• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.387-398
• /
• 2002

The impact response and damage of CLAS panel was investigated experimentally. The facesheet material used was RO4003 woven-glass hydrocarbon/ceramic and the core material was Nomex honeycomb with a cell size of 3.2mm and a density of 96 kg/㎥. The shield plane used was RO4003 and 2024-T3 aluminum. Static indentation and impact test was conducted to characterize the type and extent of the damage observed in two CLAS panels, and the performance of antenna used in a wireless LAN system. Correlation of peak contact force, residual indentation and the delamination area shows impact damage of the panel with an aluminum shield plane is larger than that of the panel with RO4003 shield plane, although the former is more penetration resistant. The damage was observed by naked eye, ultrasonic inspection and cross sectioning. The shape and size of delamination was estimated by ultrasonic inspection, and the area of delamination linearly increases as impact energy increases. The performance of impact damaged antenna was estimated by measuring return loss and radiation pattern. It was revealed that the performance of antenna was related to the impact damage and there was a threshold that the performance of antenna fell as impact energy level changed. The threshold was between the impact energies of 1.5J and 1.75J.

• 한국정보통신학회논문지
• /
• 제4권3호
• /
• pp.697-703
• /
• 2000

임팩트이온화현상은 소자의 크기가 점점 작아지면서, 높은 에너지에 있는 hot carrier 전송 을 해석하기 위해 매우 중요하므로 소자의 시뮬레이션에 정확한 임팩트이온화모델이 필수적이다. 털 연구에서는 의사포텐셜방법을 사용하여 풀밴드모델을 구하고, 임팩트이온화율은 수정된 Keldysh 공식을 이용하여 유도하였다. 본 연구에서는 Gahs 임팩트이은화의 온도의존특성을 조사하기 위하여 Monte Carlo 시뮬레이터를 제작하여 임팩트이온화계수를 구하였다. 결과적으로, 임팩트이온화계수는 300K에서 실험값과 잘 일치하였다. 또한 에너지는 전계가 증가할수록 증가하고, 높은 온도에서는 포논 산란의 emission mode가 높기 때문에 에너지가 감소함을 알 수 있었다. 임팩트이온화의 대수 fitting 함수 식은 온도와 전계에 대해 2차식으로 표현하였다. 대수 fitting 함수의 오차는 대부분 5%이내에 머물렀다. 그러므로 대수식으로 표현된 임팩트 이온화계수는 온도에 의존함을 알았고, 임팩트이온화계수를 구하는데 시간을 절약할 수 있다.

• 환경영향평가
• /
• 제13권2호
• /
• pp.57-71
• /
• 2004

This study aims to review the environmental impact assessment systems of Japanese local governments, to compare its outcome with the systems of Korean local governments, and to suggest the development direction for the environmental impact assessment systems of Korean local governments based on the result. The study results showed that, first, due to distinction in the political systems of Japan and Korea, while Japan has bottom-up environmental impact assessment systems, Korea has topdown environment impact assessment systems. Second, although introduction of national systems on planning was put on hold as a future initiative, local governments including Tokyo and Saitama are experimenting evaluation procedures tailored to local features by legislating them as regulations. On the other hand, while 'prior environmental review system' was in effect as a national system, nothing was practiced at all by local governments. Third, in a total of 47 Japanese local governments, about 45 projects and 44 assessment items were added to local government environmental impact assessment only and designated as target projects and assessment items. Fourth, in both national and local environment impact assessment systems in Japan, screening procedures to determine assessment by separating into Type 1 projects and Type 2 projects and scoping procedures to discuss assessment items in advance were introduced and in effect. This Japanese EIA system may serve as a good reference to the Korean national and local government EIA systems.

• 한국운동역학회지
• /
• 제14권2호
• /
• pp.57-68
• /
• 2004

This study was to evaluate the consistency of the vertical force($F_z$) of the force platform and the impact force. Two experiments were performed. First, the force platform was vertically placed to hang to the wall. While the rotating iron body hit the force platform, $F_z$ was measured. Then $F_z$ was compared with the impact force of the rotating iron body that was precalculated by using the inertia moments and the rotating force. Second, six Taekwondo masters punched the force platform to show what a certain pattern the impart force has. They were asked to punch the target depending on target distances. The target distances were differed from the relative arm segment of subjects as 90%, 80%, 70%, 60%, and 50% (100% target distance equals the aim length of each subject). Pearson's correlations were used between $F_z$ and the impact force. Also the linear regression was also performed to show the linearity. At the first experiment, $F_z$ and the impact force had much correlations and showed linear characteristics. Therefore, $F_z$ could be regarded as the impact force. At the second experiment, the strongest impact force was measured at the target distance of 80% and the time taken to the maximum impact force was within 0.02 seconds. The result of this study recommends that it can help the comparative study between the impact forces and other hitting sports.

• 대한교통학회지
• /
• 제18권4호
• /
• pp.107-115
• /
• 2000

본 논문에서는 자동차 충돌사고 재구성에 직접 적용이 가능하도록, 주어지는 두 차량의 충돌후 속도, 차량에 관한 간단한 물성치와 기하학적 상대 위치들에 근거하여 충돌 직전 속도 성분들을 계산하는 소위 충돌 거동에 대한 역해석 방법을 제시한다. 또한, 제시하는 역해석 방법이 실용적 의미를 가지게 하기 위해서, 충돌 후 조건들로부터 반발계수와 역적비에 대한 적절한 추정 방법과 더불어 충돌 변형으로부터 유추할 수 있는 충돌 과정동안의 에너지 손실에 근거한 역해석 방안도 포함한다. 실차충돌 실험자료의 분석 결과에 따르면, 역적-운동량이론에만 근거한 역해석 결과뿐만 아니라 에너지 손실에 근거한 역해석 결과도 실험 결과와 좋은 일치를 보여주고 있다 강체역학의 범주내에서 역해석을 수행할 수 없는 공통속도 조건과 같은 경우나 반발계수에 관한 추정결과가 적절하지 않게 되는 등 단지 역적-운동량이론만을 이용한 해석 결과가 미흡한 경우에는 에너지 손실에 근거한 역해석 방법을 보완적으로 활용할 수 있을 것이다. 본 논문에서 제시한 충돌 과정 역해석 결과는 자동차충돌 해석 결과 및 충돌 전·후 거동에 대한 역미끄럼 해석 결과와 유기적으로 결합하여 자동차 충돌 사고 전 과정에 대한 직접적인 역해석을 수행할 수 있는 사고 재구성 패키지의 개발을 기대할 수 있다.

• 한국음향학회지
• /
• 제22권2호
• /
• pp.88-95
• /
• 2003

본 논문에서는 바닥충격음의 감성적 상하한치를 기준으로 바닥충격음의 감성적 평가등급을 설정하기 위하여 바닥충격음 레벨에 따른 피험자의 주관적 반응을 현장 청감실험을 통하여 조사하였다. 표준 바닥충격원인 중량, 경량 충격음과 현재 일본에서 신 중량충격원으로 제안되고 있는 고무공충격음, 그리고 실제 충격음 (Jumping)을 대상으로 청감실험을 실시하였으며 청감실험에 사용된 주관적 반응의 평가척도로는 일본 건축학회에서 활용되고 있는 3개의 평가척도와 소음평가어휘를 활용한 평가척도를 사용하였다. 청감실험 결과, 바닥충격음 레벨에 따른 주관적 반응의 관계는 1차 회귀식으로 나타났으며, 감성적 하한치가 중량충격음의 경우 역A특성 가중 바닥충격음 레벨 (L/sub i, Fmax, AW/)이 46㏈, 경량충격음의 경우 역A특성 가중 규준화 바닥충격음 레벨 (L'/sub n, AW/)이 56㏈로 나타났다. 최종적으로 청감실험 결과에서 도출된 감성적 하한치의 기준으로 총 3등급의 평가등급이 설정되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.460-464
• /
• 2000

임팩트이온화현상은 소자의 크기가 점점 작아지면서, 높은 에너지에 있는 hot carrier 전송을 해석하기 위해 매우 중요하므로 소자의 시뮬레이션에 정확한 임팩트이온화모델이 필수적이다. 본 연구에서는 의사포텐셜방법을 사용하여 full 밴드모델을 구하고, 임팩트이온화율은 수정된 Keldysh 공식을 이용하여 유도하였다. 본 연구에서는 GaAs 임팩트이온화의 온도와 전계에 대한 의존특성을 조사하기 위하여 Monte Carlo 시뮬레이터를 제작하여 임팩트이온화계수를 구하였다. 결과적으로, 임팩트이온화계수는 300K에서 실험 값과 잘 일치하였다. 또한 에너지는 전계가 증가할수륵 증가하고, 높은 온도에서는 포논산란의 emission mode가 높기 때문에 에너지가 감소함을 알 수 있었다. 임팩트 이온화의 대수 fitting 함수 식은 온도와 전계에 대해 2차 식으로 표현하였다. 대수 fitting 함수의 오차는 대부분 5%이내에 머물렀다. 그러므로 대수 식으로 표현된 임팩트이온화계수는 온도와 전계에 의존함을 알았고, 온도와 전계에 의존하는 임팩트이온화계수를 구하는데 시간을 절약할 수 있다

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.111-116
• /
• 2018

The environmental impacts of a 1 kW polymer electrolyte membrane fuel cell (PEMFC) system are quantitatively assessed by performing a Life Cycle Assessment (LCA) study. A PEMFC system produces electricity and heat simultaneously, so an appropriate allocation of associated inputs and outputs is performed between the electricity and heat produced. The environmental impacts of the PEMFC system on the impact categories such as global warming (GW), abiotic depletion (AD), acidification (AC), and eutrophication (EU) are assessed from the life cycle impact assessment. The impact indicator results of the impact assessment on these impact categories are obtained as $3.70E-01kg\;CO_2\;eq./kWh$, 1.86E-03 kg Sb eq./kWh, $4.09E-04kg\;SO_2\;eq./kWh$, and $1.88E-05kg\;PO_4{^{3-}}/kWh$, respectively. For all impact categories studied the most influential stage is the operation stage, which accounts for 98.8%, 98.7%, 70.3%, and 62.3% of the total impact on GW, AD, AC, and EU, respectively. For the impact categories of AD, AC, and EU, most of the environmental impacts during the operation stage is attributed to the production of city gas. However, for the impact category of GW, $CO_2$ emission from the reforming process of city gas is the main reason for the largest contribution of the operation stage to the total impact results.

• International Journal of Quality Innovation
• /
• 제6권3호
• /
• pp.173-189
• /
• 2005

A life-cycle assessment (LCA) is based on the attention given to the environmental protection and concerning the possible impact while producing, making, and consuming products. It includes all environmental concerns and the potential impact of a product's life cycle from raw material procurement, manufacturing, usage, and disposal (that is, from cradle to grave). This study assesses the environmental impact of the ultra pure water process of semiconductor manufacturing by a life-cycle assessment in order to point out the heavy environmental impact process for industry when attempting a balanced point between production and environmental protection. The main purpose of this research is studying the development and application of this technology by setting the ultra pure water of semiconductor manufacturing as a target. We evaluate the environmental impact of the Precoat filter process and the Cation/Anion (C/A) filter process of an ultra pure water manufacturing process. The difference is filter material used produces different water quality and waste material, and has a significant, different environmental influence. Finally, we calculate the cost by engineering economics so as to analyze deeply the minimized environmental impact and suitable process that can be accepted by industry. The structure of this study is mainly combined with a life-cycle assessment by implementing analysis software, using SimaPro as a tool. We clearly understand the environmental impact of ultra pure water of semiconductor used and provide a promotion alternative to the heavy environmental impact items by calculating the environmental impact during a life cycle. At the same time, we specify the cost of reducing the environmental impact by a life-cycle cost analysis.

• The Journal of the Acoustical Society of Korea
• /
• 제15권1E호
• /
• pp.5-19
• /
• 1996

This paper proposes a loose part monitoring system (LPMS) design with a signal processing method based on fuzzy logic. Considering fuzzy characteristics of metallic impact waveform due to not only interferences from various types of noises in an operating nuclear power plant but also complex wave propagation paths within a monitored mechanical structure, the proposed LPMS design incorporates the comprehensive relation among impact signal features in the fuzzy rule bases for the purposes of alarm discrimination and impact diagnosis improvement. The impact signal features for the fuzzy rule bases include the rising time, the falling time, and the peak voltage values of the impact signal envelopes. Fuzzy inference results based on the fuzzy membership values of these impact signal features determine the confidence level data for each signal feature. The total integrated confidence level data is used for alarm discrimination and impact diagnosis purposes. Through the perpormance test of the proposed LPMS with mock-up structures and instrumentation facility, test results show that the system is effective in diagnosis of the loose part impact event(i.e., the evaluation of possible impacted area and degree of impact magnitude) as well as in suppressing false alarm generation.