and studied the thermal effects of Guss asphalt on the steel deck bridge according to temperature changes.

• Korean Journal of Remote Sensing
• /
• v.28 no.6
• /
• pp.597-609
• /
• 2012

Leaf area index (LAI) is important in explaining the ability of the crop to intercept solar energy for biomass production and in understanding the impact of crop management practices. This paper describes a procedure for estimating LAI as a function of image-derived vegetation indices from temporal series of IKONOS, Landsat TM, and MODIS satellite images using empirical models and demonstrates its use with data collected at Missouri field sites. LAI data were obtained several times during the 2002 growing season at monitoring sites established in two central Missouri experimental fields, one planted to soybean (Glycine max L.) and the other planted to corn (Zea mays L.). Satellite images at varying spatial and spectral resolutions were acquired and the data were extracted to calculate normalized difference vegetation index (NDVI) after geometric and atmospheric correction. Linear, exponential, and expolinear models were developed to relate temporal NDVI to measured LAI data. Models using IKONOS NDVI estimated LAI of both soybean and corn better than those using Landsat TM or MODIS NDVI. Expolinear models provided more accurate results than linear or exponential models.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.125-131
• /
• 2002

Surface defects in injection molded parts are due to the unsteady flow of polymer melt which are related to the geometries of cavity and gate, the operational conditions of injection and the rheological properties of polymer. In this study we have examined jetting phenomena in injection molding process for three kinds of PCs which have different molecular weight and structure, PBT and PC/ABS alloy with several injection speeds. We have used various cavity shapes that are tensile, flexural and impact test specimens with various gate and cavity thicknesses. Through this study we have observed that the formation of surface defect associated with jetting during filling stage in injection molding is strongly related to die swell. This means that the jetting is strongly affected by the elastic property rather than the viscous property in viscoelastic characteristics of molten polymer. Large die swell would eliminate jetting however, the retardation of die swell would stimulate jetting. In the point of mold design, reducing the thickness ratio of cavity to gate can reduce or eliminate jetting and associated surface defects regardless of magnitude of elastic property. It also enlarges process window that can produce steady flow of polymer melt in injection molding.

• Journal of the korean society of oceanography
• /
• v.37 no.3
• /
• pp.144-153
• /
• 2002

This is a review paper, assessing progress reported in a Special Issue (Prandle and Lane, 2000) of Coastal Engineering focusing on simulation of SPM in the North Sea, against issues over a diverse range of shelf seas and their coastal margins. The broad objectives of reproducing the characteristics of sediment fluxes off an open coast and relating these to tidal and wave forcing were achieved. However, accurate computation of these fluxes remains sensitive to largely empirical coefficients used in determining erosion and deposition rates. Bed roughness strongly influences both these coefficients and the associated near-bed current magnitudes (including wave impact thereon). Bed roughness can change significantly over a tidal cycle and dramatically over seasons or in the course of a major event. Accurate simulation of sediment fluxes on a day-to-day basis is constrained by dependency on the initial distribution of mobile sediments. The latter depends on rates and locations of original sources and the time history of preceding events. Remote sensing via aircraft could provide data for assimilation into such models to circumvent these constraints. The approaches described here can be readily applied to other coastal regions to indicate the likely distributions and pathways of known sediment sources. However quantitative simulations will require an associated observational programme. A subsequent stage is to understand the evolving balance between the forecasted sediment movement - the resulting morphological adjustments and thence modifications to the prevailing tidal current and wave regimes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.955-962
• /
• 2002

According to the trends of construction of large size vessel with high power, the natural frequencies of the bending modes of propeller blades have been lower than the past. Therefore, it is expected that the noise and vibration problems of the marine propeller are frequently occurred. As main issue of the propeller noise and vibration problem, the cavitation noise and singing noise due to the flow induced excitation of the bending modes of propeller blade in the high frequency range has been studied by the hydrodynamic researchers in the view point of the excitation force reduction. In this paper, the vibration mode characteristics of propeller with a large diameter in very large vessel are investigated by the vibration analysis of the finite element method using MSC/Nastran and the vibration measurement by the impact test on the propeller blade. According to the results, the natural frequencies of various blade bending modes in water entrained condition could be estimated from the natural frequencies taken by the measurement and free vibration analysis in the dry condition, and it could be estimated how the high frequency noise such as singing is generated from the blade bending modes.

• Information Systems Review
• /
• v.4 no.2
• /
• pp.237-255
• /
• 2002

In this study, we develop a four phase model of ERP implementation, which includes Chartering phase, Project phase, Shakedown phase, and Onward and upward phase. We then examine how the completeness of each phase influences the implementation success as well as the completeness of next phase. The results of this study show that project phase and onward and upward phase both have significant impacts on the implementation success. We also find that all relationships between the completeness of previous phase and next phase are significantly positive.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.13-22
• /
• 2002

Stink bug, Canthecona furcellatta (Hemiptera: Pentatomidae), is an important predator of silkworm larvae. Nymphs and adult attack the early stage silkworm larvae and causes about 10-15 per cent loss to silk industry. Synthetic organic pesticides has tremendous impact on minimizing the pest population but repeated and frequent use has created problems of residual toxicity, development of resistance to insecticides, pest resurgence and out break, phyto-toxicity and hazards to non target species and beneficial organism. Silkworms are very sensitive to pesticides; therefore, attempt has made to control the bug population through introduction of its native natural enemies in the silkworm-rearing field. Biological control has tremendous scope in sericulture because it is eco-friendly in nature and non-harmful farmers. Native natural enemies have been screened. Psix striaticeps, Trissolcus spp. and Telenomus spp. have been recorded as the most potential parasitoid against pentatomid bug. Life cycle, sex ratio and other various attributes of the par-asitoids have been recorded. The parasitization potential of the parasitoid is very high and they have the ability to discriminate between parasitized and unpar-asitized host. Mass propopagation technique under laboratory condition has been standaydized.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.67-71
• /
• 2002

The implications of temperature (25,30 and 35$^{\circ}C$) and relative humidity (60, 70 and 80%) on the pupation patterns were studied in the silkworm, Bombyx mori L. Larvae of two pure silkworm breeds, Pure Mysore (PM) and NB4D2 and their hybrid, PM ${\times}4 NB4D2 were reared under experimental conditions under natural day photoperiodic (LD 12: 12) condition. The three developmental marker events viz., larval ripening, pharate pupal formation and pupal formation occurred at or around the beginning of the photo-phase. The computed of mean vector (equation omitted), based on the circular statistics, also confirmed the above. However, the length of mean vector, r and the mean vector angular variance, s varied according to temperature and humidity conditions imposed; the variations being non-significant. Extreme temperature and humidity conditions, however, resulted in reduction in pupation rate (%) for PM and PM ${\times}4 NB4D2. On the other hand, in NB4D2 pupation percentage reduced below the economic level. The temperature and humidity together seems to exert synergic impact on the pupation rate at least in the silkworm Bombyx mori, L.