• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.22-32
• /
• 2013

Wireless Sensor Network(WSN) has attracted great interest recently and the necessity of ZigBee has appeared to standardize and apply the upper layer specification based on the IEEE 802.15.4 standard specification in industrial field. Currently, there are many studies about the IEEE 802.15.4/ZigBee communication channel. And it is subject of interest to analyze the performance in various channel environments. In this paper, we propose channel models through the analysis of the IEEE 802.15.4 radio wave propagation characteristics in various channel environments. Also, we have analyzed the performance of the IEEE 802.15.4/ZigBee for the standard of physical layer of 2.4GHz band in each channel environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.115-121
• /
• 2017

Times New RomanThe utilization of Information and Communication Technologies (ICT) in the smart grid application can construct efficient and reliable electrical grid. IEC 61850 was adopted as the standard for smart grid exchanging the information required in an electric power utility. However, applying technologies like IEC 61850 using Ethernet to the automation of small distribution substation directly may cost more than the value of the small distribution substation itself. IEEE 802.15.4 technology attracts attention in the field of power utility automation because of low installation cost and ease of installation. Studies are conducted, which use IEEE 802.15.4 in less strict D1 small distribution substation. This study applied IEEE 802.15.4 to the small distribution substation and conducted performance evaluation using the actual equipment. This study determined the scope of application of IEEE 802.15.4 by conducting a comparative analysis of the message type in IEC 61850.

• Journal of Internet Computing and Services
• /
• v.14 no.4
• /
• pp.13-24
• /
• 2013

IEEE 802.15.4 network and WiFi network are installed to overlap each other and configured to use adjacent frequency bands in which case the communication service required by applications can not be guaranteed because of randomly increased frame transmission delay and frequent frame transmission failures at nodes in IEEE 802.15.4 network. In this paper, transmission delay model at IEEE 802.15.4 nodes and an experimental system to evaluate the interference from WiFi traffic are described, then elements for the evaluation of interference are measured with the analysis of their characteristics. A sequential method of using medium access layer and physical layer elements of IEEE 802.15.4 protocols is proposed to decide interference from WiFi network. With the proposed method, if an evaluation function having frame transmission failures and transmission delay as variables returns a value greater than a threshold, intensive measurements of wireless channel power are carried out subsequently and the final decision of interference is made by the calculated average channel power. Experimental results of the method show that the decision time is reduced with increased frequency of decision in comparison to an other similar method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.412-420
• /
• 2006

With the appearance of various types of traffic services in communication networks, a study on QoS(Quality of Service) packet scheduling mechanisms which can support differentiated service to each traffic service becomes very important. To meet this requirement, IEEE 802.11 Working Group established the IEEE 802.11e MAC protocol which categorizes every traffic services into 4 access categories(AC) and provides the differentiated service to each AC. In addition, the physical layer of IEEE 802.11a/g standards provide up to 54 Mbps transmission rate per one wireless LAN terminal. However, since the radio resource is hardly limited in wireless channel, it is necessary to find an efficient packet scheduling scheme to maximize the transmission efficiency. Therefore, in this paper, we proposed a new packet scheduling scheme that can enhance the total throughput by setting different contention windows(CW) of CSMA-CA channel access scheme to each wireless LAN terminal according its current channel states. Numerical results derived from using NS-2 network simulator have shown that our proposed packet scheduling scheme can enhance the performance of IEEE 802.11e more and more.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.702-704
• /
• 2010

Wireless LAN(Local Area Network) environment to support QoS in IEEE802.11 Working Group has standardized on the IEEE 802.11e. IEEE 802.11e EDCA channel access of the high priority traffic as by raising the probability of a chance to support QoS. This is a high priority traffic than low priority traffic, channel access is not necessarily the first. Therefore, as all traffic channels, if you have the same routing path, lower priority traffic on the performance of high priority traffic, sustainable impact. As a result, EDCA, such as voice or video to guarantee QoS for multimedia applications, follow the crowd. In this paper, to solve these problems by using Multi-Interface Multi-Path Routing Algorithm is proposed. Interface for each use in IEEE 802.11e EDCA Access Category much differently by each of the Routing Path for high priority traffic and guarantee QoS.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.6
• /
• pp.85-96
• /
• 2003

Wireless LAM in itself is vulnerable to eavesdropping and modification attack, and thus, IEEE 802.11i and IEEE 802. 1x/1aa have been defined to secure the wireless channel. These protocols accompanied by RADIUS and EAP-TLS provide users of wireless LAM with integrity and confidentiality services, and also they perform authentication and access control of wireless ports. In this paper, we suggest a method to implement accounting session using authentication session of IEEE 802. 1x and accounting state machine is designed with the accounting session. Also, we propose a key exchange mechanism to establish secure channel between stations and an access point. The mechanism is designed to be inter-operable with IEEE 802. 1aa.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.5
• /
• pp.520-525
• /
• 2014

When the PCF (Point Coordinated Function) MAC protocol is combined with the frame aggregation method to enhance the MAC performance in IEEE 802.11 wireless LANs, the formulae for the optimal frame aggregation level for best PCF MAC performance were derived in our previous study. We extend the formulae for the PCF protocol to derive the optimal frame aggregation level for the connectivity-based multipolling MAC protocol in IEEE 802.11 wireless LANs. By simulations, we compare the performances of IEEE 802.11 wireless LANs with the optimal and random frame aggregation levels. Compared with the random frame aggregation level, the optimal frame aggregation level significantly improves the performance of IEEE 802.11 wireless LANs.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.336-340
• /
• 2007

This paper proposes a multicast scheme over IEEE 802.16 networks which support multiple upper layer protocols such as ATM, IPv4 packets, IPv6 packets, IEEE 802.3 over IPv4 and so on. The multicast capabilities over IEEE 802.16 are important both control plane and data plane. The proposed multicast scheme can be divided into two types: direct mapping and indirect mapping. The direct mapping scheme is that layer 3 address is directly mapped into CID information which is used for connection identifier at IEEE 802.16 link layer. The indirect mapping scheme has two steps for mapping between layer 3 address and layer 2 CID. Firstly, a layer 3 address translates to Ethernet MAC address with group MAC address. Secondly, a group MAC address is mapped into CID. The mapping scheme depends on the upper layer protocols.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.679-686
• /
• 2008

Wireless LAN(WLAN) is a rather mature communication technology connecting mobile terminals. IEEE 802.11 is a representative protocol among WLAN technologies. With the rising popularity of delay-sensitive real-time multimedia applications(video, voice and data) in IEEE 802.11 wireless LAN, it is important to study the MAC layer delay performance of WLANs. In this paper, performance for packet delay model that recently have been proposed schemes is analysed in wireless LAN and proved performance results via simulation.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.24-34
• /
• 2010

본 고에서는 IEEE 802.16m 표준 및 기술 동향에 대해서 개관한다. 현재 상용화된 IEEE 802.16e 시스템에서 진화된 IEEE 802.16m 시스템은 IMT-2000을 대체할 차세대 이동 통신 시스템을 목표로 한다. 이런 요구 사항을 만족시키기 위해 우선 IEEE 802.16m 시스템은 IEEE 802.16e 시스템과의 호환성이 유지되어야 하며, 차세대 통신 시스템 표준으로 추진 중인 IMT-Advanced 시스템의 성능 요구사항을 만족시켜야 한다. 이와 같은 목표 달성을 위해 물리 계층 및 MAC 계층에서 다양한 기술들이 고려되었고, 본 고에서 전반적인 기술들에 대해서 간략히 살펴보도록 한다. 더불어, ITU-R에 제출한 IMT-Advanced 제안서의 결과를 토대로 IEEE 802.16m 시스템의 성능을 살펴보도록 한다.