• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.3
• /
• pp.27-35
• /
• 2011

Design of Sensor nodes in Wireless Sensor Network(WSN) should be considered some properties as electricity consumption, transmission speed, range, etc., and also be needed the protection against various attacks (e.g., eavesdropping, hacking, leakage of customer's secret data, and denial of services). The stream cipher Rabbit, selected for the final eSTREAM portfolio organized by EU ECRYPT and selected as algorithm in part of ISO/IEC 18033-4 Stream Ciphers on ISO Security Standardization recently, is a high speed stream cipher suitable for WSN. Since the stream cipher Rabbit was evaluated the complexity of side-channel analysis attack as 'Medium' in a theoretical approach, thus the method of power analysis attack to the stream cipher Rabbit and the verification of our method by practical experiments were described in this paper. We implemented the stream cipher Rabbit without countermeasures of power analysis attack on IEEE 802.15.4/ZigBee board with 8-bit RISC AVR microprocessor ATmega128L chip, and performed the experiments of power analysis based on difference of means and template using a Hamming weight model.

• Journal of Computing Science and Engineering
• /
• v.2 no.4
• /
• pp.412-427
• /
• 2008

We propose ID-exchange protocol for Connectionless Location-Awareness Service (CLAS) to locate mobile nodes in indoor sensor network. When adapting location-awareness service to sensor network, the target system must be designed in accordance with various metrics which reflect the system requirement. We especially consider sustainability of the existing service which has been provided for its original purpose, such as environmental monitoring. The detailed meaning of sustainability here is that, even if location-awareness service is newly added to the existing service, the system must be assured to retain a stable network condition, and to deal with newly caused traffic properly. The CLAS ID-exchange protocol is especially designed for fixture and mobile nodes communication to achieve these properties. The protocol operates on 802.15.4 MAC layer to make mobile node work independently of the procedure to build routing table of fixture node, so a stable routing condition can be achieved even if there are many mobile nodes. Moreover, the dedicated frequency channel is assigned only for this protocol, so that traffic caused by location-awareness service can be distributed to another channel. A real system adapting the protocol was implemented to monitor fire and authorities' positions. We verified the overhead and elapsed time for location-awareness. The result shows the proposed protocol has a high performance in detecting speed, traffic distribution, and stability of overall network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1290-1297
• /
• 2019

The paper proposes a distance estimation technique for ultra-wideband (UWB) systems using convolutional neural network (CNN). To estimate the distance from the transmitter and the receiver in the proposed method, 1 dimensional vector consisted of the magnitudes of the received samples is reshaped into a 2 dimensional matrix, and by using this matrix, the distance is estimated through the CNN regressor. The received signal for CNN training is generated by the UWB channel model in the IEEE 802.15.4a, and the CNN model is trained. Next, the received signal for CNN test is generated by filed experiments in indoor environments, and the distance estimation performance is verified. The proposed technique is also compared with the existing threshold based method. According to the results, the proposed CNN based technique is superior to the conventional method and specifically, the proposed method shows 0.6 m root mean square error (RMSE) at distance 10 m while the conventional technique shows much worse 1.6 m RMSE.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8A
• /
• pp.712-722
• /
• 2011

Wireless body area network(WBAN) provide communication service in the vicinity of the body. Since WBANs utilize both MICS frequency band for implant medical applications and ISM frequency band for medical and consumer electronics(CE) applications. Therefore, MAC protocols in WBAN should be designed considering flexibility between medical and CE applications. In this paper, we identify the requirements of WBAN MAC protocols and propose a WBAN MAC protocol which satisfies the requirements. In other to provide transmission flexibility for various applications. we present the dynamic CFP allocation and opportunity period. Extensive simulation result show that the proposed protocol achieves improved throughput and latency in WEAN environment cimpared with IEEE 802.15.4.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.189-196
• /
• 2011

The main issues of the researches are monitoring environment such as weather or temperature variation and natural accident, and sensor gateways which have mobile device, applications for mobile health care. In this paper, we propose the SFMS(Smart Factory Management System) that can effectively monitor and manage a green smart factory area based on M2M service and smart phone with android OS platform. The proposed system is performed based on the TinyOS-based IEEE 802.15.4 protocol stack. To validate system functionality, we built sensor network environments where were equipped with four application sensors such as Temp/Hum, PIR, door, and camera sensor. We also built and tested the SFMS system to provide a novel model for event detection systems with smart phone.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.7-17
• /
• 2015

To provide scalability, wireless sensor network has cluster-based architecture. Wireless sensor network can be implemented based on the IEEE 802.15.4 which is exploited in 2.4GHz ISM frequency band. Since this frequency band is used for various data communication, network status of wireless sensor networks frequently changes according to wireless environment. Thus, wireless channel selection to avoid reduction of transmission efficiency is required. This paper estimates network status using the information that a cluster-head collects in a cluster. Through objective function with throughput, RSSI level and reliability as input parameters, this paper proposes proper wireless channel selection. Simulation results show that the proposed method maintains transmission efficiency even though network status changes.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.169-176
• /
• 2006

Since home network system is usually set up based on the built-in system inside home at the time of construction, it has a difficulty in being compatible with new devices after construction. In this paper, we propose DBS(Dynamic Binding System) that can make links effectively among the devices located in inside and outside of home networks. Implementation of the DBS is based on the ZigBee's binding in WPAN(Wireless Personal Area Network). For this research, we constructed the system consisting of home server that contains proxy server and location server, devices inside home in which tinyOS is embedded, and mobile device that is an emulator. The communication inside home is done by IEEE 802.15.4 protocol and the communication between servers and mobile devices outside home is done by TCP/IP protocol. Regardless of device's address format, the DBS facilitates a link among the devices located inside and outside of home networks. And, introducing a new device into home network can be recognized easily by exchanging messages between devices.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.59-65
• /
• 2007

Recently, ubiquitous sensor network(USN) techniques have been applied to electric power facility management. This paper dealt with the designed and fabricated ubiquitous sensors which monitor transformers and lightning arresters installed in overhead distribution systems. The sensors consist of a 8-[bit] microprocessor unit, a wireless communication nodule specified in IEEE 802.15.4, and associated electronics. A Rogowski coil was fabricated to measure load of transformer and surge current without saturation having good linearity up to 1000[A]. A zero-phase current transformer with a high relative permeability of $10^5$ at 180[Hz] was used to detect small leakage current of $50[{\mu}A]{\sim}1[mA]$ flowing lightning arrester, and the frequency bandwidth of the module is ranges from 12[Hz] to 1.24[kHz] at -3[dB].

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.41-48
• /
• 2008

The realization of a monitoring system for senior citizens living alone through wireless sensor network. Due to the recent advances in medical science, people live longer than ever before which accelerates the number of senior citizens. The high rate of the old people in population causes some changes in the form of families, which results in the increasing number of old people living by themselves. This also causes a lot of social problems concerning aging population. For example, people found a dead body of 83-year-old, who had lived alone, after he passed away a month before. There is a national monitoring service for the old people of their daily lives, but the application of such system is very limited. Considering this, the current paper focuses on the realization of a monitoring system for senior citizens living alone through wireless sensor network. The system consists of ZigBee sensor network, which is based on standard IEEE 802.15.4. and the system uses Tmote Sky sensor mote made by Moteive, which is installed with TinyOS. The circumstances information data will be saved on DB and a household will be monitored through a Webpage or Mobile.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.273-279
• /
• 2014

In this paper, we propose a novel algorithm for three dimensional positioning system and implement a system over indoor wireless channel. A commercial modules are used for mobile and fixed nodes which are product of German company Nanotron Co. This module adopts chirp spread spreading scheme as modulation method to improve the ranging resolution and the module satisfies the IEEE standard 802.15.4a. The distance computation is based on received signal strength(RSS) levels and trilateration method. A testbed was set up to measure and compare the positioning estimation error of the proposed algorithm. The experiments results showed that the accuracy of location estimation was sufficiently good as much as 1m distance error in a wireless environment in an office building.