• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.427-428
• /
• 2009

무선 네트워크 환경에서 합법적인 AP(Access Point)의 MAC 주소, SSID(Service Set Identifier), 채널등의 정보를 이용하여 복제된 AP(Cloned Access Point)를 만들 수 있다. 복제된 AP는 합법적인 AP와 연결되어 있는 무선 스테이션들의 연결 설정을 끊고 자신과 연결 설정을 하게 한다. 무선 스테이션들이 복제된 AP와 통신을 하게 되면서 많은 공격으로부터 노출되게 된다. 본 연구에서는 복제된 AP가 설치되었을 때 무선 스테이션들이 합법적이 AP의 비콘 프레임과 복제된 AP 비콘 프레임의 시퀀스 번호를 이용하여 복제된 AP을 판별하였다. 시뮬레이터 NS-2를 이용하여 실험한 결과 본 논문에서 제안하는 메커니즘을 통해 무선 스테이션들이 복제된 AP의 등장을 판별할 수 있게 되어 보다 안전한 무선랜 환경을 구축할 수 있게 되었다.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.217-223
• /
• 2004

This paper proposes a new backoff scheme to improve the throughput of stations over wireless local area networks. It is designed to carry out the proposed backoff scheme using information of basic service area, such as number of stations, in terms of the throughput. Basic idea of the proposed backoff scheme is that we change the contention window size for backoff time as collisions increase. We evaluate the performance of the proposed backoff scheme using Markov model analysis and compare it with the IEEE 802.11e backoff scheme. The numerical results indicate that the Proposed backoff scheme may offer better performance than the conventional backoff scheme in terms of the throughput.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.289-291
• /
• 2002

100Mbps의 전송속도를 만족하는 TDMA 방식의 전송 방식의 MAC을 연구중이다. 현재까지 진행된 MAC에 대한 간단한 소개와 또 MAC 프레임의 구조를 설명하고 이를 개발하기 위하여 11Mbps급의 IEEE 802 11b 모뎀을 활용한 방법에 대하여 설명한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.149-158
• /
• 2006

We proposed a method for improving a performance of TCP downstream between a desktop PC as a fixed host and a PDA as a mobile host in a wired and wireless network based on IEEE 802.11x wireless LAN. With data transmission between these heterogeneous terminals a receiving time during downstream is slower than that during upstream by 20% at maximum. The reason is that their congestion window size will be oscillated due to a significantly lower packet processing rate at receiver compared to a packet sending rate at sender. Thus it will cause to increase the number of control packets to negotiate their window size. To mitigate these allergies, we proposed two distinct methods. First, by increasing a buffer size of a PDA at application layer an internal processing speed of a socket receive buffer of TCP becomes faster and then the window size is more stable. However, a file access time in a PDA is kept nearly constant as the buffer size increases. With the buffer size of 32,768bytes the receiving time is faster by 32% than with that of 512bytes. Second, a delay between packets to be transmitted at sender should be given. With an inter-packet delay of 5ms at sender a resulting receiving time is faster by 7% than without such a delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.421-430
• /
• 2006

In this paper, we propose a practical implementation of network-adaptive HD(high definition) MPEG-2 video streaming with a cross-layered channel monitoring(CLM) over the IEEE 802.11a WLAN(wireless local area network). For wireless channel monitoring, AP(access point) periodically measures the MAC(medium access control) layer transmission information and sends the monitoring information to a streaming server. This makes that the streaming server reacts more quickly as well as efficiently to the fluctuated wireless channel than that of the end-to-end monitoring(E2EM) scheme for the video adaptation. The streaming sewer dynamically performs the priority-based frame dropping to adjust the video sending rate according to the measured wireless channel condition. For this purpose, our streaming system nicely provides frame-based prioritized packetization by using a real-time stream parsing module. Various evaluation results over an IEEE 802.11a WLAM testbed are provided to verify the intended QoS adaptation capability The experimental results show that the proposed system can effectively mitigate the quality degradation of video streaming caused by the fluctuations of time-varying wireless channel condition.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.9-15
• /
• 2020

Wireless sensor nodes adopting the advanced preamble detection function, Message-In-Mesage (MIM), maximize the concurrent transmission opportunities due to the capture effect, result in improving the system performance significantly compared to the legacy IEEE 802.15.4 based sensor devices. In this paper, we propose an MIM capture probability model to analyze the performance gains by applying the MIM function to the wireless sensor nodes. We implemented the IEEE 802.15.4 and MIM by Python and performed extensive simulations to verify the performance gains through MIM capture effects. The evaluation results show that the MIM sensors achieve 34% system throughput gains and 31% transmission delay gains over the legacy IEEE 802.15.4-based sensors, which confirm that it was consistent with the analysis result of the proposed MIM capture probability model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.965-970
• /
• 2005

In this paper, SPDT Tx/Rx MMIC switch applicable to IEEE 802.11a WLAN systems is designed and fabricated using a specific designed epitaxial layered pHEMT wafer and ETRI's $0.5{\mu}m$ pHEMT switch process. The SPDT switch exhibits a low insertion loss of 0.68dB, high isolation of 35.64dB, return loss of 13.4dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V. The comparison of the measured performances with commercial products based on the GaAs pHEMT technology for low voltage operating at ${\pm}$ 3V/0V shows that the return loss is somewhat inferior to the commercial products and insertion loss is compatible with each other however, isolation characteristics are much better than in conventional chips. Based on these performances, we can conclude that the developed SPDT switch MMIC has an enough potential for IEEE802.11a standard 5 GHz-band wireless LAN applications.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.95-103
• /
• 2009

An efficient symbol time synchronization scheme for IEEE 802.11n MIMO-OFDM based WLAN systems using cyclic shift diversity (CSD) preamble is proposed. CSD is used to prevent unintentional beamforming when the same preamble signal is transmitted through transmit antennas. However, it is difficult to find a proper starting-point of the OFDM symbol with the conventional algorithms because of time offset by multi-peaks which are result from cross-correlation of received CSD preamble with a known short training symbol. In addition, the performance of symbol time sync. is affected by AGC and packet detection position. In this paper, an optimal symbol time synch. algorithm which is composed of the boundary detection scheme between LTS and OFDM symbols, the verification scheme for enhancement of boundary detection accuracy, and the SNR-varying threshold estimation scheme is proposed. Simulation result show that the proposed algorithm has performance gains of 4.3dB in SNR compared to the conventional algorithms at the rate of 1% sync. failure probability for $2{\times}2$ MIMO-OFDM system and 18dB at 0.1% when maximum frequency offset exists. It also can be applied to $4{\times}4$ MIMO-OFDM system without any modification. Hence, it is very suitable for MIMO-OFDM WLAN systems using CSD preamble.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1109-1119
• /
• 2009

WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Though existing IEEE 802.11e demonstrates that data rates exceed 54Mbps with assuring QoS(Quality of Service), wireless internet users can't be satisfied with real communication system. After IEEE 802.11e system, Study trends of IEEE 802.11n show two aspects, enhanced system throughput using aggregation among packets in MAC (Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PHY connection. Therefore, this paper adapts MIMO in PHY layer for IEEE 802.11n system based on A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer considering MAC and PHY connection. SVD(Singular Value Decomposition) method with WLAN MIMO TGn Channel is used to analyze MIMO. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use Ns-2(Network Simulator-2) considering MAC and PHY connection for reality.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.116-126
• /
• 2008

This paper describes the Dual-band WLAN transmitter with 2.4[GHz], 5[GHz]. Dual-band WLAN transmitter was designed at 2.4[GHz] and 5[GHz]. The Dual-band WLAN transmitter has a amplifier which operate at 2.4[GHz] and 5[GHz] frequency and two VCO(Voltage Controlled Oscillator) or VCO has a wide scope of frequency. these problem cause a size and a power consumption, The Dual-band WLAN transmitter module was proposed to solve these. the transmitter was designed to get output signals of IEEE 802.11a's 5.8[GHz] band signal using frequency multiplication way or to act a amplifier about the 2.4[GHz] band signal of IEEE 802.11b/g, according to inputed frequency and bias voltage that a eve using single transmission block. The output spectrum get the improved specification of ACPR of 4[dB], 6[dB], 16[dB] at +11[MHz], +20[MHz], +30[MHz] offset of center frequency compared to no linearization, was satisfied to transmit spectrum mask of IEEE 802.11a wireless Lan.