• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.268-277
• /
• 2014

This study assessed microbiological hazards at postharvest stage of dropwort farms (A, B, C, D, E, F, G, H, I) located in 4 different areas in Korea. The samples were assessed for sanitary indication bacteria (total aerobic bacteria, coliform, and Escherichia coli) and pathogenic bacteria (Escherichia coli O157:H7, Listeria monocytogenes, Staphylococcus aureus and Bacillus cereus). Total aerobic bacteria and coliform in 9 dropwort farms were detected at the levels of 0~7.00 and 0~4.25 log CFU/g, mL, of $100cm^2$. In particular, microbial contamination in worker's hand showed higher than cultivation environment factors. Escherichia coli was detected in several farms of soil, irrigation water, washing water and worker's hand and also, dropwort in these farms was contaminated with E. coli (positive reaction). In case of pathogenic bacteria, B. cereus was detected at the highest levels in soil. S. aureus was detected qualitatively from only one sample of dropwort washed by water. E. coli O157:H7 and L. monocytogenes were not detected. Although dropwort pass through 2 process (trimming and washing), the microbial contamination was not differ significantly before and after which indicates that current washing system was not effect on reduction of microorganism. From these results, the postharvest environment and workers have been considered as cross-contamination factors. Thus, processing equipments and personal hygiene should be managed to reduce the microbial contamination of dropwort. Accordingly management system such as good agricultural practices (GAP) criteria is needed for the safety of dropwort

• Journal of Nutrition and Health
• /
• v.52 no.6
• /
• pp.515-528
• /
• 2019

Purpose: This study examined the immunological activity and optimized the mixture conditions of Sargassum horneri (S. horneri) extracts in vitro and in vivo models. Methods: S. horneri was extracted using three different methods: hot water extraction (HWE), 50% ethanol extraction (EE), and supercritical fluid extraction (SFE). Splenocyte proliferation and cytokine production (Interleukin-2 and Interferon-γ) were measured using a WST-1 assay and enzyme-linked immunosorbent assay, respectively. The levels of nitric oxide and T cell activation production were measured using a Griess assay and flow cytometry, respectively. The natural killer (NK) cell activity was determined using an EZ-LDH kit. Results: Among the three different types of extracts, HWE showed the highest levels of splenocyte proliferation and cytokine production in vitro. In the animal model, three different types of extracts were administrated for 14 days (once/day) at 50 and 100 mg/kg body weight. HWE and SFE showed a high level of splenocyte proliferation and cytokine production in the with and without mitogen-treated groups, whereas EE administration did not induce the splenocyte activation. When RAW264.7 macrophage cells were treated with different mixtures (HWE with 5, 10, 15, 20% of SFE) to determine the optimal mixture ratio of HWE and SFE, the levels of nitric oxide and cytokine production increased strongly in the HWE with 5% and 10% of SFE containing group. In the animal model, HWE with 5% and 10% of SFE mixture administration increased the levels of splenocyte proliferation, cytokine production, and activated CD4⁺ cell population significantly, with the highest level observed in the HWE with 5% of SFE group. Moreover, the NK cell activity was increased significantly in the HWE with 5% of SFE mixture-treated group compared to the control group. Conclusion: The optimal mixture condition of S. horneri with immune-enhancing activity is the HWE with 5% of SFE mixture. These results confirmed that the extracts of S. horneri and its mixtures are potential candidate materials for immune enhancement.

• Allergy, Asthma & Immunology Research
• /
• v.10 no.6
• /
• pp.648-661
• /
• 2018

Purpose: Pollen-food allergy syndrome (PFAS) is an immunoglobulin E (IgE)-mediated allergy in pollinosis patients caused by raw fruits and vegetables and is the most common food allergy in adults. However, there has been no nationwide study on PFAS in Korea. In this study, we investigated the prevalence and clinical characteristics of PFAS in Korea. Methods: Twenty-two investigators participated in this study, in which patients with allergic rhinoconjunctivitis and/or bronchial asthma with pollen allergy were enrolled. The questionnaires included demographic characteristics, a list of fruits and vegetables, and clinical manifestations of food allergy. Pollen allergy was diagnosed by skin prick test and/or measurement of the serum level of specific IgE. Results: A total of 648 pollinosis patients were enrolled. The prevalence of PFAS was 41.7% (n = 270). PFAS patients exhibited cutaneous (43.0%), respiratory (20.0%), cardiovascular (3.7%) or neurologic symptoms (4.8%) in addition to oropharyngeal symptoms. Anaphylaxis was noted in 8.9% of the PFAS patients. Seventy types of foods were linked to PFAS; e.g., peach (48.5%), apple (46.7%), kiwi (30.4%), peanut (17.4%), plum (16.3%), chestnut (14.8%), pineapple (13.7%), walnut (14.1%), Korean melon (12.6%), tomato (11.9%), melon (11.5%) and apricot (10.7%). Korean foods such as taro/taro stem (8.9%), ginseong (8.2%), perilla leaf (4.4%), bellflower root (4.4%), crown daisy (3.0%), deodeok (3.3%), kudzu root (3.0%) and lotus root (2.6%) were also linked to PFAS. Conclusions: This was the first nationwide study of PFAS in Korea. The prevalence of PFAS was 41.7%, and 8.9% of the PFAS patients had anaphylaxis. These results will provide clinically useful information to physicians.

• Korean Journal of Dental Materials
• /
• v.44 no.3
• /
• pp.207-216
• /
• 2017

The effect of cooling rate on precipitation hardening of a Pd-Cu-Ga-Zn metal-ceramic alloy during porcelain firing simulation was investigated and the following results were obtained. When the cooling rate was fast (Stage 0), the hardness of the alloy increased at each firing step and the high hardness value was maintained. When the cooling rate was slow (Stage 3), the hardness was the highest at the first stage of the firing, but the final hardness of the alloy after complete firing was lower. The increase in hardness of the specimens cooled at the cooling rate of Stage 0 after each firing step was caused by precipitation hardening. The decrease in hardness of the specimens cooled at the cooling rate of Stage 3 after each firing step was attributed to the coarsening of the spot-like precipitates formed in the matrix and plate-like precipitates. The matrix and the plate-like precipitates were composed of the $Pd_2(Cu,Ga,Zn)$ phase of CsCl-type, and the particle-like structure was composed of the Pd-rich ${\alpha}$-phase of face-centered cubic structure. Through the porcelain firing process, Cu, Ga, and Zn, which were dissolved in Pd-rich ${\alpha}$ particles, precipitated with Pd, resulting in the phase separation of the Pd-rich ${\alpha}$ particles into the Pd-rich ${\alpha}^{\prime}$ particles and ${\beta}^{\prime}$ precipitates composed of $Pd_2(Cu,Ga,Zn)$. These results suggested that the durability of the final prosthesis made of the Pd-Cu-Ga-Zn alloy can be improved when the cooling rate is fast during porcelain firing simulation.

• Ultrasonography
• /
• v.32 no.2
• /
• pp.132-142
• /
• 2013

Purpose: The purpose of this study is to investigate the correlations of various kinetic parameters derived from the time intensity curve in a xenograft mouse model injected with a prostate cancer model (PC-3 and LNCaP) using an ultrasound contrast agent with histopathologic parameters. Materials and Methods: Twenty nude mice were injected with human prostate cancer cells (15 PC-3 and five LNCaP) on their hind limbs. A bolus of $500{\mu}L$ ($1{\times}10^8$ microbubbles) of second-generation US contrast agent (SonoVue) was injected into the retroorbital vein. The region of interest was drawn over the entire tumor. The time intensity curve was acquired and then fitted to a gamma variate function. The maximal intensity (A), time to peak (Tp), maximal wash-in rate (washin), washout rate (washout), area under the curve up to 50 sec ($AUC_{50}$), area under the ascending slope ($AUC_{in}$), and area under the descending slope ($AUC_{out}$) were derived from the parameters of the gamma variate fit. Immunohistochemical staining for VEGF and CD31 was performed. Tumor volume, the area percentage of VEGF stained in a field, and the count of CD31 (microvessel density, MVD) positive vessels showed correlation with the parameters from the time intensity curve. Results: No significant differences were observed between the kinetic and histopathological parameters from each group. MVD showed positive correlation with A (r=0.625, p=0.003), washin (r=0.462, p=0.040), $AUC_{50}$ (r=0.604, p=0.005), and $AUC_{out}$ (r=0.587, p=0.007). Positive correlations were also observed between tumor volume and $AUC_{50}$ (r=0.481, p=0.032), washin (r=0.662, p=0.001), and $AUC_{out}$ (r=0.547, p=0.012). Washout showed negative correlations with MVD (r=-0.454, p=0.044) and tumor volume (r=-0.464, p=0.039). The area percentage of VEGF did not show any correlation with calculated data from the curve. Conclusion: MVD showed correlations with several of the kinetic parameters. CEUS has the potential for prediction of tumor vascularity in a prostate cancer animal model.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.547-551
• /
• 2009

A new commercial rice variety "Chilbo" is a japonica rice (Oryza sativa L.) with resistance to rice stripe virus and high grain quality. It was developed by the rice breeding team of Yeongdeog Substation, NICS, RDA in 2007. This variety was derived from a cross between "Yeongdeog 26" with wind tolerance and lodging resistance and "Koshihikari" with good grain quality. A promising line, YR21324-119-3-2 was selected by a pedigree breeding method and designated as "Yeongdeog 44" in 2004. Regional adaptation yield trials were carried out at eleven locations from 2005 to 2007. As a result, "Yeongdeog 44" was released as a high yielding rice variety with high grain qualilty and virus resistance with the name of "Chilbo". It is short 76cm in culm length and has medium-late growth duration. This variety is resistant to stripe virus and middle resistant to leaf blast disease. It is also tolerant to cold, dried wind. Milled rice kernel of "Chilbo" is translucent, clear in chalkiness. Panel test proved that and it has good eating quality. Head rice ratio of Chilbo is high compared to the check variety, Hwaseongbyeo. Yield potential of "Chilbo" in milled rice is about 5.57MT/ha at ordinary fertilizer level of local adaptability test. This variety would be adaptable to Yeongnam plain, south & east-south coastal, south mid-mountainous, middle plain area of Korean peninsula.

• Journal of Korean Classical Literature and Education
• /
• no.35
• /
• pp.87-122
• /
• 2017

1) The passage "Sila seongdae so-seongdae cheonha daepyeong nahu-deog (新羅盛(聖)代 昭盛代 天下大平 羅侯德)" of the Korean Dynasty , corresponds to the primary passage of Cheonyong Rang Manghaesa(처용랑 망해사)>. These passages are ironic expressions of King Heongang's reign. This passage can therefore be interpreted as having the meaning of "People talk about King Heongang who ruined the kingdom. The bright politics of Silla's loyalty is the virtue of King Heongang." 2) "Cheoyong aba isi insaeng-ae sangbuleo hasilandae isi insaeng-ae samjaepalnan-i ilsi somyeol hasyatda (處容 아바 以是人生애 相(常)不語시란 以是人生애 相(常)不語시란 三災八難이 一時消滅샷다)." This was said by Cheoyong(처용), who was unable to reveal his anger while witnessing his wife being raped by Yuk-sin(疫神). This passage means, "Father Cheoyong(처용), in this world if a man does not express anger about the absurdity of the world, he can escape from catastrophe," or, "Father Cheoyong (처용), because in this world you had not expressed anger about the absurdity of world, you could escape from catastrophe." 3) In "maa-man maa-man haniyeo sibi jegug-i moda jiseo syeon aeu cheoyongbi-hal maa-man haniyeo (마아만 마아만 니여 十二諸國이 모다 지 셰온 아으 處容아비 마아만 니여)," the most likely interpretation of Maa is "마아(麻兒)," which means "scarecrow." In this way, this passage emphasizes that Cheyong(처용) is not a scarecrow, but a representative of the eyes of all people in all kingdoms. 4) In "meoja oeyaja logliya ppallina nae singohal maeyara (머자외야자 綠李야 리나 내 신고 야라", meoja (머자) is the double arranging shape of meotda(멎다), and oeyaja(외야자) is the double arranging shape of oeda(외다); those characters mean "ugly" and "wrong for each other." Additionally, Rokri(綠李) can be regarded as an administrator in blue or black clothes who is performing an errand of the yuksin(疫神).

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.447-453
• /
• 2019

In this study, the contamination of 4 types of heavy metals (lead, cadmium, arsenic, and mercury) was monitored in 80 seaweeds and their processed products, and a food safety assessment was also carried out for these heavy metals. Lead, cadmium and arsenic were analyzed by ICP-OES and mercury was analyzed by mercury analyzer. The detection ranges of heavy metals were found as follows: Pb (N.D-0.802 mg/kg), Cd (N.D-0.759 mg/kg), As (0.134-17.296 mg/kg), and Hg (0.0005-0.0331 mg/kg). Pb and Hg showed no significant differences among seaweeds whereas Cd and As were significantly higher in the species hizikia fusiforme (P<0.05). Food safety assessment from seaweed intake was measured by PTWI (Provisional Tolerable Weekly Intake), PTMI (Provisional Tolerable Monthly Intake), and MADL (Maximum Allowable Daily Body Load) as set by JECFA (Joint FAO/WHO Expert Committee on Food Additives). Pb and Hg were 0.197%, 0.036% of PTWI respectively, while Cd was 1.877% of PTMI and As was 0.619% of MADL. Therefore, it was found that heavy metal levels of seaweed were low and was considered to be safe for consumption.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.166-175
• /
• 2021

In this study, monokaryons of "Heukari" (Pleurotus ostreatus) and "Hosan" (Pleurotus pulmonarius) were separated to remove the cell wall, and a cross-species protoplast fusion was developed through chemical treatment with polyethylene glycol. The protoplast-fused PF160306 and PF160313 strains have a culture period of 10 and 2 days shorter than that of the "Heuktari" and "Hosan" cultivars, respectively. Furthermore, the growth of the strains was faster than that of the existing cultivars. The yield was 135.9 g per bottle, which was approximately 8% higher than that of the commercially available "Hosan" cultivar; however, it was not statistically significant. A growth survey was conducted after treatment at five temperatures (15, 18, 21, 23, and 25℃). The growth of the strains accelerated with the increase in temperature. However, at 21℃, the yellow color of pileus was the brightest. Band pattern, assessed using URP Primer 7, was similar to that of the "Hosan" cultivar. The DPPH radical scavenging capacity and polyphenol content were 62.5% and 43.5 mg/mL, respectively, for "Sunjung" and 65.7% and 49.9 mg/mL, respectively, for PF160313. Furthermore, the antihypertensive activities of the "Sunjung" cultivar and PF160313 were similarly high at 74% and 75%, respectively. In conclusion, cross-species hybridization via the protoplast fusion technique can be used for obtaining primary data for mushroom breeding to develop new varieties. In addition, the protoplast fusion technique might aid in expanding the market for yellow mushrooms.