• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.135-142
• /
• 2007

MADYMO human model with the detail neck was used to investigate the reaction force of neck and neck injury from rear impact directions. In the validation simulation, head acceleration, thorax acceleration and the global kinematics of the head and neck were correlated well with experimental data. Acceleration data from three 15 km/h low speed car rear impact pendulum tests(rear-end, offset, oblique) were used to simulate the model. In the simulation results, the reaction force on the facet joint and discs in the oblique rear impact were higher than rear-end, offset rear impacts. Further research is still needed in order to neck injury analysis about different crash parameters.

• Computers and Concrete
• /
• 제14권5호
• /
• pp.563-575
• /
• 2014

Concrete which is a composite material is frequently used in construction works. Properties and behavior of concrete are significant under the effect of different loading cases. Impact loading which is a sudden dynamic one may have destructive effects on structures. Testing apparatuses are designed to investigate the impact effect on test members. Artificial Neural Network (ANN) is a computational model that is inspired by the structure or functional aspects of biological neural networks. It can be defined as an emulation of biological neural system. In this study, impact parameters as acceleration and impact force values of a reinforced concrete slab are obtained by using a testing apparatus and essential test devices. Afterwards, ANN analysis which is used to model different physical dynamic processes depending on several variables is performed in the numerical part of the study. Finally, test and predicted results are compared and it's seen that ANN analysis is an alternative way to predict the results successfully.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.503-507
• /
• 2004

The radiated sound pressure induced by low-velocity impact is obtained by solving the Rayleigh integral equation. This paper established the sound analysis procedure using impact analysis model. For structurally radiated noise, the sound field is directly coupled to the structural motion. Therefore the impact response should be analyzed. The impact response is computed using the spring-mass model. And the influence of damage on the sound pressure and impacted force history of laminated were investigated. The results show that both radiated sound pressure and impact force history are strongly influenced by damage on laminated.

• KDI Journal of Economic Policy
• /
• 제42권2호
• /
• pp.31-56
• /
• 2020

This study investigates the impact of the use of the main local languages in Burkina Faso (Moore, Dioula, Fulfulde) on labor force participation. Using Ethnologue language data, I compute the relative language distance reduction index, after which I use a probit/logit model and instrumental variable approach to account for language use policy endogeneity. This study finds that the use of the Moore language increases the likelihood of labor force participation by 36 percent, with a strong impact on women at 59 percent, nine times higher than men, and 38.3 percent for rural individuals, five times higher than individuals living in urban areas. The Dioula language exhibits comparable trends, while Fulfulde has a negative impact on individuals. The study recommends the use of local language(s) as official language(s) to improve labor force participation. However, a bilingual approach combining local and international language(s) will be of use to account for globalization and international competitiveness. The findings here may be of use to researchers and policymakers as part of their effort to increase the labor force participation rates of women and rural individuals. Moreover, this research has significant implications with regard to the implementation of language use policies in a variety of postcolonial language contexts.

• 한국건설순환자원학회논문집
• /
• 제8권4호
• /
• pp.590-595
• /
• 2020

본 연구에서는 해일표류선박의 충돌이 해일피난건물로 선정된 철근콘크리트 건축물의 안전성에 미치는 영향을 파악하기 위하여, 충돌속도, 선박의 질량 및 선박의 길이를 변수로 한 진자를 이용한 축소 충돌실험을 실시하여, 건축물의 응답에 영향을 미치는 최대 충돌력, 충돌시간, 충돌파형 형상, 반발계수 등에 대한 기본적인 물리량 변동추이를 상세히 평가하였다. 그 결과, 충돌파형 형상은 대부분의 실험결과에서 삼각형 분포가 나타났으나, 충돌실험체의 길이의 증가에 따라 사다리꼴에 가까워지는 것을 알 수 있었다. 이는 건축물의 응답에 영향을 미치는 충격량 (충돌력 파형의 면적)을 산정함에 있어 매우 중요한 결과이다. 또한 반발계수는 충돌속도의 대소에 관계없이 일정하나, 충돌체의 질량 및 길이에 의해 변화하며, 단위길이당 질량으로 정리하면 반발계수의 변동이 평가가능함을 알 수 있었다.

• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.129-138
• /
• 2022

One of the objectives to prevent building pounding between two adjacentstructures is to considerseparation distance or decrease relative displacement during seismic excitation. Although the majority of building codes around the world have basically suggested some equations or approximately recommended various distances between structuresto avoid pounding hazard, but a lot of reportsin zone of pounding have obviously shown thatsafety situation or economic consideration are not always provided due to the collisions between buildings and the cost of land, respectively. For this purpose, a dynamic MDOF model by having base isolation system is numerically considered and using various earthquake records, relative displacements are mathematically investigated. Different equations to determine the value of damping ratio are collected and the results of evaluations are listed for comparison among them to present a new equation for determination of impact damping ratio. Presented equation is depends significantly on impact velocity before and after impact based on artificial neural network, which the accuracy of them is investigated and also confirmed. In order to select the optimum equation, hysteresisloop of impact between base of building and rubber bumper is considered and compared with the hysteresis loop of each impact, calculated by different equations. Finally, using representative equation, the effect of thickness, number and stiffness of rubber bumpers are numerically investigated. The results of analysis indicate that stiffness and number of bumpers have significantly affected in zone of impact force while the thickness of bumpers have not shown significant influence to calculate impact force during earthquake. For instance, increasing the number of bumpers, gap size between structures and also the value of stiffness is caused to decrease impact force between models. The final evaluation demonstrates that bumpers are able to decrease peak lateral displacement of top story during impact.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.629-636
• /
• 2001

In order to investigate the possibility of impact punching in brittle materials, an experimental setup was developed. In the setup, a long bar as a punch was used to apply the impact load to the specimen plate and measure the applied impact force during the impact punching process. Impact punching tests with various shape of punches were performed in soda-lime glass and silicon wafer under a different level of contact pressure. The damage appearance after the impact punching was examined according to the applied contact pressure. The minimum contact pressure required for a complete punching in glass specimens without development of radial cracks around the punched hole was sought at each condition. The minimum contact pressure increased with increasing the thickness of specimens and decreasing the end radius of punches. The profile of impact forces was measured during the impact punching experiment, and it could explain well the behavior of the punching process in brittle material plates. The measured impact force increased with increasing the contact pressure applied to the plates.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.65-75
• /
• 2015

Among the destruction instances of half-through arch bridges, the shorter hangers are more likely to be ruined. For a thorough investigation of the hanger system durability, we have studied vehicle impact effect on hangers with vehicle-bridge coupling method for a half-through concrete-filled-steel-tube arch bridge. A numerical method has been applied to simulate the variation of dynamic internal force (stress) in hangers under different vehicle speeds and road surface roughness. The characteristics and differences in impact effect among hangers with different length (position) are compared. The impact effect is further analyzed comprehensively based on the vehicle speed distribution model. Our results show that the dynamic internal force induced by moving vehicles inside the shorter hangers is significantly greater than that inside the longer ones. The largest difference of dynamic internal force among the hangers could be as high as 28%. Our results well explained a common phenomenon in several hanger damage accidents occurred in China. This work forms a basis for hanger system's fatigue analysis and service life evaluation. It also provides a reference to the design, management, maintenance, monitoring, and evaluation for this kind of bridge.

• 국제물리치료학회지
• /
• 제2권1호
• /
• pp.222-228
• /
• 2011

With comparison of maximum vertical reaction force and lower limb on drop landing between normal and flat foot group, this study is to provide fundamental data of the prevention of injury and the treatment of exercise which are frequently occurred on flat foot group's drop landing. The surface electrodes were sticked on lateral gastrocnemius muscle, medial gastrocnemius muscle, tibialis anterior and the drop landing on a force plate of 40cm was performed with a normal group who had no musculoskeletal disease and a flat foot group of 9 people who had feet examinations. Vertical reaction force were significantly statistically different between two groups(p<.001). Muscle activity of lower limbs in all three parts were not statistically different but showed high tendency on average in the flat foot group. The flat foot group had difficulties in diversification of impact burden and high muscle activity. Therefore, it was suggested that muscular strengthening of knee joints and plantar flexions of foot joints which were highly affected in impact absorption will be required.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제4권3호
• /
• pp.316-321
• /
• 2004

In this paper, we have developed a new mounting head system for flip chip. The proposed head system consists of a macro/micro positioning actuator for stable force control. The macro actuator provides the system with a gross motion while the micro device yields fine tuned motion to reduce the harmful impact force that occurs between very small sized electronic parts and the surface of a PCB(printed circuit board). In order to show the effectiveness of the proposed macro/micro chip mounting system, we compared the proposed system with the conventional chip mounting head equipped with a macro actuator only. A series of experiments were executed under the mounting conditions such as various access velocities and PCB stiffness. As a result of this study, a satisfactory voice coil actuator as the micro actuator has been developed, and its performance meet well the specifications desired for the design of the chip mounting head system and show good correspondence between theoretical analysis and experimental results.