• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.996-1002
• /
• 2009

The EDCA scheme in IEEE 802.11 MAC protocols was adopted to support QoS of each traffic. The impact of legacy DCF stations on EDCA voice service is studied using extensive simulations. The maximum number of voice sessions are obtained in cases that IEEE 802.11b and IEEE 802.11a physical layers are used.

• Electronics and Telecommunications Trends
• /
• v.27 no.2
• /
• pp.1-10
• /
• 2012

최근 와이파이를 채용한 스마트폰에 대한 수요가 폭발적으로 증가함에 따라 무선랜에 기반한 새로운 신규 기술들이 활발히 연구되고 있다. Gbps 이상의 전송을 가능하게 하는 IEEE 802.11ac는 차세대 스마트폰을 위한 핵심 기술로서 기존의 IEEE 802.11n에서는 수용할 수 없었던 초고화질의 비디오 전송을 가능하게 한다. 또한 최근에는 무선랜을 사용하여 최대 수 km까지 광역으로 서비스를 지원하기 위한 광역 무선랜이 IEEE 802.11af 및 802.11ah에서 연구되고 있으며, 초기 링크 셋업 시간을 획기적으로 절감하기 위한 IEEE 802.11ai 기술도 활발히 논의되고 있다. 본고에서는 이러한 IEEE 802.11ac, IEEE 802.11af, IEEE 802.11ah, IEEE 802.11ai 무선랜 기술에 대한 표준화 추진 현황 및 주요 이슈들에 대해 기술하고자 한다.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.33-38
• /
• 2011

Current IEEE 802.11 standard is very vulnerable that between the AP and STA authentication and security mechanisms is widely known. Therefore, IEEE has proposed security architecture RSN (Robust Security Network) for 802.11. RSN is used the access control, authentication, and key management based on the IEEE 802.1X standard. In this paper, IEEE 802.1X or 802.11 a combination of several models proposed for the vulnerability, and session hijacking or MiM (Man-in the-Middle) attacks to respond, the authentication mechanism Was designed to the access control between the STA and the AP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2317-2322
• /
• 2009

In this paper, look into the applicable communication for unmanned vehicle system development, and make an alternative idea to IEEE 802.11a. "IEEE 802.11a" is differently from "IEEE 802.11b/g"-which used to 2.4GHz ISM band-as it use OFDM modulation system of 5GHz band, as contrasted with "IEEE 802.11b/g" of ISM band, it has advantage against falling-off the capability caused by interfered, and provide maximum 54Mbps communication speed. Made a priority tested Soft Roaming and Hard Roaming to ensure the sound boom of unmanned vehicle in the flat parking. According to the each effect value, Present a most suitable method of applicable to "IEEE 802.11a" to unmanned vehicle system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.2
• /
• pp.89-95
• /
• 2011

The distributed coordination function (DCF) and point coordination function (PCF) protocols are the basic MAC protocols for legacy IEEE 802.11, IEEE 802.11a, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g and IEEE 802.11n wireless LANs. When the DCF protocol is used for the various versions of IEEE 802.11 wireless LANs, the MAC performance seriously degrades due to the collisions among the stations (STAs) as more and more STAs attempt to transmit their data frames. On the other hand, the PCF MAC performance becomes poor when many STAs exist in IEEE 802.11 wireless LANs, however, only small number of STAs actually attempt to transmit their data frames. In this paper, we propose the algorithm for improving the MAC performance by selectively using the DCF and PCF protocols according to the state of IEEE 802.11 wireless LANs. Numerical examples are presented to show the MAC performance improvement by the selective use of the DCF and PCF protocols according to the network state.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4C
• /
• pp.330-335
• /
• 2008

This paper proposes a packet detection algorithm for IEEE802.11n system. IEEE802.11n is a multiple input multiple output (MIMO) system and we have to consider several combining techniques which are used in multiple receive antenna system. In this paper, we propose a hybrid packet detection algorithm which combines double sliding window algorithm or delay and correlation algorithm, that is used in single input single output (SISO) system, and multiple receive antenna combining algorithms, and simulated their performances in Iin system environments and shows the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.640-647
• /
• 2009

IEEE 802.11i is an amendment to the original IEEE 802.11/b,a,g standard specifying security mechanism by stipulating RSNA for tighter security. The RSNA uses TKIP(Temporal Key Integrity Protocol) and CCMP(Counter with CBC-MAC Protocol) instead of old-fashioned WEP(Wired Equivalent Privacy) for data encryption. This paper describes a design of a communication security engine for IEEE 802.11i MAC layer. The design includes WEP and TKIP modules based on the RC4 encryption algorithm, and CCMP module based on the AES encryption algorism. The WEP module suffices for compatibility with the IEEE 802.11 b,a,g MAC layer. The CCMP module has about 816.7Mbps throughput at 134MHz, hence it satisfies maximum 600Mbps data rate described in the IEEE 802.11n specifications. We propose a pipelined AES-CCMP cipher core architecture, which has lower hardware cost than existing AES cores, because CBC mode and CTR mode operate at the same time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2062-2068
• /
• 2006

In his paper, embedded system implementation for IEEE802.l1p based OFDM-DSRC is presented. After the IEEE802.11p physical layer specification is introduced and BER performance of the modem is evaluated by simulation, implementation aspects of the system such as system architecture, design method and implementation results are addressed. Implemented embedded system for the OFDM-DSRC communication consists of FPGA, flash memory, ARM9 CPU Core, peripherals, etc. from the results, it is shown that the implemented system operates well according to IEEE802.11p specification. It is expected that implemented embedded system shall be used for wireless communication system such as ITS application by enhancing system optimizing.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.54-61
• /
• 2012

The WAVE specification, which for the Next-Generation ITS environment is a common title: IEEE 802.11p and IEEE P1609 specifications. These days, there are many activities for researching WAVE specification by release of the IEEE 802.11p specification. The difference between high-speed vehicle environment and the indoor environment, the wireless communication channel mode is that much more severe. Thus, the wireless communication system design, temperature, noise, multipath fading and can degrade the performance of the system points should be fully considered matters of. In this paper, we showed WAVE wireless communication system which based on IEEE 802.11p PHY/MAC design process, and also showed solving process many implementation problems.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.387-394
• /
• 2005

Every MAC (Medium Access Control) sub-layers of IEEE 802.11x, including IEEE 802.11e, defines Connection-based and CF (Contention Free)-based service functions in common. In this paper, a New-CF method is proposed. In the proposed method, conventional Round Robin method, which is used as a polling method by IEEE 802.11x PCF (Point Coordination Function) or IEE 802.11e HCCA, is modified to give weights to channels with heavier traffic load and to provide those weighted channels with more services. Based on NS-2 simulations, it is verified the proposed method shows better throughput in general, particularly under unbalanced traffic load conditions.