• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.155-159
• /
• 2004

This paper describes the design and the simulation of a single pole double throw(SPDT) FET switch for wireless LAN(IEEE802.11a ＆ IEEE802.11b) applications using drain impedance transformation network with Microstrip transmission line. At the receiving path insertion losses were from 0.8(㏈) to 1.462(㏈) between 2(㎓) and 4(㎓), from l.26(㏈) to 2.3(㏈) between 4.7(㎓) and 6.7(㎓) and the isolations were under 30(㏈) between 2(㎓) and 6.7(㎓). At the transmitting path insertion loss were from 1.18(㏈) to 2.87(㏈) between 2(㎓) and 4(㎓) from 0.625(㏈) to 1.2(㏈) between 4.7(㎓) and 6.7(㎓) and the isolations were under 30(㏈) between 2(㎓) and 6.7(㎓).

• Journal of Digital Contents Society
• /
• v.12 no.3
• /
• pp.299-307
• /
• 2011

The MAC of IEEE 802.11 WLAN to control data transmission uses two control methods called DCF and PCF. The DCF controls the transmission based on CSMA/CA The BEB backoff algorithm of DCF shows relatively excellent performance in situation that the number of competing station is less, but has a problem that performance of throughput and delay is degraded in situation that the number of competing station is increased. This paper mathematically analyzes an MIMD backoff algorithm considering retry limit that increases the CW to doubled after collision and decreases smoothly the CW to halves after successful transmission in order to reduce the collision probability. To prove efficiency of the MIMD backoff algorithm, lots of simulations are conducted and analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.892-896
• /
• 2011

This paper proposes a two-stage synchronization scheme using a serial search non-coherent correlator appropriate for the IEEE 802.15.4a system. The proposed method improved the synchronization performance by using multi-pulse signals unlike the conventional method using single-pulse signals. It also compensated for the degradation of performance at low SNR resulting from the use of fixed threshold by applying the adaptive threshold technique. The proposed method showed a detection probability that is higher by approximately 0.2-0.3 compared with the conventional method in the IEEE 802.15.4a channel model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.568-575
• /
• 2011

In this paper, we propose a small broadband antenna for mobile device. The proposed antenna consists of a printed rectangular monopole antenna and a parastic element connected to ground using narrow meander line and it is designed on a FR-4 substrate that has a thickness of 0.8 mm and a dielectric constant of 4.4. The FR-4 substrate's size is 50 mm${\times}$90 mm comparable to the real mobile device. The fabricated antenna's size is 12.5 mm${\times}$10.5 mm${\times}$0.8 mm and the measurement shows -10 dB return loss bandwidth of 2,200~6,000 MHz and gains of 2.86~4.01 dBi. Accordingly, the proposed antenna can support mobile device for WiBro(2,300~2,380 MHz), WLAN(IEEE 802.11b/g/n: 2,400~2,480 MHz, IEEE 802.11a: 5,150~5,825 MHz), and mobile WiMAX(IEEE 802.16e : 2,500~2,690 MHz, 3,400~3,600 MHz) service bands.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.357-366
• /
• 1994

The IEEE 802.4 token bus has been widely accepted as the standard for factory local area networks. The priority option of the 802.4 standard supports multiple classes of traffic by using a set of timers to control information exchange. The performance of the 802.4 priority mechanism in industrial real time control is examined. A timer assignment technique is presented for such applications. The timers are set to satisfy the worst case access delay requirements of real time control applications. Other applications that are not time constrainted can be supported simultaneously. In fact under certain conditions, such applications can also be guaranteed a minimum bandwidth allocation. Simulation results are used to evaluate the timer assignment and utililization.

• Information and Communications Magazine
• /
• v.20 no.2
• /
• pp.31-41
• /
• 2003

UWB 무선기술은 초광대역 특성에 의한 높은 전송속도와 기존의 무선장치들과 상호 간섭영향 없이 주파수를 공유하여 사용할 수 있다는 장점 때문에 새로운 방식의 근거리 무선통신 기술로 급부상되고 있다. 특히 IEEE802.15.3에서 UWB 무선기술을 WPAN으로 사용하기 위한 표준화 작업이 진행되고 있어 현재 가장 널리 사용되고 있는 IEEE802.11 및 Bluetooth 장치와 향후 실내 환경에서 공존할 가능성이 매우 높아지고 있으며 이에 따른 장치 상호간 간섭영향 평가가 요구되고 있다. 본 논문에서는 2.4 GHz 대역 IEEE 802.11b 무선랜 장치를 사용하는 실내 환경에서 UWB 무선장치가 공존할 경우 무선랜 장치의 Packet Failure Rate 및 Throughput 측정을 통해 UWB 신호가 무선랜 장치에 미치는 간섭영향을 분석하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.80-83
• /
• 2010

As the recent development of mobile technology, users want to multi-service in anytime, anywhere, any terminal. To meet the needs of users, it causes a lot of expense that redesign of the entire network or expand the network of services areas. Therefore, IEEE, IETF is offering Handover technology between Heterogeneous Network. In this paper, the IEEE 802.21 MIH Information Server is based on the network. It proposes an improved Handover that L3 layer to optimize the Handover process use of FMIPv6 and executes simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.820-827
• /
• 2010

In these days, video applications for special purposes such as video conference systems among multiple users and video surveillance systems require multiple video connections and QoS guarantee. The video systems employ IEEE 802.11 Wireless LAN devices to support broadband wireless interfaces and easy internet accesses for cheaper prices. However, according to the current IEEE 802.11e HCCA standard, if more than three video sessions are established in WSTA services, some of them must share the TXOP because the available number of TSIDs for video transmission is two. In order to resolve the problem, we devised a method which can establish up to 15 video sessions by slightly modifying the frame structure while maintaining the compatibility with current standard. Our method is implemented on the NCTUns 4.0 network simulator, and evaluated not only numerically in terms of throughput, delay, and PSNR, but also experimentally in the sense of real video clips that are used as input to our simulation. The results showed that our method sufficiently guarantees the transmission bandwidth requested by each video session.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.39-44
• /
• 2005

The OFDM modulation and transmission block have been modeled in order to analyse the relationship between the 2.4GHz power amplifier distortion and output ACPR for the IEEE 802.11g wireless LAN. The nonlinear characteristic of the power amplifier has been modeled as AM-to-AM and AM-to-PM using the behavioral model, and the output spectrum is analysed with the phase distortion variation. Also, amplifier back-off value from P1dB to satisfy the required IEEE 802.11g standard spectrum mask s been simulated with modeled phase distortion, and the simulation data have been compared to the measured result by using the pre-distortion technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.188-194
• /
• 2007

In order to become ubiquitous world, the compatibility of wireless machines has become the significant characteristic of a communication terminal. Thus, SDR is the most necessary technology and standard. However, among the environment which has different communication protocol, it's difficult to make a terminal with only hardware using ASIC or SoC. This paper suggests the processor that can accelerate several communication protocol. It can be connected with main-processor, and it is specialized PHY layer of network The C-program that is modeled with the wireless protocol IEEE802.11a and IEEE802.11b which are based on widely used modulation way; OFDM and CDM is compiled with ARM cross compiler and done simulation and profiling with Simplescalar-Arm version. The result of profiling, most operations were Viterbi operations and complex floating point operations. According to this result we suggested a co-processor which can accelerate Viterbi operations and complex floating point operations and added instructions. These instructions are simulated with Simplescalar-Arm version. The result of this simulation, comparing with computing only one ARM core, the operations of Viterbi improved as fast as 4.5 times. And the operations of complex floating point improved as fast as twice. The operations of IEEE802.11a are 3 times faster, and the operations of IEEE802.11b are 1.5 times faster.