• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.383-389
• /
• 2011

At the design stage, it is very important to know the ship maneuvering characteristics from the view point of ship performance and for the safety of navigation. IMO only gives some criteria for ships in full load even keel condition. However, the ship generally is operated not only in full load condition but also in half load condition or ballast condition. Therefore we must estimate the ship maneuvering in different loading condition to ensure that the ship will satisfy with IMO rules and navigate safely in every condition. In this paper, we have investigated the maneuvering characteristics of a ship by simulation and experiments with real ship. By comparing with the results of simulation, the real ship tests conform with simulation test and previous researches. Therefore, the method base on real data is well done to estimate the ship maneuvering in different loading conditions. The change of ship's manoeuverability accoriding to ship's operation conditions was estimated.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1162-1167
• /
• 2006

The discharge of ballast water from the marine vessel without proper treatment causes the ecological disruption. Therefore, International Marine Organization(IMO) has the plan to force the proper treatment of ballast water before its discharge to open sea. To satisfy the IMO's criteria, several processes such as filtration, UV irradiation, and ozonation etc., were introduced. Since the disinfection of ballast water should be conducted within very short hydrolic retention time, electrochemical treatment can be a promissing process. The DSA(dimensional stable anode) electrode for the electrochemical treatment was prepared by thermal deposition method. The disinfection rate of microorganisms increased with the increasing current density and reaction time under low pH condition. The morphology of sterilized microorganisms was shown by SEM and Microscopy.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.2
• /
• pp.55-65
• /
• 2020

A review of the 2nd generation of intact stability by the International Maritime Organization is performed. The main issues with the new stability criteria are reviewed. In particular, the physical background and related mathematical formulations of the pure loss of stability and parametric roll are summarized. Based on a literature review, benchmark calculation results for 17 different types of ships are discussed, and the final results are in excellent agreement with our physical expectations. Some relatively serious design problems are found in the application of the new stability criteria to sample ships built in Korea, and possible technical solutions are proposed, which have to be improved in the coming years.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.71-78
• /
• 1989

A series of total loss of log carriers of G/T 4000 class which are engaged in EAST-SOUTH ASIAN route have been reported during the last decade. The casualties has been investigated in depth to draw the efficient means of safety. The results of this investigation, which are described in this paper, have been submitted to INTERNATIONAL MARITIME ORGANIZATION(IMO) by KOREAN GOVERNMENT in cooperation with the KOREAN REGISTER OF SHIPPING to request the revision of stability criteria of ship carrying timber deck cargoes.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.69-77
• /
• 2000

This study was a part of FSA study which was initiated by IMO and was applied to hatchway watertight integrity of bulk carriers. Hazards which were involved in high risk level were identified as follows. Ship Operation out of Design Criteria(Hatch Coaming Damage) and Poor Maintenance & Inspection(Securing Arrangement Damage). The potential risk was calculated by risk analysis and risk control option was made to reduce potential risk. The potential risk was about U$60,000/ship-year and could be reduced to about U$30,000/ship-year by applying RCO 1(Advanced system directly related to Hatchway Security). In addition, effectiveness of RCOs was shown by cost benefit assessment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.270-276
• /
• 2019

According to the International Maritime Organization (IMO) 2020 Regulation, ships operating outside designated emission control areas (ECA) have to use low-sulfur oil with a sulfur content of 0.5% or less by January 2020. To minimize the consumption of high-priced low-sulfur oil, it is urgent to introduce efficient energy-saving devices (ESD), and contra-rotating propeller (CRP) systems are well known to be the most effective one. The shafting system that drives a CRP is composed of an inner shaft and an outer one and has a mutually influential system that is much more complex and heavier than a general shafting system. An initial design was carried out to install a CRP system for the first time in Korea. The purpose of this study is to verify whether the journal bearing meets the classification's design criteria through a bearing reaction force analysis for the classification's approval of the initial design. It is ideal for the thrust of the propeller to act on the center of the shaft, but thrust eccentricity occurs due to the uneven wake caused by the stern shape. Load conditions were applied while considering thrust eccentricity to perform the shaft analysis, and the results were compared with the classification's criteria.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.302-310
• /
• 2018

Despite the accident rate for fishing vessels accounts for 70% of all maritime accidents, few studies on such accidents have been done and most of the them mainly focus on causes and mitigation policies to reduce that accident rate. Thus, this risk analysis on sea accidents is the first to be performed for the successful and efficient implementation of accident reducing measures. In risk analysis, risk is calculated based on the combination of frequency and the consequence of an accident, and is usually expressed as a single number. However, there exists uncertainty in the risk calculation process if one uses a limited number of data for analysis. Therefore, in the study we propose a probabilistic simulation method to forecast risk not as a single number, but in a range of possible risk values. For the capability of the proposed method, using the criteria with the ALARP region, we show the possible risk values spanning across the different risk regions, whereas the single risk value calculated from the existing method lies in one of the risk regions. Therefore, a decision maker could employ appropriate risk mitigation options to handle the risks lying in different regions. For this study, we used fishing vessel accident data from 1988 to 2016.

• Journal of Korea Trade
• /
• v.23 no.2
• /
• pp.59-75
• /
• 2019

Purpose - The International Maritime Organization (IMO) has promulgated strict regulations on emissions in the maritime shipping industry. LNG (Liquefied Natural Gas) is, therefore, recognized as the optimal fuel alternative solution. The aim of this study is to select the most suitable location for an LNG bunkering port. This is formulated as a multiple-criteria ranking problem regarding four candidate ports in South Korea: the ports of Busan, Gwangyang, Incheon, and Ulsan. Design/Methodology/approach - An analysis employing the Consistent Fuzzy Preference Relation (CFPR) methodology is carried out, and the multiple-criteria evaluation of various factors influencing the location selection, such as the average loading speed of LNG, the number of total ships, the distance of the bunkering shuttle, and the degree of safety is performed. Then, based on the combination of both the collected real data and experts' preferences, the final ranking of the four ports is formulated. Findings - The port of Busan ranks first, followed by the ports of Gwangyang and Ulsan, with the port of Incheon last on the list. Originality/value - The Korean government could proceed with a clear vision of the candidate ports' ranking in terms of the LNG bunkering terminal selection problem.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.19-27
• /
• 2017

In spite of adoption of Intact Stability Code Part A as mandatory, the accidents have been occurred frequently caused by dynamic stability. Therefore International Maritime Organization (IMO) is revising the Intact Stability Code to prevent the cause of accidents. The result of 4th meeting of Sub-committee on Ship Design and Construction (SDC), five mode of the cause was defined and establishing each draft regulations. We consider physical background, mathematical description, draft regulations for five failure mode and sample calculations for ships built by STX Offshore & Shipbuilding.

• Ocean Systems Engineering
• /
• v.4 no.2
• /
• pp.117-136
• /
• 2014

The increased interest in the design of energy efficient ships post IMO regulation on enforcing EEDI has encouraged researchers to reevaluate the numerical methods in predicting important hull design parameters. The prediction of added resistance and stability of ships in the rough sea environment dictates selection of ship hulls. A 3D panel method based on Green function is developed for vessel motion prediction. The effects of parametric instability are also investigated using the Volterra series approach to model the hydrostatic variation due to ship motions. The added resistance is calculated using the near field pressure integration method.