• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.112-114
• /
• 2004

최근에 널리 사용되고 있는 IEEE 802.l1b의 QoS보장은 중요한 기술적 이슈가 되고 있다. IEEE 802.l1b의 QoS를 보장하기 위한 정책을 효율적으로 수립하기 위해서는 현재 채널에서의 사용 가능한 대역폭을 예측할 수 있어야 한다. 본 논문은 기존에 제시 되었던 IEEE 802.l1b의 채 널 saturation 대역폭 모델을 확장하여 채널 상태의 모니터링을 기반으로 한 현재 의 채널에서 사용 가능한 대역폭의 예측 모델을 제안한다. 또한 실제 무선 환경을 구현하여 실험한 결과와 제안한 모델에서의 결과 비교를 통해 제안한 모델이 채널의 가용 대역폭을 효과적으로 예측할 수 있음을 확인하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.124-126
• /
• 2004

본 논문은 CAM(Constant Awake Mode), 및 PSM(Power Saving Mode)을 지원하는 IEEE 802.l1b[1] Infrastructure 환경에서 전송 프로토콜이 이동기기의 WNIC(Wireless Network Interface Card) 에너지 소비에 미치는 영향을 분석하고 단위 시간 동안 전송되는 데이터 양에 기반한 IEEE 802.l1b WNIC 에너지 모델을 제안한다. 제안하는 에너지 모델은 IEEE 802.l1b 환경에서 CAM 및 PSM 모드를 사용할때, 실제 측정한 값을 기반으로 설계되었다. 제안된 에너지 모델은 실험을 통하여 정확성을 검증하고, IEEE 802.l1b를 기반으로한 저전력 통신 관련 연구에서 시뮬레이션 시 사용 가능한 에너지 모델임을 밝힌다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.365-372
• /
• 2007

In IEEE 802.11b wireless network, stations synchronize themselves to the beacons periodically sent by the access point(AP) when they are running in low power mode. In case of missing beacon due to noise or traffic from neighboring wireless network stations must be awake until they get the next beacon, which causes energy consumption in stations. In this paper, we propose a scheme searching next beacon consuming little energy. The problems of missing beacon in low power mode of IEEE 802.11b wireless interface are described and a new method to reduce energy consumption is proposed. The proposed method is simulated with the network simulator, ns2, and compared with the low power mode of the IEEE 802.11b. The result measured in terms of station's wakeup time shows some enhancement in energy consumption when some errors occur in receiving frames.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.313-315
• /
• 2004

본 논문은 IEEE 802.l1b 유무선 환경 에 서 TCP를 이용한 데이터 전송 시 에이젼트를 이용하여 패킷 손실의 원인을 분석, 무선 링크에서 발생한 패킷 손실에 대해서는 혼잡 윈도우 크기를 유지하고, 유선 링크에서 발생한 패킷 손실에 대해서는 지역 재전송을 수행하는 저전력 전송 기법을 제안하고 실제 구현한다. 제안하는 저전력 전송기법 은 전송 후 WNIC를 저 전력 모드로 전환 시킴으로써 WNIC 전력 소비를 최소화 한다. 실험 결과 높은 무선 링크 에러율(1~2%)에서 기존 TCP-Reno 보다 약 18% 에너지 감소 효과를 나타냈다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8B
• /
• pp.755-761
• /
• 2004

Currently, Wireless LAN(WLAN) service is widely deployed to provide high speed wireless Internet access through the mobile stations such as notebook and PDA. To provide enhanced security and user access control in the public WLAN area, WLAM access points should have the capability of IEEE 802.1x-based user authentication and authorization functionality. In this paper, we provide a brief understanding of IEEE 802. 1x standards and related protocols likeEAPoL(Extended Authentication Protocol Over LAN), EAP, RADIUS and describe how the IEEE 802.1x is designed and implemented in our embedded linux-based WLAN AP which is named i-WiNG.(Intelligent Wireless Internet Gateway).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.155-159
• /
• 2004

This paper describes the design and the simulation of a single pole double throw(SPDT) FET switch for wireless LAN(IEEE802.11a ＆ IEEE802.11b) applications using drain impedance transformation network with Microstrip transmission line. At the receiving path insertion losses were from 0.8(㏈) to 1.462(㏈) between 2(㎓) and 4(㎓), from l.26(㏈) to 2.3(㏈) between 4.7(㎓) and 6.7(㎓) and the isolations were under 30(㏈) between 2(㎓) and 6.7(㎓). At the transmitting path insertion loss were from 1.18(㏈) to 2.87(㏈) between 2(㎓) and 4(㎓) from 0.625(㏈) to 1.2(㏈) between 4.7(㎓) and 6.7(㎓) and the isolations were under 30(㏈) between 2(㎓) and 6.7(㎓).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1189-1199
• /
• 2004

In this paper, we explain the development procedure for a WLAN (IEEE 802.l1b Wireless Lan) handoff simulator using OPNET Modeler 9.0 and analyze the handoff performance when TCP and UDP traffic is applied. Because the BSS (Basic Service Set) is set only once at the beginning of a simulation in WLAN model supported by OPNET Modeler 9.0, the discontinuation of the communication between MS (Mobile Station) and AP (Access Point) is occurred by the migration of the MS from one BSS to another. We implement a handoff simulator based on this WLAN model and analyze handoff performance in various scenarios Also, we propose a new handoff algorithm which prevents TCP timeout by analyzing the problems of the handoff using the simulator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.49-56
• /
• 2006

This paper describes the design and the verification of IEEE 802.15.4 LR-WPAN 2.4GHz Physical layer for Ubiquitous Sensor Network(USN). We designed the Carrier Frequency Offset(CFO) compensation satisfied the frequency tolerance of IEEE 802.15.4 LR-WPAN and the adaptive matched filter that re-setting of the threshold for the symbol synchronization of the various USN environment. The multiplications is reduced 1/16 by this method each other at i, q phases and has 0.5dB performance improvement in detection probability. Proposed baseband system is designed with verilog HDL and implemented using FPGA prototype board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.974-979
• /
• 2004

In the IEEE 802.1 Ib, DCF provides contention based services and PCF provides contention free services for QoS suppof. DCF uses CSMA/CA (Carrier Sense Multiple Access/collision Avoidance) as an access protocol. In this paper, an enhanced PCF, which gives weights to channels with heavy traffic load, was proposed. The weight is depending on the partial queue length information from STAs. NS-2 simulation results show that the proposed scheme is an promising approach for enhancing the PCF.